User's Manual

MC92N0-G SERIES
REGULATORY
GUIDE
Motorola reserves the right to make changes to any product to improve reliability,
function, or design. Motorola does not assume any product liability arising out of, or
in connection with, the application or use of any product, circuit, or application
described herein. No license is granted, either expressly or by implication, estoppel,
or otherwise under any patent right or patent, covering or relating to any
combination, system, apparatus, machine, material, method, or process in which
Motorola products might be used. An implied license exists only for equipment,
circuits, and subsystems contained in Motorola products.
Warranty
For the complete Motorola hardware product warranty statement, go to:
http://www.motorolasolutions.com/warranty.
Service Information
Before you use the unit, it must be configured to operate in your facility’s network
and run your applications.
If you have a problem running your unit or using your equipment, contact your
facility’s Technical or Systems Support. If there is a problem with the equipment, they
will contact the Motorola Solutions Global Customer Support at
http://www.motorolasolutions.com/contactsupport.
For the latest version of this guide go to: http://supportcentral.motorola.com
Motorola Solutions, Inc.
1301 E. Algonquin Rd.
Schaumburg, IL 60196-1078, U.S.A.
http://www.motorolasolutions.com
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are
trademarks or registered trademarks of Motorola Trademark Holdings, LLC
and are used under license. All other trademarks are the property of their
respective owners.
© 2012 Motorola Solutions, Inc. All Rights Reserved.
72-161752-01 Revision A — July 2012
1 2 3 4
Regulatory Information
This device is approved under the Motorola Solutions, Inc.
This guide applies to the following Model Number: MC92N0.
All Motorola devices are designed to be compliant with rules and regulations in
locations they are sold and will be labeled as required.
(EN) Local language translations are available at the following website: http://
supportcentral.motorola.com
(BP) Documentos traduzidos podem ser encontrados no site: http://
supportcentral.motorola.com
(DE) Übersetzungen in die Landessprache sind auf der folgenden Website
verfügbar: http://supportcentral.motorola.com
(ES) Las traducciones en diferentes idiomas están disponibles en el sitio Web
siguiente: http://supportcentral.motorola.com
(FR) Les versions traduites des manuels sont disponibles à l'adresse suivante: http:/
/supportcentral.motorola.com
(HR) /RNDOQLMH]LNSUHYRÓHQMHMHVXUDVSRORŀLYDWVOLMHGHÉH website: http://
supportcentral.motorola.com
(IT) Le traduzioni nelle lingue locali sono disponibili presso il sito Web: http://
supportcentral.motorola.com
-3⚓岏崭ቊቑ㍔⫀ቒᇬⅴₚቑ㆙䯍:HEኒኁእቊሷ䭉崜ሲቃሸሧᇭKWWS
VXSSRUWFHQWUDOPRWRURODFRP
.2뾹덵꽭꽩ꈑ꘽꾢鷑ꓭ꫑鱉 KWWSVXSSRUWFHQWUDOPRWRURODFRP꾅꫑쀊넭뼕ꯍ
넽걪鱽鲙
(RU) : http://
supportcentral.motorola.com
TC㌷♾ⅴ⦷ₚᗼ偁䵨♥㈦䠅⦿崭岏䤓劊巾᧶KWWSVXSSRUWFHQWUDOPRWRURODFRP
SC㌷♾⅝ₚ⒦几䵨噆㈦㦻⦿▥幠㠖᧶KWWSVXSSRUWFHQWUDOPRWRURODFRP
(TR) <HUHOGLO©HYLULOHULDġDáóGDNLZHEVLWHVLQGHQEXOXQDELOLU: http://
supportcentral.motorola.com
Any changes or modifications to Motorola equipment, not expressly approved by
Motorola, could void the user’s authority to operate the equipment.
Declared maximum operating temperature: 50°C.
Radio Modules
The device contain approved radio module(s). These module(s) are identified below.
Motorola radio module supporting WLAN radio 802.11 a/b/g/n and Bluetooth.
Type(s): 21-148603-0B
Bluetooth
®
Wireless Technology
This is an approved Bluetooth
®
product. For more information or to view End
Product Listing, please visit https://www.bluetooth.org/tpg/listings,cfm
Wireless Device Country Approvals
Regulatory markings, subject to certification, are applied to the device signifying the
radio(s) is/are approved for use in the following countries: United States, Canada,
Japan, China, S. Korea, Australia, and Europe.
Please refer to the Motorola Declaration of Conformity (DoC) for details of other
country markings. This is available at www.motorola.com/doc.
Note: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland
and the United Kingdom.
Operation of the device without regulatory approval is illegal.
Country Roaming
This device incorporates the International Roaming feature (IEEE802.11d) which will
ensure the product operates on the correct channels for the particular country of use.
Ad-Hoc Operation (5 GHz Band)
Ad-Hoc operation is limited to Channels 36 - 48 (5150 - 5250 MHz). Use of this band
is restricted to Indoor Use Only, any other use will make the operation of this device
illegal.
