F3101/3106
Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies.
Europe – EU Declaration of Conformity Česky [Czech] [Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Lietuvių [Lithuanian] Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Product Overview Introduction Basic Connection Application Easy Access Web Browsers Mobile Phone Viewing Windows Live Messenger Hardware Installation Live View Safety Instruction Minimum System Requirement Package Contents Physical Description Mounting and Cable Connecting Live View Control Panel Setting Client Setting Image Setup EZvuu Live View Client Setting Camera Console Remote Playback Remote Record OSD Toolbar Setting System Camera Network Events Help Appendix Frame Rate and
Product Overview Introduction Basic Connection Wired Connection Wireless Connection Application Table of Contents Product Overview Hardware Installation EZvuu Easy Access Live View Setting Appendix 6
Introduction The F3101/3106 is an ultra-compact H.264 Megapixel IP Camera equipped with a high sensitivity progressive scan CMOS sensor, achieving high image quality and superior low-light performance. F3106 also supports 802.11b/g/n wireless connection with WPS and local storage with SD/SDHC supported. Key Features: •Maximum Resolution 1280x1024 (1.3MP) •DDNS Supported •Simultaneous H.264, MPEG-4 and Motion JPEG video stream •up to 15 fps in 1280x1024 •IEEE 802.
Basic Connection Wired Connection Wireless Connection (Only IP1050) 1. Connect the power adaptor to IP Camera. 2. Connect IP Camera’ Ethernet port to your Hub/ Switch / Router 1. Connect the power adaptor to IP Camera. 2.
Application Table of Contents Product Overview Hardware Installation EZvuu Easy Access Live View Setting Appendix 9
Hardware Installation Safety Instruction Minimum System Requirement Package Contents Physical Description Front View Bottom View Mounting and Cable Connecting Table of Contents Product Overview Hardware Installation EZvuu Easy Access Live View Setting Appendix 10
Safety Instruction Before you use this product In case of a breakdown This product has been designed with safety in mind. However, the electrical products can cause fires which may lead to serious body injury if not used properly. To avoid such accidents, be sure to heed the following. In case of system breakdown, discontinue use and contact your authorized dealer. In case of abnormal operation Video and audio surveillance can be forbidden by laws that vary from country to country.
Minimum System Requirement Table of Contents Item CPU Graphic Card RAM Operating System Web Browser Requirements Core Duo 2.8GHz (or equivalent AMD) 256 MB RAM graphic cards(or equivalent on-board graphic cards) 1G Windows2000, 2003, XP, Vista, Windows 7, Mac OS X Leopard Internet Explore 6 or later Product Overview Hardware Installation EZvuu Easy Access Note 1. If you are using Windows 98 or Windows ME, please install IP Installer before using WEB UI to ensure the system runs normally. 2.
Package Contents Camera – F3101/3106 Network Camera Quick Installation Guide - To provide brief product information and quick installation and wireless setting. Software CD – Free bundled web-based 9 channels IP Surveillance Software, EZvuu wizard, User Manual and Quick Installation Guide. Ethernet cable – Assist to setup your IP Camera.
Physical Description Front View Focus Adjustment Ring - Adjust focus manually to achieve the best image quality. Power LED indicator - Power LED will light up after the IP Camera completed the boot process. Network LED indicator - Network LED will light up after the IP Camera connected with network. Built-In Microphone - Built-In Microphone for Twoway Audio.
Physical Description Table of Contents POWER LED Steady Red Steady Blue Steady Blue → Flash Purple Boot up process Boot up complete Push WPS button and ready for connecting wireless router/AP Flash Purple → Steady Blue WPS configuration finished Flash Purple → Steady Red 30 Secs WPS configuration failed Steady Blue → Unlit Push reset button and then reset Steady Blue → Unlit → Steady Blue Push reset button for at least 5 secs and then reset to default Steady Blue → Flash Purple Firmware upgrade Steady Blue
Physical Description Bottom View DC 12V - For connection of 12V DC input. Reset – When the device is empowered, press the Reset Button to reboot the device, or hold the Reset Button for 10 seconds to set the device settings back to factory default. WPS – Click to easily connect to your router equipped with WPS.
Mounting and Cable Connecting Wall and Ceiling Mounting Power and Ethernet Connecting 1. Use the 3 supplied screws to fix the base plate to a flat surface. 2. Loosen the lock ring to adjust the desired angle of the camera. 3. Tighten the lock ring. 1. Use a standard RJ-45 network cable to connect the IP Camera to the Network connection 2. Connect power adaptor to the IP Camera.
EZvuu Live View Client Setting Camera Console Remote Playback Remote Record OSD Toolbar Table of Contents Product Overview Hardware Installation EZvuu Easy Access Live View Setting Appendix 18
Live View Table of Contents Product Overview Hardware Installation EZvuu Easy Access 1. Screen Division Allocate the sub-screen display by clicking on the desired layout icon. 1 channel; 4 channel; 6 channel; 9 channel Live View 2. Logout Click to logout EZvuu Setting 3. Camera Layout Assign cameras to camera layout by drag and drop. You can double click on a particular view to extend display to full screen. Double click on the screen again to regain previous camera layout.
Live View Table of Contents Product Overview Hardware Installation EZvuu Easy Access 4. Camera Group Click to see which cameras in this group. The following is the meaning of each icon: No owner cameras group. It will flash when there’s new no owner camera. Your cameras group Friends camera group Live View Setting 5. Add Camera Click to add no owner camera to your account.
Live View Table of Contents Product Overview Hardware Installation EZvuu Easy Access 6. Screen Position Display this camera in which sub-screen. Blue means live view, green means playback, orange means remote playback and red means record. Live View 7. Camera Status Click to display control panel.
