REFRIGERATOR - FREEZER ZX77/3 ZX77/5 ZX79/3 ZX79/5 INSTRUCTION BOOKLET 214.3660.
Contents Instructions for the User Instructions for the Installer Safety Instructions 2 Technical Specifications 13 Description of the Appliance 3 Installation 14 Control Panel 4 Unpacking 14 Using the Appliance 5 Positioning 14 Before Use 5 Ventilation 14 Starting the Appliance 5 Leveling 14 Freezer Compartment 5 Freezing Fresh Food 5 Electrical Requirements 15 Frozen Food Storage 5 Changing the Opening direction 16 Refrigerator Compartment 5 of the Doors Chill Compar
Safety Instructions These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. If you are unsure of the meanings of these warnings contact the Customer Care Department. Installation This appliance is heavy. Care should be taken when moving it. It is dangerous to alter the specifications or attempt to modify this product in any way.
Description of Appliance The model shown here is ZK77/5W 0 nd By Sta 3 7 5 3 7 5 C 6 3 O L L E 9 C T I O N 12 Control Panel 1 2 3 Freezer Temperature Control Fridge Temperature Control ON/OFF Button 4 5 6 Door Alarm Temperature Alarm Fast Freezer Button 3
Control Panel The appliance controls are located in the top panel inside the refrigerator compartment. Thermostat Control The freezer and fridge thermostats control the temperature inside the freezer and refrigerator respectively. 1. The Freezer Temperature Control The freezer temperature control, regulates the temperature within the freezer compartment. A change in the control setting in the freezer compartment could affect the temperature in the refrigerator compartment under certain circumstances.
Using the Appliance This appliance is designed for domestic use only, specifically for storage of edible foodstuffs. This appliance is designed to operate in ambient temperatures (surrounding air temperature) between 10°C (50°F) and 32°C (90°F). If these temperatures are exceeded i.e. colder or warmer, the appliance may not operate correctly. Before Use Remove all transit packaging. Wash the inside of the appliance with lukewarm water with a little bicarbonate of soda added (5ml to 0.5 litre of water).
Food Storage Energy Saving Advice Do not install the cabinet close to sources of heat, such as a cooker, dishwasher or radiator. Locate the appliance in a cool well-ventilated room and make sure that the air openings of the cabinet are not obstructed. Avoid unnecessary frosting in the cabinet by packing all foodstuffs into airtight packages before placing them in the freezer. Always leave warm food to cool down to room temperature before placing in the fridge or freezer.
Maintenance and Cleaning Before any maintenance or cleaning work is carried out DISCONNECT the appliance from the ELECTRICITY supply. External Cleaning Wash the outer cabinet with warm soapy water. Do not use abrasive products. There may be sharp edges on the underside of the product so care should be taken when cleaning. Ensure the vents at the back of the appliance are clear of dust and debris etc.
Something Not Working If your appliance is not operating correctly, carry out the following checks before contacting your local Service Force Centre. Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is under guarantee.
Normal Operating Sounds 1. Temperature control 2. Cooling system 3. Motor 4. Fans May cause clicking sounds when the system is connected or disconnected. The injected cooling gas may produce a gurgling sound while passing through the tubes. May cause a humming noise and or slight knocking sound. You may occasionally hear the fans working. This is normal; the fans help to ensure the air circulates more effectively.
GUARANTEE CONDITIONS Standard guarantee conditions We, Zanussi, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
Zanussi Service Force To contact your local Zanussi Service Centre telephone 08705 CHANNEL ISLANDS GUERNSEY Guernsey Electricity PO Box 4 Vale, Guernsey Channel Islands GY1 3AD JERSEY Jersey Electricity Company Haut De Lorme Rue De Haut De Lorme Trinity Jersey Channel Islands JE3 3FG ORKNEY 7 King Street Kirkwall Orkney KW15 1JF PERTH (OWN SALES) EDINBURGH SCOTLAND ABERDEEN 54 Claremont Street Aberdeen AB10 6RA AUCHTERMUCHY 33a Burnside Auchtermuchy Fife KY14 7AJ BLANTYRE Unit 5 Block 2 Auchenr
Zanussi Service Force To contact your local Zanussi Service Centre telephone 08705 MIDLANDS BIRMINGHAM 66 Birch Road East Wyrley Trading Estate Wilton Birmingham B6 7DB BOURNE Pinfold Road Bourne PE10 9HT BRIDGNORTH 68 St.
Technical Specifications A distance of 56mm must exist between the appliance and the wall, to allow the door to be fully opened. The refrigeration system and the insulation of this appliance do not contain CFCs or HCFCs. ZX79/5W(SI) ZX77/5W(SI)(SA) ZX77/3W(SI) ZX79/3W(SI) Height (mm) 2010 1860 1710 1860 Width (mm) 595 595 595 595 Depth (mm) 670 670 670 670 Power Supply 220-240V / 50Hz Total Power Absorbed 220-240V / 50Hz 220-240V / 50Hz 220-240V / 50Hz 602 584 529 584 492.
Installation Unpacking Remove all transit packaging, including the door transit retainers located under the plinth. (Fig 1) and shelf retainers (Fig 2). Fig. 1 Positioning The appliance should be located in a well-ventilated, dry room. To ensure correct operation the appliance should: Not be exposed to direct sunlight. Not be installed next to radiators, cookers or other sources of heat.
Electrical Connection Any electrical work required to install this appliance must be carried out by a qualified electrician or competent person. This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed. Electrical Requirements Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The appliance is supplied with a 13 amp plug fitted.
Changing the opening direction of the doors If you wish to change the opening direction of the doors, proceed as follows: 1. Open the freezer door. Remove the plinth (A) at the bottom of the appliance, by pushing downwards and pulling outwards. (See fig 5) B 2. Remove the hinge cover (B) in the plinth and reposition on the opposite side of the plinth. 3. Whilst supporting the lower door, use a 8mm nut driver to remove the 4 hinge retaining bolts and remove the lower hinge. 4.