AP-0622 Access Point INSTALLATION GUIDE
AP-0622 Access Point MOTOROLA SOLUTIONS and the Stylized M Logo are registered in the US Patent & Trademark Office. © Motorola Solutions, Inc. 2011. All rights reserved.
Installation Guide 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1 Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.2 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.3 Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.4 AP-0622 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AP-0622 Access Point 1 Introduction The AP-0622 access point, a component of the Motorola Solutions wireless controller system, links wireless 802.11a/b/g/n devices to the controller, enabling the growth of your wireless network with a cost effective alternative to standard access points. The AP-0622 access point provides multiple deployment options. The AP-0622 access point receives all power and transfers data through the same CAT-5 or better Ethernet cable. An 802.
Installation Guide 1.2 Warnings • • • • • Read all installation instructions and site survey reports, and verify correct equipment installation before connecting the AP-0622 model access point. Remove jewelry and watches before installing this equipment. Verify the unit is grounded before connecting it to the power source. Verify any device connected to this unit is properly wired and grounded.
AP-0622 Access Point 1.4.3 Features • • • • • 2 RJ-45 connectors, one for 10/100/1000 Ethernet and the other for the serial/console connector LED indicators Slots for wall mounting Clips for mounting on a suspended ceiling T-bar (internal antenna model only) with separately orderable accessories Lock port for Kensington style Security Lock The AP-0622 access point has one RJ-45 connector supporting an 10/100/1000 Ethernet port and accepts 802.3af-compliant power from an external source.
Installation Guide 2 7 Hardware Installation 2.1 Installation Instructions The AP-0622 access point mounts either on a wall (with customer supplied M4 x 25 pan head screws and wall anchor - or equivalent) or on a suspended ceiling T-bar. If deploying an external antenna model AP622, access point mounting kit (Part No. KT-135628-01) is required. An AP-0622 is not designed for mounting on a desk. To prepare for the installation: 1.
AP-0622 Access Point 2.3 Access Point Placement For optimal performance, install the access point away from transformers, heavy-duty motors, fluorescent lights, microwave ovens, refrigerators and other industrial equipment. Signal loss can occur when metal, concrete, walls or floors block transmission. Install the access point in an open area or add access points as needed to improve coverage. Antenna coverage is analogous to lighting. Users might find an area lit from far away to be not bright enough.
Installation Guide 9 2.4.2 Wall Mount Procedure 1. Orient the case on the wall by its width or length. ! CAUTION To ensure proper operation of an AP-0622 access point, ensure it is mounted in the correct orientation as shown above.
AP-0622 Access Point 2. Mark two points (for drill holes) 4.08 inches (103 .7 mm) apart on a horizontal line. 3. At each point, drill a hole in the wall, insert an anchor, screw into the anchor the wall mounting screw and stop when there is 1mm between the screw head and the wall . NOTE When pre-drilling a hole the recommended hole size is 2.8mm (0.11in.). 4. If required, install and attach a Kennsington security cable (customer supplied) to the unit’s lock port. 5.
Installation Guide 11 2.5 Integrated Antenna Model Suspended Ceiling T-Bar Mount Ceiling mount requires holding the AP-0622 access point up against a T-bar of a suspended ceiling grid and twisting the case onto the T-bar. 2.5.1 Suspended Ceiling T-Bar Mount Procedure 1. If required, install and attach a Kensington security cable (customer supplied) to the unit’s lock port. 2. Attach an Ethernet cable from the access point to a controller with an 802.
AP-0622 Access Point 2.6 External Antenna Model Wall Mount Instructions A wall mount deployment requires hanging the AP-0622 access point along its width or length using the pair of slots on the bottom of the unit. The AP-0622 can be mounted on to any plaster, wood or cement wall surface using the provided wall anchors. 2.6.1 Wall Mount Hardware • • • Two customer provided wide-shoulder Phillips pan head self-tapping screws (M3.5 x 0.
Installation Guide 13 1. Attach the two provided mounting ears (using four ear mounting screws) to the two narrow ens of the AP-0622. Align the ears using the built in ear alignment pin on the access point housing. Torque the screws to 6 lb-in. 1-0 DIO RA A OL OT OR le M nso Co oE 1/P GE DC 12V 2-1 DIO RA 2. Place the access point against the wall, ensuring the access point’s Motorola Solutions “bat wings” logo is in the correct orientation. 3.