Client Setting Table of Contents Product Overview 1. Online Users Hardware Installation Display online users of your account. The limitation is simultaneously 5 users online. 2. Account Name Display the name of your EZvuu account. 3. Account Setting EZvuu Right Click your account and it will display your account setting including: "Change Password", "E-mail Setting" and "Manage the friend list". Select to change the password of your EZvuu account.
Camera Console 1. Camera Name Display nick name of this camera. You can right click to change the nick name. 2. Camera Console Click to display camera console. Click to share this camera to your friends. Click to remove this camera from your camera list. Click into setting page of this camera. Click to display playback control including: Stop playing this channel Start recording to your local PC. The icon will display when the video is on recording.
Remote Playback 1. Remote Playback Click to display remote playback console. 2. Time Selector Using the date selector, it is possible to jump straight to recordings from a specific point in time. You can drag to the blue background of timeline browser to remote playback. You also can click and to scroll monthly. If there’s no any record in last month or next month, it would jump to the month with record. 3.
Remote Record 3. Record Schedule Display the scheduled recording time of each day. The black rectangle means what day today is of the camera. The blue timeline represents the recording time of today. 4. Periodical Recording Status Display periodical recording status. You can click this icon to setup periodical recording schedule. The following is the meaning of each icon: Periodical recording enabled; Periodical recording disabled Table of Contents Product Overview Hardware Installation EZvuu 5.
OSD Toolbar 2. Playback Controls 1. OSD Toolbar Display OSD toolbar when you move your mouse on the view screen. You can click and to pull up and down the events list. The events list will flash when there is a new event. In the events OSD, it will show the recording date & time and what event triggers. You can also click and to scroll the event list. Click , and to setup the 3 motion detection zones. In the motion detection setting mode, you can click to enable/disable motion detection zone.
Easy Access Web Browsers Windows Web Browsers Mac Safari Mobile Phone Viewing Using IP Camera Via iPhone 3G Mobile Phone Streaming 2.5G Mobile Phone WAP 2.
Web Browsers Windows Web Browsers 1. Start your web browser, and enter the IP address or host name of the IP camera in the Location / Address field of your browser. Note If you only want to view the video without setting page, enter “http:///index2.htm” as your web URL. Table of Contents 3. The monitor image will be displayed in your browser. In the far left side of main configuration are Setting, Client Setting, and Image Setup. Product Overview Hardware Installation EZvuu 2.
Web Browsers Mac Safari 1. Click the Safari icon, and enter the IP address of the IP camera in the Location / Address field of your browser. Note If you only want to view the video without setting page, enter “http:///index2.htm” as your web URL. Table of Contents 2. Use the default account “admin” and default password “admin”.
Web Browsers 3. The monitor image will be displayed in your browser. In the far left side of main configuration are Setting, Client Setting, and Image Setup.
Mobile Phone Viewing Using IP Camera Via iPhone 1. Select Safari function Table of Contents 3. Type name and password. Default value is admin / admin. Then click Login In Product Overview Hardware Installation EZvuu 2. Enter IP address in your web link. 4. Live view will show up in the middle of screen.
Mobile Phone Viewing 3G Mobile Phone Streaming 2.5G Mobile Phone Browser For 3G mobile phone viewing, type “ rtsp://:/video.3gp ” into your 3G Streaming Link. is the Public IP address of your IP camera; is the RTSP port of your IP camera (Default value is 554.) Example: rtsp://100.10.10.1:554/video.3gp For 2.5G mobile phone viewing, type “http:///mobile.wml ” into your 2.5G WAP Browser. is the Public IP address of your IP camera.
Windows Live Messenger 1. Apply for a new MSN account for your Device 4. You will get IP information automatically Table of Contents Product Overview 2. Type login account and password Hardware Installation 3. Set the following settings 5.
Windows Live Messenger 6. Click Action button and choose Start control panel 7.
Live View Live View Control Panel Setting Client Setting Image Setup Table of Contents Product Overview Hardware Installation EZvuu Easy Access Live View Setting Appendix 35
Live View Control Panel Full Screen Snapshot Table of Contents Product Overview Hardware Installation EZvuu Easy Access Live View Setting Video Play Audio In Audio Out Zoom In/Out Appendix 36
Setting Setting This function is only for the Administrator. Click this button to get into the setting page. HELP is an online help and support. It provide solutions immediately. Table of Contents Product Overview Hardware Installation EZvuu There are four sub-folders including System, Camera, Network, and Events and a Question mark inside. Click question mark will pop-up a new window and you can get answers online without user manual.
Client Setting Client Setting This function is only for the administrator and client. Mode Click the pull-down box to choose between H.264, MPEG-4 MJPEG, and JPEG video compression mode. MJPEG streaming is unavailable if RTSP mode is “On.” Video Size Table of Contents Product Overview Hardware Installation Select the desired display view size form 1X to 1/4X. EZvuu Video Buffer Turn the Video Buffer function ON / OFF.
Image Setup Brightness The higher value the brightness is, the brighter the image is. Contrast The contrast is a measure of a display system, defined as the ratio of white to black that the system is capable of producing. The higher value the contrast is, the more delicate of color you can have. Saturation The saturation of a color is determined by a combination of light intensity and how much it is distributed across the spectrum of different wavelengths.
Setting System Information Date/Time Account System Log Initialize Camera General Profile 1 Profile 2 Advanced Playback Network Information EZvuu PPPoE DDNS UPnP IP Notification Messenger WPS Wireless Events FTP Client SMTP Network Storage Memory Card Motion Detection Audio Detection Schedule Help Table of Contents Product Overview Hardware Installation EZvuu Easy Access Live View Setting Appendix 40
