EN User manual Washer-dryer ZWT 71401 WA
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Personalisation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Use - Drying _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11 Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ 13 Washing programmes _ _ _ _ _ _ _ _ _ _ _ 15 Drying Pr
• Do not change the specification of this appliance. • Obey the maximum load volume of 7 kg (refer to the “Programme chart” chapter). • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • The operating water pressure (minimum and maximum) must be between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa) • The ventilation openings in the base (if applicable) must not be obstructed by a carpet.
Water connection • Make sure not to cause damage to the water hoses. • The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. • Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean. • The first time you use the appliance, make sure that there is no leakage. Use • • • • • Warning! Risk of injury, electrical shock, fire, burns or damage to the appliance.
Service • Contact the Service to repair the appliance. We recommend only the use of original spare parts. Product description Your new appliance meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. Its new washing system allows total use of detergent and reduces water consumption so saving energy. 2 1 3 4 5 6 1 Detergent dispenser drawer 2 Control panel 4 Rating Plate 5 Drain pump 3 Door opening handle 6 Adjustable feet www.zanussi.
Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain remover used during the stain action phase (if available). The prewash and soak detergent is added at the beginning of the wash programme. The stain remover is added during the stain action phase. Compartment for powder or liquid detergent used for main wash. If using liquid detergent pour it just before starting the programme. Compartment for liquid additives (fabric softener, starch).
10 1 2 1 Programme selector dial 2 SPIN reduction button 3 OPTIONS button – SUPER QUICK – ECONOMY 4 EXTRA RINSE button 5 DRYING TIME button 6 EASY IRON button 7 Display 8 START/PAUSE button 9 DOOR LOCKED pilot light 10 DELAY START button Programme Selector Dial It allows you to switch the appliance on/off and/ or to select a programme. Spin By pressing this button you can change the spin speed of the set programme or select the available option(s).
Easy Iron By selecting this option the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier. Furthermore the machine will perform some additional rinses in some programmes. On cotton programmes the maximum spin speed is reduced automatically. • light on: the door cannot be opened. The machine in working or has stopped with water left in the tub. • light off: the door can be opened. The programme is finished or the water has been emptied out.
• Ensure that the electrical and water connections comply with the installation instructions. • Remove the polystyrene block and any material from the drum. • Pour 2 litres of water into the main wash of the detergent drawcompartment er in order to activate the ECO valve. Then run a cotton cycle at the highest temperature without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash compartment and start the machine.
ted after choosing the desired programme and before pressing button 8. When these buttons are pressed, the corresponding icons appear on the display. When they are pressed again, the icons disappear. If an incorrect option is selected, the integrated red pilot light of the button 8 flashes for 3 times and the Err message appears on the display for a few seconds. Select the required programme by turning the programme selector dial (1) Turn the programme selector dial to the required programme.
Important! The selected delay can be changed only after selecting the washing programme again. The Delay Start can not be selected with DRAIN programme. Start the programme by pressing button 8 To start the selected programme, press the button 8, the green pilot light of the button 8 stops blinking. To interrupt a programme which is running, press the button 8: the green pilot light starts blinking. To restart the programme from the point at which it was interrupted, press the button 8 again.
By pressing Drying Time button it is also possible to dry up to 4 kg of cotton items (see the «Drying Programme » table). Warning! The water tap must be open and the drain hose must be positioned in the sink or connected to the drain pipe. 1. Load the laundry. 2. Select a spin cycle at the maximum spin speed allowed for the type of laundry in order to obtain the best drying performances. 3. Select the drying programme for Cottons or Synthetic in the Drying sector of the programme selector dial. 4.
Helpful hints and tips Sorting out the laundry Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. • Delicate fabrics and woollens: drum no more than one third full. Washing a maximum load makes the most efficient use of water and energy. For heavily soiled laundry, reduce the load size.
Ball point pen and glue: moisten with acetone1), lay the garment on a soft cloth and dab the stain. Lipstick: moisten with acetone as above, then treat stains with methylated spirits. Treat any residual marks with bleach. Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Treat any residual marks with bleach.
ments such as anoraks, bed covers, quilts, sleeping bags and duvets must not be machine dried. • Avoid drying dark clothes with light coloured fluffy items such as towels as these can attract the fluff. • Remove the laundry when the appliance has finished drying. • To avoid a static charge when drying is completed, use either a fabric softener when you are washing the laundry or a fabric conditioner specifically for tumble dryers.
