Z-2242 / Z-2240 QUICK START & REGULATORY GUIDE
Product Features:
Accessory Option :
Item Description System Processor Qualcomm MSM8960 Dual Core 1.5GHz Android OS Android Jeally Bean 4.2.2 Memory 1GB LPDDR2 SDRAM Storage Internal 8GB eMMC Flash (To be continued) Display, Camera and Scaning Size: 4.
Sensible Code, QR Code, Micro QR Code, Maxi Code, PDF 417, Micro PDF417, GS1 DataBar Composite, UPC/EAN Composite. Front Camera No Sensor OmniVision MT9E013 Resolution: 8MP (3264H*2448V) Angle of view: 74.
(1) AC adaptor charging (via micro USB) Charging method Wireless charger (Optional) RTC (2) docking station charging (no sleeve charging) (3) battery cartridge Qi (WPC V1.
Ingress Protection IP65 Drop 1.5M on poly wood, 6 drops ESD Air: ±8KV Contact: ±4KV Operating 0°C~ 45°C battery in charging mode Temperature (include -20°C+60°C battery in discharging mode LCM and battery) Storage Temperature -20~+60°C Accessories (in package) Adaptor Jack 1pcs, 5.
Micro SD / Micro SIM Card Installation Open Micro SD/Micro SIM door, insert the Micro SD into slot. Insert Micro SIM into SIM slot. (Note: SIM 1 is set as default network connection; SIM switch: Go to “Settings” in Android system “SIM SWITCH” “Choose SIM” “SIM 2”) Close the door after installation.
Started Z-2242 / Z-2240 Power On Z-2242 / Z-2240 Press and release the power button LED blinks in red indicating low and risk battery and stating red indicating that the battery is charging. The LED becomes green when battery is fully charged, then. Note: Device turns to the modes as below by pressing power button key. Suspend Mode Press and release the power button to place the Z-2242 / Z-2240 in suspend mode.
Data Capture Scan a Bar Code with Imager 1.
- Go to “BarcodeScan” Type: To choose Barcode type Barcode Scan - Select “ Beep”: To have beep sound after scan Select” Vibrate”: Need device vibration after scan Select” Automatic Carriage Return” Require to send enter key automatically after scan
2. Launch a bar code reading application or use Data Wedge. 3. Point the exit window at the bar code 4.
Select Remap Key Choose “Barcode Scan”
Select “P2” Remap Key choose “Barcode Scan” Scan Key(P1) (P2) 5. The red laser aiming pattern turns on to assist in aiming, scan ready when beep sounds. 6. Release the scan button. Scan a Bar Code with Camera Using the rear camera to scan bar code. 1. Launch a bar code reading application or use Data Wedge. 2. Point the back of the Z-2242 / Z-2240 at the bar code. 3. Press the scan button Photo & Videos Using the rear camera to take photos and capture video.
GPS Information Acquiring satellite signals may take a few minutes. Without a clear view, acquisition takes longer and possible unable to catch the position quickly. Turn off GPS application if no use. Near Field Communication (NFC) Feature Allow Data exchange in short-range (less than 4cm) when the phone touches another device. The NFC areas, being of both a phone and other NFC compatible device (ex: tags, reader, phones and so on.), should be close to one another for communication.
Enable Android Beam Slide to “ON”
Regulatory Information Caution: Only use ZEBEX approved accessories. Wireless Device Country Approval Regulatory markings, subject to certification, are applied to the device signifying the radio(s) are approved for use in the European countries under CE coverage. For 2.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Warnings of Use Wireless Devices Please observe warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres – Vehicles Use You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles ( such as grain, dust, or metal powders ) and any other area where you would normally be advised to turn off your vehicle engine.
Use only a ZEBEX approved batteries. When batteries are stores over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half of full charge.
Marking and European Economic Area (EEA) Frequency of Operation The use of 2.4 GHz RLAN's, for use through the EEA, have the following restrictions: Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 - 2.4835 GHz France, outside usage is restricted to 2.4 - 2.454 GHz. ® Italy requires a user license for outside usage. Bluetooth Wireless Technology for use through the EEA has the following restrictions: Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 -2.