Frequency of Operation – FCC and IC
5 GHz Only
The use in the UNII (Unlicensed National Information Infrastructure) band 1 5150 -
5250 MHz band is restricted to Indoor Use Only; any other use will make the
operation of this device illegal.
Industry Canada Statement
Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce
potential for harmful interference to co-Channel mobile satellite systems. High power
radars are allocated as primary users (meaning they have priority) of 5250-5350
MHz and 5650-5850 MHz and these radars could cause interference and/or damage
to LE-LAN devices.
Avertissement: Le dispositive fonctionnant dans la bande 5150-5250 MHz est
réservé uniquement pour une utilisation à l'intérieur afin de réduire les risques de
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes
canaux.
Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux
(c.-à-d., qu'ils ont la priorité) pour les bands 5250-5350 MHz et 5650-5850 MHz et
que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs
LAN-EL.
2.4 GHz Only
The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The
range of channels is limited by firmware.
Health and Safety Recommendations
Ergonomic Recommendations
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Safety on the Road
Do not take notes or use the device while driving. Jotting down a “to do” list or
flipping through your address book takes attention away from your primary
responsibility, driving safely.
When driving a car, driving is your first responsibility - Give full attention to driving.
Check the laws and regulations on the use of wireless devices in the areas where
you drive. Always obey them.
When using a wireless device behind the wheel of a car, practice good common
sense and remember the following tips:
1. Get to know your wireless device and any features such as speed dial and redial.
If available, these features help you to place your call without taking your
attention off the road.
2. When available, use a hands free device.
3. Let the person you are speaking with know you are driving; if necessary, suspend
the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice,
and even heavy traffic can be hazardous.
4. Dial sensibly and assess the traffic; if possible, place calls when you are not
moving or before pulling into traffic. Try to plan calls when your car will be
stationary. If you need to make a call while moving, dial only a few numbers,
check the road and your mirrors, then continue.
5. Do not engage in stressful or emotional conversations that may be distracting.
Make people you are talking with aware you are driving and suspend
conversations that have the potential to divert your attention from the road.
6. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in
the US, and 1-1-2 in Europe) or other local emergency number in the case of fire,
traffic accident or medical emergencies. Remember, it is a free call on your
wireless phone! The call can be made regardless of any security codes and
depending on a network, with or without a SIM card inserted.
7. Use your wireless phone to help others in emergencies. If you see an auto
accident, crime in progress or other serious emergency where lives are in danger,
call the Emergency Services, (9-1-1 in the US, and 1-1-2 in Europe) or other local
emergency number, as you would want others to do for you.
8. Call roadside assistance or a special non-emergency wireless assistance number
when necessary. If you see a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no one appears injured, or a
vehicle you know to be stolen, call roadside assistance or other special non-
emergency wireless number.
“The wireless industry reminds you to use your device / phone safely when driving”.
Warnings for Use of Wireless Devices
Please observe all warning notices with regard to the usage of wireless
devices.
Potentially Hazardous Atmospheres – Vehicles Use
You are reminded of the need to observe restrictions on the use of radio devices in
fuel depots, chemical plants etc. and areas where the air contains chemicals or
particles (such as grain, dust, or metal powders) and any other area where you
would normally be advised to turn off your vehicle engine.
Safety in Aircraft
Switch off your wireless device whenever you are instructed to do so by airport or
airline staff. If your device offers a ‘flight mode’ or similar feature, consult airline staff
as to its use in flight.
Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect medical electrical
equipment.
Wireless devices should be switched off wherever you are requested to do so in
hospitals, clinics or healthcare facilities. These requests are designed to prevent
possible interference with sensitive medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a minimum of 15 cm (6 inches) be
maintained between a handheld wireless device and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are consistent with
independent research and recommendations by Wireless Technology Research.
Persons with Pacemakers:
• Should ALWAYS keep the device more than 15 cm (6 inches) from their
pacemaker when turned ON.
• Should not carry the device in a breast pocket.
• Should use the ear furthest from the pacemaker to minimise the potential for
interference.
• If you have any reason to suspect that interference is taking place, turn OFF your
device.
Other Medical Devices
Please consult your physician or the manufacturer of the medical device, to
determine if the operation of your wireless product may interfere with the medical
device.
RF Exposure Guidelines
Safety Information
Reducing RF Exposure – Use Properly
Only operate the device in accordance with the instructions supplied.
International
The device complies with internationally recognized standards covering human
exposure to electromagnetic fields from radio devices. For information on
“International” human exposure to electromagnetic fields refer to the Motorola
Declaration of Conformity (DoC) at http://www.motorola.com/doc.
For further information on the safety of RF energy from wireless devices - see http://
responsibility.motorolasolutions.com/index.php/ourapproach/wirelesscommhealth/
Europe
Handheld Devices
This device was tested for typical body-worn operation. Use only Motorola tested
and approved belt-clips, holsters, and similar accessories to ensure EU Compliance.
