WA9905/WA9906 -RFID MODULES HF-KR3-2S/LF-ID1 INSTALLATION SHEET Important: All Approval and safety information is outlined in the ‘WORKABOUTPRO4 Regulatory & Warranty Guide – part number 8000296 provided with each WORKABOUTPRO4. Warning: The WORKABOUTPRO4 with the RFID option must not be held closer than 20 cm from the rest of the body. This product must not be used in a holster or on a belt-clip. © 2014 Motorola Solutions, Inc. All Rights Reserved. February 12, 2014 80073681.
1. Product Description Easily installable expansion modules for the WORKABOUT PRO 4 allow you to customise this hand-held to meet your specific mobile computing requirements. This chapter outlines how to install the RFID Module HF/LF. The RFID MODULE HF-KR3-2S (WA9905) or RFID MODULE LF-ID1 (WA9906) kits are composed of 7 parts: A. B. C. D. E. F. G.
2. Product Installation Before installing a module in the WORKABOUT PRO 4, all power sources must be turned off. • Remove the batteries. If your unit is using AC power, disconnect it. With the power shut down, you can install the RFID Module HF/LF. • Connect the USB cable on the RFID Module. • Slide the RFID Module in the PCB guide. © 2014 Motorola Solutions, Inc. All Rights Reserved. February 12, 2014 80073681.
Make sure you slide HF PCB only in the bottom slot of the PCB guide • LF PCB Adding SAM cards (optional): • Insert one or two SAM cards in their sockets: Unlock 1 or 2 SAM sockets Put 1 or 2 SAM cards and lock them • Slide the PCB guide in the Multi purpose End Cap. • Slide and Screw the stopper into the Multi purpose EndCap. © 2014 Motorola Solutions, Inc. All Rights Reserved. February 12, 2014 80073681.
• • Remove existing End cap at the top of the WORKABOUT PRO 4. Connect the USB cable to USB connector.
MODEL: 7528XPHF CONTAINS APPROVED RADIO MODULES MODELS: 21-148603-0B &7528P CONTAINS FCC ID: UZ7211486030B & UZ77528PA & UZ77528HFA CONTAINS IC: 109AN-211486030B & 109AN-7528PA & 109AN-7528HFA For detailed instructions, pleased refer to the WORKABOUT PRO 4 Hand-Held Computer User Guide. © 2014 Motorola Solutions, Inc. All Rights Reserved. February 12, 2014 80073681.
3. Software installation: • Copy and install the two latest CAB file named ““WAP 4 HF.CAB” or “LF Tools.CAB” and “RFID Driver_WAP 4_WM65_HF_KRX_2S.CAB” or “RFID Driver_WAP 4_WM65_LF_ID1.CAB” © 2014 Motorola Solutions, Inc. All Rights Reserved. February 12, 2014 80073681.A MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..
• After installation, select “HF Demo” or LF Demo” in Program File folder, the connection panel opens: Select TAG type • To read the ID of a TAG, press the Read ID Button or Scan Button. Put the TAG in front of the antenna. © 2014 Motorola Solutions, Inc. All Rights Reserved. February 12, 2014 80073681.A MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license.
4. Reading area: This area depends on the TAG type, TAG packaging, Tag position and environment (metallic or not). Reading Area Tag RFID MODULE HF-KR3-2S/LF-ID1 RFID Regulatory information © 2014 Motorola Solutions, Inc. All Rights Reserved. February 12, 2014 80073681.A MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..
IMPORTANT NOTE FOR NORTH AMERICA: The RFID must not be used whilst the host WORKABOUTPRO4 is being powered by the ac/dc adaptor. FCC Information to Users: Radiation Exposure Compliance This product complies with the FCC RF exposure limits for an uncontrolled environment. For continued compliance, the product must not be held closer than 20 cm from the rest of the body. This product must not be used in a holster or on a belt-clip. Federal Communication Commission Interference Statement.
CE Marking: Please CE marking and details of other country markings refer to the Declaration of Conformity (Doc) at http://www.motorolasolutions.com/doc . COMPANY HEADQUARTERS Motorola Solutions, Inc. 1301 E. Algonquin Rd Schaumburg, IL 60196-1078, U.S.A. http://www.motorolasolutions.com SUPPORT SERVICES Contact the Motorola Solutions Global Customer Support at: http://www.motorolasolutions.com/support.