AP-0622 Access Point 10. Verify the access point is receiving power by observing that the LEDs are lit or flashing. CAUTION ! If not using a 802.3af capable controller to power the AP622, ensure only the AP622’s designated power supply (PWRS-14000-148R) is used to supply power to the access point. Using an incorrectly rated power supply could damage the unit and void the product warranty. Do not actually connect to the power source until the cabling portion of the installation is complete. 2.6.
Installation Guide 15 2.7 External Antenna Model Suspended Ceiling T-Bar Mount Ceiling mount requires holding the AP-0622 access point up against a T-bar of a suspended ceiling grid and twisting the case onto the T-bar. If deploying an external antenna model AP-0622 on a ceiling T-Bar, access point mounting kit (Part No. KT-135628-01) or ceiling mount hardware (SCT-2) is required. 2.7.
AP-0622 Access Point 1-0 DIO A OL TO R A OL TO R MO le nso Co G 2-1 DIO RA le nso Co oE E1/P DC 1-0 DIO RA MO RA oE E1/P G 12V DC 12V 2-1 DIO RA 5. Attach an Ethernet cable from the access point to a controller with an 802.3af compatible power source or use the PWRS-14000-148R power supply to supply power to the AP-0622 (once fully cabled). 6. Attach appropriate antennas to the connectors. 7. Attach an Ethernet cable from the access point to the controller with an 802.
Installation Guide 17 2.8 External Antenna Suspended Ceiling Tile (Plenum) Mount Ceiling mount requires placing the AP-0622 access point above suspended ceiling tile. NOTE Notes or warnings about suspended ceiling mounts apply to all installations where the unit is placed on suspended ceiling tile. CAUTION ! Motorola Solutions does not recommend mounting the AP-0622 access point directly to any suspended ceiling tile with a thickness less than 12.7mm (0.5in.
AP-0622 Access Point 2.9 AP-0622 External Antenna Model Antenna Options Motorola Solutions supports two antenna suites for AP-0622 External Antenna models. One antenna suite supporting the 2.4 GHz band and another antenna suite supporting the 5 GHz band. Select an antenna model best suited to the intended operational environment of your access point.
Installation Guide 19 The 2.
AP-0622 Access Point 2.10 LED Indicators Both Integrated Antenna and External Antenna models have LED activity indicators on the front of the case. With the External Antenna models mounted above a ceiling, LEDs are at the center of an oval badge on the ceiling. The LEDs provide a status display indicating error conditions, transmission, and network activity for the 5 GHz 802.11a/n (amber) radio or the 2.4 GHz 802.11b/g/n (green) radio.
Installation Guide 21 Task 5 GHz Activity LED (Amber) 2.
3 AP-0622 Access Point Initial Access Point Configuration The AP-0622 access point receives its configuration once adopted by a Motorola Solutions RFS4000, RFS6000, RFS7000 or NX9000 series controller. There are no required initial configuration settings beyond verifying power and LED functionality for an AP-0622 model access point.
Installation Guide 4 23 Specifications 4.1 AP-0622 Integrated Antenna Model Electrical Characteristics An AP-0622 Integrated model Access Point has the following electrical characteristics: Operating Current & Voltage 12VDC, 1A (accessory power connector) 48V,0.25A (PoE connector) 4.2 AP-0622 Integrated Antenna Model Physical Characteristics An AP-0622 Integrated Antenna model Access Point has the following physical characteristics: Dimensions 9.38 inches x 7.5 inches x 1.38 inches 23.82 cm x 19.
AP-0622 Access Point 4.3 AP-0622 External Antenna Model Electrical Characteristics An AP-0622 External Antenna model Access Point has the following electrical characteristics: Operating Current & Voltage 12VDC, 1A (accessory power connector) 48V,0.25A (PoE connector) 4.4 AP-0622 External Antenna Model Physical Characteristics An AP-0622 External Antenna model Access Point has the following physical characteristics: Dimensions 7.88 inches x 5.00 inches x 1.00 inches 20.01 cm x 12.70 cm x 2.
Installation Guide 25 4.5 Radio Characteristics The AP-0622 model Access Points have the following radio characteristics: Operating Channels All channels from 4920 MHz to 5825 MHz except channel 52 -64 Channels 1-13 (2412-2472 MHz) Channel 14 (2484 MHz) Japan only Actual operating frequencies depend on regulatory approval for the country of use. Data Rates Supported 802.11b: 1,2,5.5,11Mbps 802.11g: 1,2,5.5,11,6,9,12,18,24,36,48, and 54Mbps 802.11a: 6,9,12,18,24,36,48, and 54Mbps 802.
