EN User manual Induction Hob ZXE66X
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Installation instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Operating instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 3 5 6 Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11 Subject to change without notice Safety information For your safety a
Installation instructions Before the installation , note down the serial number (Ser. Nr.) from the rating plate. The rating plate of the appliance is on its lower casing. ZXE66X 58 GAD DA AU 220-240 V 50-60-Hz 949 594 203 01 Induction 3,7 kW 6,6 kW ZANUSSI The Safety Instructions Warning! You must read these! Make sure that the appliance is not damaged because of transportation. Do not connect a damaged appliance. If it is necessary, speak to the supplier.
Assembly min. 500 mm min. 50 mm min. 50 mm min. 5 mm R 5mm 600mm = 490+1mm 560+1mm = min. 20 mm min. 25 mm min. 5 mm If you use a protection box (the additional accessory), the front airflow space of 5 mm and protective floor directly below the appliance are not necessary. 4 min. 38 mm min.
Product description Cooking surface layout 1 2 145 120/180 mm 1 Single cooking zone 1200 W 2 Double cooking zone 700/1700 W 3 Induction cooking zone 1400 W (minimum cookware diameter - 125mm) 4 Control panel 5 Induction cooking zone 2300 W, with the Power function 3700 W (minimum cookware diameter 180mm) mm 145 210 3 mm mm 5 4 Control panel layout 1 2 3 4 5 6 7 B 10 9 8 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.
Sensor field Function 4 Timer indicators for the cooking zones It shows for which zone you set the time. 5 Timer display It shows the time in minutes. It increases or decreases the heat setting. / 6 It activates and deactivates the outer ring. 7 8 It increases or decreases the time. / 9 It selects the cooking zone. 10 It activates the Power function. Heat setting displays Display Description The cooking zone is deactivated. The Keep Warm function operates. The cooking zone operates.
• You use not correct cookware. The symbol comes on and the cooking zone deactivates automatically after 2 minutes. • You do not deactivate a cooking zone or change the heat setting. After some time, comes on and the appliance deactivates. See the table. The times of Automatic Switch Off The heat setting - The cooking zone deactivates after - 6 hours The heat setting Touch to increase the heat setting. Touch to decrease the heat setting.
the indicator of the cooking zone starts to flash slow, the time counts down. • To deactivate the Timer: set the cooking zone with and touch to deactivate the Timer. The remaining time counts back to 00 . The indicator of the cooking zone goes out. • To see the remaining time: set the cooking zone with . The indicator of the cooking zone starts to flash quickly. The display shows the remaining time. When the time comes to an end, the sound operates and 00 flashes. The cooking zone deactivates.
Energy saving • Put cookware on a cooking zone before you start it. • If it is possible, always put the lids on the cookware. Heat setting 1 Use to: Keep warm the food you cooked The Examples of cooking applications The data in the table is for guidance only.
To remove the dirt: 1. – Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the dirt can cause damage to the appliance. Use a special scraper for the glass . Put the scraper on the glass surface at an acute angle and move the blade on the surface . – Remove after the appliance is sufficiently cool: limescale rings , water rings, fat stains, shiny metallic discolorations. Use a special cleaning agent for glass ceramic or stainless steel. 2.
Problem Possible cause and remedy comes on. • The cookware is incorrect. Use the correct cookware. • There is no cookware on the cooking zone. Put cookware on the cooking zone. • The diameter of the bottom of the cookware is too small for the cooking zone. Use the correct cookware. and a number come on. There is an error in the appliance. Disconnect the appliance from the electrical supply for some time. Disconnect the fuse from the electrical system of the house. Connect again.
892934328-A-322010 www.zanussi.