User Manual GETTING STARTED? EASY.
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
• • • • • Old hose sets must not be reused. If the mains power supply cable is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam to clean the appliance. Clean the appliance with a moist cloth. Use only neutral detergents.
• • • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. Make sure that all metal objects are removed from the laundry. Do not wash fabrics which are heavily soiled with oil, grease or other greasy substances. It can damage rubber parts of the washing machine. Prewash such fabrics by hand before loading them into the washing machine. SERVICE • To repair the appliance contact an Authorised Service Centre. • Use original spare parts only.
CONTROL PANEL CONTROL PANEL DESCRIPTION Finish In Cotton Cotton ECO Synthetics Delicates Wool/Handwash Refresh 20 min Mix 20° 1 90° 1000 Quick 60° 800 Intensive 40° 600 Easy Iron Rinse 30° Drain & Spin 2 3 1 On/Off button On/Off 4 5 6 7 8 9 6 Start/Pause touchpad 2 Programs selection touchpad 3 Temperature selection touchpad 7 Finish In touchpad 8 Display 4 Spin selection touchpad 9 Door locked indicator 5 Options selection touchpad DISPLAY A.
PROGRAMME CHART Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) 30'@30° 30°C 2 kg 800 rpm A short cycle for synthetic and delicate items with light soil level or for items to freshen up. Cotton 90°C - Cold 6 kg 1000 rpm White cotton and coloured cotton. Normal soil and light soil. Cotton 6 kg 1000 rpm White cotton and fast-coloured cotton. Normal soil.
30'@30° ■ ■ Cotton ■ ■ ■ ■ Cotton ECO ■ ■ ■ ■ Synthetics ■ ■ ■ ■ ■ Delicates ■ ■ ■ ■ ■ Wool/Handwash ■ ■ Refresh 20 min ■ Mix 20° ■ Drain & Spin Rinse Easy Iron Programme Intensive Quick1) Programme options compatibility ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 1) When you set this option, we recommend that you decrease the quantity of the laundry.
Programmes Load (kg) Energy consumption (kWh) Water consumption (litre) Approximate Remaining programme duration (mi- moisture (%)1) nutes) Cotton 60°C 6 1,10 56 180 53 Cotton 40°C 6 0,65 54 150 53 Synthetics 40°C 2,5 0,45 46 105 35 Delicates 40°C 2,5 0,55 46 90 35 1 0,35 50 65 30 6 0,79 47 248 53 3 0,58 39 174 53 3 0,48 38 169 53 Wool/Handwash 30°C 2) Standard cotton programmes Standard 60°C cotton Standard 60°C cotton Standard 40°C cotton 1) At the end of
• • The drum turns regularly to prevent the laundry creases. The lid stays locked. You must drain the water to unlock the lid. To drain the water refer to ‘At the end of the programme’. QUICK With this option you can decrease the programme duration. Use this option for items with light soil or items to refresh. The related indicator comes on. INTENSIVE With this option you can wash very soiled laundry. The washing cycle lasts longer with this option. The related indicator comes on.
If you deactivate the acoustic signals, they continue operate when the appliance has a malfunction. BEFORE FIRST USE 1. Put a small quantity of detergent in the compartment for washing phase. 2. Set and start a programme for cotton at the highest temperature without laundry. This removes all possible dirt from the drum and the tub. DAILY USE WARNING! Refer to Safety chapters. ACTIVATING THE APPLIANCE Press and hold for a couple of seconds the On/Off button to activate or deactivate the appliance.
• • • The indicator of the button stops to flash and stays on. The programme starts, the lid locks, the indicator is on. The drain pump can operate for a short time at the beginning of the washing cycle. After approximately 15 minutes from the start of the programme: • The appliance adjusts automatically the programme duration agree with the laundry load. • The display shows the new value. 1. Touch the button again and again to choose the number of hours in which you want the washing cycle to be finished.
• Remove the laundry from the appliance. Make sure that the drum is empty. • Press the button On/Off for some seconds to deactivate the appliance. • Close the water tap. • Keep the lid ajar, to prevent the mildew and odours. The washing programme is completed, but there is water in the drum: • The drum turns regularly to prevent the creases in the laundry. • The indicator the water. • The lid lock indicator flashes to remind you to drain is on. The indicator of button flashes. The lid stays locked.
• • • • • – liquid detergents, preferably for low temperature wash programmes (60 °C max) for all types of fabric, or special for woollens only. Do not mix different types of detergents. To help the environment, do not use more than the correct quantity of detergent. Obey the instructions that you find on the on packaging of these products. Use the correct products for the type and colour of the fabric, the programme temperature and the level of soil.
CLEANING THE DRAIN FILTER Do not clean the drain filter if the water in the appliance is hot. 1 2 3 4 5 CLEANING THE INLET HOSE AND THE VALVE FILTER 1 1 2 3 4 90˚ 2 3 FROST PRECAUTIONS If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. Do this procedure also when you want to do the emergency drain. 1. Disconnect the mains plug from the mains socket. 2.
TROUBLESHOOTING WARNING! Refer to Safety chapters. INTRODUCTION The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the table). If the problem persists, contact the Authorised Service Centre. With some problems, the acoustic signals operate and the display shows an alarm code: • • - The appliance does not drain the water. • - The appliance lid or drum doors are open or not closed correctly.
Problem The spin phase does not operate or the washing cycle lasts longer than usually. Possible solution • • • • There is water on the floor. • • • Adjust manually the items in the tub and start the spin phase again. This problem may be caused by balance problems. Set the spin option. Set the drain option if you set an option which ends with water in the drum. Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to 'Care and cleaning'.
Electrical connection Voltage Overall power Fuse Frequency 220-230 V 2200 W 10 A 50 Hz Level of protection against ingress of solid particles and moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture IPX4 Water supply pressure 0,5 bar (0,05 MPa) 8 bar (0,8 MPa) Minimum Maximum Cold water Water supply 1) Maximum Load Cotton 6 kg Energy Efficiency Class Spin Speed A+++ Maximum 1000 rpm 1) Connect the water inlet hose to a water tap w
192946020-A-512016 WWW.ZANUSSI.