GAS HOB ÃÀÇÎÂÀß ÂÀÐÎ×ÍÀß ÏÎÂÅÐÕÍÎÑÒÜ ZGL 646 ZXL 636 INSTRUCTION BOOKLET ÐÓÊÎÂÎÄÑÒÂÎ ÏÎ ÝÊÑÏËÓÀÒÀÖÈÈ RU
English Important Safety Information These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance. About Installation, Cleaning and Manteinance • • • • • • • • • It is mandatory that all operations required for the installation are carried out by a qualified or competent person, in accordance with existing rules and regulations. Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work.
Contents For the Installer For the User Important Safety Information 2 Technical Data 6 Instruction for the User 3 Instruction for the Installer 6 Cleaning and Maintenance 5 Electrical Connection 7 Adaptation to different types of gas 8 Building In 9 MANUFACTURER: ELECTROLUX HOME PRODUCTS ITALY S.p.A. Viale Bologna, 298 47100 FORLÌ (Italy) - Service and original spare parts 11 This appliance complies with the following E.E.C.
Using the hob correctly To ensure maximum burner efficiency, it is strongly recommended that you use only pots and pans with a bottom fitting the size of the burner used, so that flame will not spread beyond the bottom of the vessel. It is also advisable, as soon as a liquid starts boiling, to turn down the flame so that it will barely keep the liquid simmering. Burner Big (rapid) Medium (semirapid) Small (auxiliary) minimum diameter 160 mm. 120 mm. 80 mm. maximum diameter 260 mm. 220 mm. 160 mm.
Cleaning and Maintenance Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. General cleaning Wash the enamelled components with warm soapy water. Never use abrasive cleaners. Frequently wash the "caps" and the "crowns" with hot soapy water, carefully taking away any built-up of food. Regularly wipe over the hob top using a soft cloth weel wrung out in warm water to which a little liquid detergent has been added.
Technical Data Gas Burners Rating Rapid Burner 3,0 kW (G20) - 2,8 kW (G30/G31) Semirapid Burner 2,0 kW Auxiliary Burner 1,0 kW Appliance Class 3 Category II2H3B/P Setting Natural gas G 20 20 mbar Gas connection G 1/2" Electric hotplate (ZXL 636) Ø 145 mm. 1,5 kW Electric Supply 230 V ~ 50 Hz Hob recess dimensions Length Width 550 mm. 470 mm.
Electrical Connection The appliance is designed to be connected to 230 V monophase electricity supply. YES The connection must be carried out in compliance with the laws and regulations in force.
Adaptation to different types of gas Injectors replacement • Remove the pan supports. • Remove the burner's caps and crowns. • With a socket spanner 7 unscrew and remove the injectors (Fig. 7), and replace them with the ones required for the type of gas in use (see table 2). • Reassemble the parts, following the same procedure backwards. • Replace the rating label (placed near the gas supply pipe) with the relevant one for the new type of gas supply.
Building In PE SR SR R SR R A A 58 58 0 50 0 50 0 Mod. ZGL 646 0 Mod. ZXL 636 These hobs can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hobs dimensions are shown in the relevant diagram. The edge of the cut out must have a minimum distance from the rear wall of 55 mm. If there are side walls, or sides of the furniture unit near the hob, the cut out edges must have a minimum distance of 100 mm.
Possibilities for insertion Kitchen unit with door Kitchen unit with oven Proper arrangements must be taken in designing the forniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in Fig. 11. The panel fitted under the hob should be easily removable to allow an easy access if a technical assistance intervention is needed. The hob recess dimensions must comply the indication given in Figs.
Service and original spare parts This machine, before leaving the factory, has been tested and studied by many experts and specialists, in order to give you the best results. Any repair work which needs to be carried out should be done with the utmost care and attention. For this reason we reccomend that for any problem you contact the dealer who sold it to you, or our nearest authorized Service Centre, specifying the nature of the problem and the particular model which you own.