5 AP-0622 Access Point Regulatory Information This device is approved under the Symbol Technologies, Inc. brand: Symbol Technologies, Inc. is a wholly owned subsidiary of Motorola Solutions, Inc. (collectively "Motorola"). This guide applies to Model Number AP-0622. All Motorola/Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website: http://supportcentral.
Installation Guide 27 Industry Canada Statement: Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-Channel mobile satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices.
AP-0622 Access Point International The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on “International” human exposure to electromagnetic fields refer to the Motorola/Symbol Declaration of Conformity (DoC) at: http://www.motorola.
Installation Guide 29 Radio Frequency Interference Requirements—FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
AP-0622 Access Point CE Marking and European Economic Area (EEA) The use of 2.4GHz RLAN’s, for use through the EEA, have the following restrictions: • • • Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835 GHz. France outside usage, the equipment is restricted to 2.400-2.45 GHz frequency range. Italy requires a user license for outside usage.
Installation Guide 31 Taiwan 5.25-5.35 ⿁䌿丏ᐊܻ᪡П⛵㎮䊛㿞ڇ䔌䀁ˈ٭䰤ᮐᅸܻՓ⫼ Korea 당해 무선설비는 운용 중 전파혼신 가능성이 있음 당해 무선설비 는전파혼 신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다 Turkish WEEE Statement of Compliance EEE Yönetmeli÷ine Uygundur .
AP-0622 Access Point Waste Electrical and Electronic Equipment (WEEE) English: For EU Customers: All products at the end of their life must be returned to Motorola for recycling. For information on how to return product, please go to: http://www.motorola.com/recycling/weee. Français: Clients de l'Union Européenne: Tous les produits en fin de cycle de vie doivent être retournés à Motorola pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.motorola.
Installation Guide Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Motorola för återvinning. Information om hur du returnerar produkten finns på http://www.motorola.com/recycling/weee. Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Motorola-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa http://www.motorola.com/recycling/weee.
AP-0622 Access Point Part Numbers, Support, and Sales Part Number Description AP-0622-66030-US 802.11n dependent access point, dual radio, internal antenna AP-0622-66040-US 802.11n dependent access point, dual radio, external antenna AP-0622-66030-WR 802.11n dependent access point, dual radio, internal antenna AP-0622-66040-WR 802.
Installation Guide 6 35 Motorola Solutions, Inc. End-User License Agreement BY DOWNLOADING, INSTALLING, OR USING THE SOFTWARE DESCRIBED IN THIS DOCUMENT, YOU OR THE ENTITY OR COMPANY THAT YOU REPRESENT ("LICENSEE") ARE UNCONDITIONALLY CONSENTING TO BE BOUND BY AND ARE BECOMING A PARTY TO THIS LICENSE AGREEMENT ("AGREEMENT"). LICENSEE'S USE OR CONTINUED USE OF THE DOWNLOADED OR INSTALLED MATERIALS SHALL ALSO CONSTITUTE ASSENT TO THE TERMS OF THIS AGREEMENT.
AP-0622 Access Point shall return all copies of the Software to Licensor, or destroy and remove from all computers, hard drives, networks, and other storage media all copies of the Software, and shall so certify to Licensor that such actions have occurred. Sections 2-13 shall survive termination of this Agreement. 6 DISCLAIMER OF WARRANTIES.
Installation Guide 37 Agreement shall be held by a court or other tribunal of competent jurisdiction to be illegal, invalid or unenforceable, such provisions shall be limited or eliminated to the minimum extent necessary so that this Agreement shall otherwise remain in full force and effect.
7 AP-0622 Access Point AP-0622 Access Point China ROHS Compliance 15 有毒有害物质或元素 部件名称 (Parts) 金属部件 (Metal Parts) 电路模块 (Circuit Modules) 电缆及电缆组件 (Cables and Cable Assemblies) 塑料和聚合物部件 (Plastic and Polymeric Parts) 光学和光学组件 (Optics and Optical Components) 电池 (Batteries) 六价铬 (Cr6+) 多溴二苯 醚 (PBDE) O 铅 (Pb) 汞 (Hg) 镉 (Cd) O O O O 多溴联 苯 (PBB) O X O O O O O X O O O O O O O O O O O O O O O O O O O O O O O O:表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以 下。 X:表示该有毒有害
Installation Guide Operation in the Canada This radio transmitter (IC: 109AN-AP0622) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
AP-0622 Access Point Motorola Solutions, Inc. 1301 E. Algonquin Rd. Schaumburg, IL 60196-1078, U.S.A. http://www.motorolasolutions.com MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2011 Motorola Solutions, Inc. All Rights Reserved.