Content Safety Instruction ............................................................................................................................................................ 2 Minimum System Requirement & Product Feature.................................................................................................... 4 Minimum System Requirement ....................................................................................................................................
User Manual Safety Instruction Before you use this product This product has been designed with safety in mind. However, the electrical products can cause fires which may lead to serious body injury if it is not used properly. To avoid such accidents, be sure to heed the following. Legal Caution Video and audio surveillance can be forbidden by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.
In case of a breakdown In case of system breakdown, discontinue use and contact your authorized dealer. In case of abnormal operation If the unit emits smoke or an unusual smell, If water or other foreign objects enter the cabinet. If you drop the unit or damage the cabinet:1 Disconnect the cable and the connecting cables. 2 Contact your authorized dealer or the store where you purchased the product.
Minimum System Requirement & Product Feature System Requirement For normal operation and viewing of the network camera, it’s recommended that your system meet these minimum requirements for proper operation: Item Requirements CPU Minimum Intel® Core 2 Duo or higher (Core i3 or above is recommended) Graphic Card 256 MB RAM graphic cards (or equivalent on-board graphic cards) RAM Minimum 1 GB of RAM,(2GB or above is recommended) Operating System Window 2000, 2003, XP, Vista or Windows 7 Web Browser
Product Features SYSTEM Resolutions H.264 / MPEG-4 / Motion JPEG: Screen Resolution Higher than 1024 * 720 pixels Compressing format H.
Main Page Toolbar of Main Page 6
Client Setting Profile View Size Protocol Video Buffer Click the drop-down menu to choose video compression mode of Live View among H.264, MPEG-4, MJPEG and H.264. Note: As long as the operating system is not able to afford loading under H.264 mode, please downgrade the mode to MPEG-4 or MJPEG. Select the desired view size of image resolution between Fit Screen and Full Screen. Select the transferring protocol among TCP, UDP, and HTTP. Turn the Video Buffer function On / Off.
PTZ Click the Home button and it brings you back to the center no matter what position you are at. Move the camera view to the direction that the various arrows you click on. Use the various direction arrows to steer the camera view to the required position,and name Preset it for the specified position.
Basic Setup Account Account List The device default account and password setting is “admin / admin”. That means everyone who knows IP address can access the device including all configuration. It is necessary to create a new password if the device is intended to be accessed by specific ones. Click “Add” to create the accounts to the specific users. There are 1 default account and 9 accounts that you may assign 3 different viewer modes as you wish.
Network TCP/IP Internet Protocol Version 4 (TCP/IPv4) Obtain an IP address automatically (DHCP): If a DHCP server is installed on the network, to select this while the IP address is assigned by the DHCP server. Obtain DNS server address automatically: Select this to obtain the address of DNS server automatically. Use the following IP address: Select this option when the fixed IP address is set. IP address: Enter the IP address of the device. Subnet mask: Enter the subnet mask.
Note: Reboot the IP Camera after the network setting has been made. Note: If you connect the IP Camera with your computer directly, the default network domain of camera is 192.168.1.xx PPPoE If your ISP provides Dynamic IP with authentication by username and password, type all PPPoE information in this part. When using the PPPoE function, you need to turn on the DDNS or IP Notification function at the same time. IP address: The IP address obtained at the PPPoE connecting with network.
Use the following DNS server address: Select this when you set the fixed address as the IP address of DNS server. Primary DNS server: Enter the IP address of the primary DNS server. Secondary DNS server: Enter the IP address of the secondary DNS server. Note : 1. PPPoE (Point-to-Point Protocol over Ethernet): PPPoE is a network protocol for encapsulating Point-to-Point Protocol frames insider Ethernet frames.
3. Then click “Refresh”. All access points (AP) around you will show up. 4. Select the AP you wish to connect and click “Connect”. 5. Enter password at passphrase if you need. If you don't know the setting of the wireless AP, please ask your network administrator. WPS ( for F3107/F3115 only) WPS (Wi-Fi Protected Setup) also known as a standard for easy and secure establishment of a wireless home network. Enable it when wireless is turned on, and you will see the wireless IP and MAC of this IP camera.
Configuration Method PBC – Select to start WPS configuration. PIN – Select and click Generate new PIN to generate a new PIN code and start WPS configuration. This list is the result of network scan that only provide wireless AP with WPS function. It will be shown where the network is currently linked. Date Time Current Date / Time It displays current time and date of IP Camera and PC that you connected, and you may select the Date/Time format as you wish in the drop-down menu.
Note: The NTP server (Network Time Protocol) is the time server which is an Internet standard protocol built on the top of TCP / IP. This assures accurate synchronization to the millisecond of computer clock times in a network of computers. Video Video Setting Image Image Rotated: Select the screen display “flip”, “mirror”, or “flip + mirror. Video clip format: Select RECORDING compression format H.264、MPEG-4、MJPEG、EZVuu HQ and EZVuu LQ . Profile1(H.264): H.