US and Canada
Co-located statement
To comply with FCC RF exposure compliance requirement, the antenna used for this
transmitter must not be co-located or operating in conjunction with any other
transmitter/antenna except those already approved in this filling.
Handheld Devices
This device was tested for typical body-worn operation. Use only Motorola tested
and approved belt-clips, holsters, and similar accessories to ensure FCC
Compliance. The use of third-party belt-clips, holsters, and similar accessories may
not comply with FCC RF exposure compliance requirements, and should be
avoided.
Laser Devices
Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007, EN60825-1: 2007 and IEC60825-1 (Ed.
2.0)
The laser classification is marked on one of the labels on the device.
Class 1 Laser devices are not considered to be hazardous when used for their
intended purpose.
Class 2 laser scanners use a low power, visible light diode. As with any very bright
light source, such as the sun, the user should avoid staring directly into the light
beam. Momentary exposure to a Class 2 laser is not known to be harmful.
Caution: Use of controls, adjustments or performance of procedures other than
those specified herein may result in hazardous laser light exposure.
LED Devices
Complies with IEC/EN60825-1:2001 & IEC/EN62471:2006.
Scanner Labeling
Labels Read:
1. CAUTION - CLASS 3R LASER LIGHT WHEN OPEN. AVOID DIRECT EYE
EXPOSURE.
2. CAUTION - CLASS 2 LED LIGHT WHEN OPEN. DO NOT STARE INTO THE
BEAM.
3. COMPLIES WITH 21CFR1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS
PURSUANT TO LASER NOTICE No. 50, DATED JUNE 24, 2007 AND IEC/
EN60825-1:2001, 2007 & IEC/EN62471:2006.
4. LASER LIGHT - DO NOT STARE INTO BEAM. CLASS 2 LASER/LED
PRODUCT.
Power Supply
Use ONLY a Motorola approved UL LISTED ITE (IEC/EN 60950-1, LPS/SELV)
power supply with electrical ratings: Output 12 VDC, min 3.33 A, with a maximum
ambient temperature of at least 50 °C. Use of alternative Power Supply will
invalidate any approvals given to this unit and may be dangerous.
Batteries
Taiwan - Recycling
EPA (Environmental Protection Administration)
requires dry battery producing or importing firms in
accordance with Article 15 of the Waste Disposal
Act are required to indicate the recycling marks on
the batteries used in sales, giveaway or
promotion. Contact a qualified Taiwanese recycler
for proper battery disposal.
Battery Information
Use only Motorola approved batteries. Accessories which have battery charging
capability are approved for use with the following battery models: Symbol 21-65587-
03 (7.4 Vdc, 2200 mAh).
Motorola/Symbol Technologies rechargeable battery packs are designed and
constructed to the highest standards within the industry.
However, there are limitations to how long a battery can operate or be stored before
needing replacement. Many factors affect the actual life cycle of a battery pack, such
as heat, cold, harsh environmental conditions and severe drops.
When batteries are stored over six (6) months, some irreversible deterioration in
overall battery quality may occur. Store batteries at half of full charge in a dry, cool
place, removed from the equipment to prevent loss of capacity, rusting of metallic
parts and electrolyte leakage. When storing batteries for one year or longer, the
charge level should be verified at least once a year and charged to half of full
charge.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Motorola/Symbol Technologies batteries is one year,
regardless if the battery was purchased separately or included as part of the mobile
computer or bar code scanner. For more information on Motorola/Symbol
Technologies batteries, please visit: http:/mysymbolcare.symbol.com/battery/
batbasics1.html
Battery Safety Guidelines
• The area in which the units are charged should be clear of debris and
combustible materials or chemicals. Particular care should be taken where the
device is charged in a non commercial environment.
• Follow battery usage, storage, and charging guidelines found in the user's guide.
• Improper battery use may result in a fire, explosion, or other hazard.
• To charge the mobile device battery, the battery and charger temperatures must
be between +32 ºF and +104 ºF (0 ºC and +40 ºC)
• Do not use incompatible batteries and chargers. Use of an incompatible battery
or charger may present a risk of fire, explosion, leakage, or other hazard. If you
have any questions about the compatibility of a battery or a charger, contact
Motorola Enterprise Mobility support.
• For devices that utilize a USB port as a charging source, the device shall only be
connected to products that bear the USB-IF logo or have completed the USB-IF
compliance program.
• Do not disassemble or open, crush, bend or deform, puncture, or shred.
• Severe impact from dropping any battery-operated device on a hard surface
could cause the battery to overheat.
CAUTION Only use Motorola approved and UL Listed accessories, battery
packs and battery chargers.
Do NOT attempt to charge damp/wet mobile computers or
batteries. All components must be dry before connecting to an
external power source.
CAUTION In order to avoid or minimize the potential risk of ergonomic injury
follow the recommendations below. Consult with your local Health
& Safety Manager to ensure that you are adhering to your
company's safety programs to prevent employee injury.
1
2
3
4