Programme Maximum and Minimum Temperature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry 6–8 — COTTONS WITH PREWASH 90°-40° Prewash - Main wash - Rinses Long spin at maximum speed Max. load 7 kg - Reduced load 3,5 kg 1) For white or coloured cottons with prewash phase (heavily soiled items). Options SPIN RINSE HOLD ECONOMY SUPER QUICK EXTRA RINSE EASY IRON 9–12 — SYNTHETICS 60°(Cold) Main wash - Rinses Short spin at 900 rpm Max.
Programme Maximum and Minimum Temperature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Detergent Compartment 20 — COTTON DRYING Drying programme for cotton items 21 — SYNTHETICS DRYING Drying programme for synthetic items SPECIAL PROGRAMMES 22 — RINSES Rinses Long spin at maximum speed Max. load 7 kg With this programme it is possible to rinse and spin cotton garments which have been washed by hand. The machine performs 3 rinses, followed by a final long spin.
Drying Programmes Degree of Drying Type of Fabric Max Load Spin Speed Suggested drying time in Mins Ideal for towelling materials Cotton and linen (bathrobes, bath towels, etc) 4 kg 3 kg 1,5 kg 1400 160-180 110-120 75-85 Suitable for items to put away without ironing Cotton and linen (bathrobes, bath towels, etc) 4 kg 3 kg 1,5 kg 1400 150-170 100-110 65-75 Suitable for items to put away without ironing Synthetics and mixed fabrics 2 kg 1 kg 900 90-100 55-65 Suitable for ironing Cotton a
Cleaning the drawer recess Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse programme without any clothes in the drum. Cleaning the pump The pump should be inspected regularly and particularly if: • the appliance does not empty and/or spin; • the appliance makes an unusual noise during draining due to objects such as safety pins, coins etc.
Caution! When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When refitting the pump cover, ensure it is securely retightened so as to stop leaks and young children being able to remove it.
• screw the pump cover again and close the door. Important! Every time you drain the water through the emergency emptying hose you must pour 2 litres of water into the main wash compartment of the detergent drawer and then run the drain programme. This will activate the ECO Valve device avoiding that part of the detergent remains unused at next washing. What to do if… Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer.
Problem Possible cause/Solution The machine does not empty and/or does not spin: The drain hose is squashed or kinked. E20 • Check the drain hose connection. The drain filter is clogged. E20 • Clean the drain filter. An option or a programme that ends with the water still in the tub or that eliminates all the spinning phases has been selected. • Select the draining or spinning programme. The laundry is not evenly distributed in the drum. • Redistribute the laundry.
Problem Possible cause/Solution Spinning starts late or the machine does not spin: The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after 10 minutes, the laundry is still not evenly distributed in the drum, the machine will not spin.
Technical data Dimensions Width Height Depth 60 cm 82 cm 54 cm Electrical connection Voltage - Overall power - Fuse Information on the electrical connection is given on the rating plate, on the inner edge of the appliance door.
After removing all the packaging, carefully lay machine on it's back to remove the polystyrene base from the bottom. Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable. If necessary, check the setting with a spirit level. Remove the power supply cable and the hose from the hose holders on the rear of the appliance. Any necessary adjustment can be made with a spanner.
Hooked over the edge of a sink using the plastic hose guide. 35° 45° Open the porthole and extract the inlet hose. Connect the appropriate end of the hose to the appliance with the angled connection as showed in the picture. Do not place the inlet hose downwards. Angle the hose to the left or right depending on the position of your water tap. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks . Connect the other end of the inlet hose to a tap with a 3/4” thread.
Fig. 1 600 mm min. 596 mm 560 mm 555 mm min. 820 mm 818 mm 75 mm 60 mm 100 mm 170 mm Preparation and assembly of the door The appliance is originally prearranged for the assembly of a door opening from right to left (Fig. 2). b) Hinges To mount the hinges it is necessary to drill two holes (dia. 35 mm, depth 12.5-14 mm depending on the depth of door furniture) on the inner side of the door. The distance between the holes hobs fixing centres must be 416 mm.
To enable a correct operation of this device, it is necessary to screw the counter-magnet A (steel disk + rubber ring) into the inner side of the door. Its position must correspond to the magnet B on the appliance (Fig. 6). Warning! Do not remove the screw C. and the plate C. Mount the counter-magnet D and the hinges A as previously described (Fig. 7). Warning! Do not remove the screw B. Fig. 7 Fig.
Ecological hints To save water, energy and to help protect the environment, we recommend that you follow these tips: • Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!). www.zanussi.com • The machine works more economically if it is fully loaded. • With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature.
www.zanussi.
www.zanussi.
132928351-A-502012 www.zanussi.