Overlay Text information can be showed on the display screen, such as Date / Time and the user-defined title. Privacy Mask Privacy Mask is an area of solid color that bans users from viewing part of monitored area. Click “Add” and a setting pop-up window comes out. A translucent rectangle is located at up left of the image, drag it to where you wish to cover and resize it. Enter a descriptive name, select the color and enable it then save. Profile There are five stream profiles available for quick set-up.
Day / Night ( for F3110 / F3115 only) IR cut filter mode: There are 4 modes for IR cut filter to switch Auto, Night Mode, Day Mode, Schedule to make IR cut filter work based on different conditions. IR cut filter switch delay: This is interval time (by seconds) when the IR cut filter switch has been implemented till it indeed works. IR cut filter threshold: Dark-This is the threshold for the IR cut filter image environment being bright turning to dark.
Audio Audio Channel Full duplex: Select it for simultaneous communication in both direction between the connected administrator and IP CAM. It means both parties can speak and be heard at the same time. Half duplex: Select it for communication in both directions, but only one direction at a time. It cannot receive signal until the transmission has been done. Therefore, once one party speaks but can’t hear the voice, and vice versa. Talk only: It narrows down to one way just for talking.
Audio Please refer to p.17~18 Camera Setting Image Setting Image Enhancement Brightness: The image brightness can be adjusted in the range 0-100, the a higher value produces a brighter image. Saturation: Adjust the saturation in the range 0-100, the higher value gets more colorful image. Contrast: Adjust the image's contrast by raising or lowering the value in the range 0-100. Sharpness: Controls the sharpness applied to the image in the range 0-100.
Low light behavior: This is the operation aims at low light and night mode. According to the surroundings you can manually set the preferable settings differ from the regular “Exposure Settings”. Nevertheless, the low light behavior can be scheduled up by working day, weekend, and night mode as user’s preference. Backlight Compensation: It makes the object clearer display when the image background is too bright or the object is too dark.
PTZ Control PTZ Setting You may set the speed of digital pan/tilt/zoom, and also speed for preset/patrol. The range goes 1-100(slow to fast). View Area Control Panel This can be set up the selected view area in every profile. Besides the viewing window there is a PTZ control panel to go to the direction you want. Note: Before operating this function, you must set the resolution beneath 1920x1080, and move your view area to your desired position.
Click it to upload the recorded file in the PC Click it to stop the current video Click it to pause the playing video Click it to slow down the playing speed Click it to speed up the playing speed It displays the current playing video length It displays the whole video length It displays the current video speed Click it to adjust the volume of video and mute Click it to make digital zoom Network Storage Network storage provides the storage function for saving image files to the specified computer and folde
Event Event Server Event Server Click “Add” to create a event server then the setting page pops up. Name it, select your network type put on the storage location. This is optional to create the password for certain group to use it. Then click the “Test” button to see if it works, it will show the information on the pop-up window to see your setting if has been made successfully. 3 types of event transmission offered to select.
Trigger You may activate the following trigger types as you wish depends on various conditions: Motion Detection: Click it on for using Motion Detection function as a sensor. You must configure motion detection function before taking this as the trigger. Set minimum time interval between 2 triggers, and choose the desired detection area. The detection type individually stands for the following meanings: Start: The trigger would be activated when the target object starts to move.
Action There are multiple choices for action taking which is optional for user to select all of them or part of them: Send Image、Send Notification、Activate Digital Output or Night Mode. Send Image: You may set up where the image sent to, options like event server and SD card. You must configure it first, please refer to Event Server. Send Notification: Firstly got to HTTP server configure the HTTP server URL, port, User ID, Password, and Proxy server settings.
Schedule The schedule is made for Event List to set the recording period. There are already 3 modes(Working Day、 Weekend and Night Mode) has been set for user, there are 7 more modes are available to set manually. System Maintenance Restart Restart button is for reboot the IP Camera digitally, you may reboot the camera manually or automatically. Click “on” and shows two modes for user to reboot the camera automatically.
IP Address Filter Once enabled it, the listed IP address are allowed or denied access to the product. Add the IP Address that you’d like to allow or deny and select allow or deny from the list and save it. HTTPS HTTPS is a URL scheme used to indicate a secure HTTP connection. It is syntactically identical to the http:// scheme normally used for accessing resources using HTTP.
RTSP Configuration Configure the RTSP by profile, then enable or disable the authentication. Multicast Status: This can be enabled or disabled the multicast. Access Name: This will be shown and changed along with the profile you select. Multicast Address: Specify the multicast server address. Video / Audio Port: Specify the transmission port number of the video data, from 1124 to 65534. Time to Live: Set the maximum TTL that multicast can pass through. The default value is 15.
DDNS DDNS is a system which allows the domain name data held in a name server to be updated in real time. The most common use for DDNS is allowing an internet domain name to be assigned to a computer with a varying / dynamic IP Address. This makes it possible for other sites on the internet to establish connection to the machine without needing to track the IP Address themselves. Server name: Choose the DDNS Server from the list.
FCC statement in User’s Manual (for class B) “Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.