User Manual GETTING STARTED? EASY.
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
• • • • • • • • • Do not exceed the maximum load of 7 kg (refer to the "Programme chart" chapter). The operating water pressure at the water entry point from the outlet connection must be between 0.5 bar (0.05 MPa) and 8 bar (0.8 MPa). The ventilation opening in the base must not be covered by a carpet, mat, or any floor covering. The appliance must be connected to the water mains using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre.
ELECTRICAL CONNECTION USE WARNING! Risk of injury, electric shock, fire, burns or damage to the appliance. WARNING! Risk of fire and electric shock. • • • • • • • • • The appliance must be earthed. Always use a correctly installed shockproof socket. Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. Do not use multi-plug adapters and extension cables. Make sure not to cause damage to the mains plug and to the mains cable.
PRODUCT DESCRIPTION APPLIANCE OVERVIEW 1 2 1 Worktop 2 Detergent dispenser 3 3 Control panel 4 Rating plate 5 Door handle 6 Drain pump filter 4 7 Feet for levelling the appliance 5 6 7 CONTROL PANEL CONTROL PANEL DESCRIPTION 1 2 3 4 Delay Start Special Cotton Jeans Mini 30 Normal + Prewash 90° 1000 60° 5 shirts Cotton Eco Synthetics Easy Iron 40° 700 30° 500 Mix 20° Spin Drain Delicates Rinse Wool/ Handwash Temperature 10 1 Programme knob 2 Display 3 Delay Start button 4 Door
9 Spin button 10 Temperature button DISPLAY A B A. The delay start . When you press the delay start button, the display shows the delay start time. B. The child lock indicator. The indicator comes on the display when the related option is set. C. This area shows: • The programme time. • The alarm codes. If the appliance has a malfunction, the display shows the alarm codes. Refer to the chapter 'Troubleshooting' .
Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) 3 kg 1000 rpm Special programme for cotton, synthetic and mixed fabrics lightly soiled. Select this programme to reduce the energy consumption. Make sure that the detergent is suitable for low temperatures in order to have good washing results2). 3 kg 700 rpm Delicate fabrics such as acrylics, viscose and mixed fabrics requiring gentler washing. Normal soil. 1.
Programme Temperature range 7 kg 1000 rpm Jeans 60°C - Maximum load Maximum spin speed Programme description (Type of load and soil level) Items in denim and jersey. Also for dark coloured items. (Cold) 1) Standard programmes for the Energy Label consumption values. According to regulation 1061/2010, these programmes are respectively the «Standard 60°C cotton programme» and the «Standard 40°C cotton programme».
Delay Start Extra Rinse 2) Quick Wash 1) Rinse Hold Spin Programme ■ Drain Spin ■ ■ Easy Iron ■ 5 shirts ■ ■ Mini 30 ■ ■ Jeans ■ ■ ■ ■ ■ ■ ■ 1) If you set the shortest duration, we recommend that you decrease the load size. It is possible to fully load the appliance, however the washing results can be less satisfactory. 2) If you set Extra Rinse option, the appliance adds some additional rinses.
Programmes Load (kg) Energy consumption (kWh) Water consumption (litre) Approximate Remaining programme duration (mi- moisture (%)1) nutes) Cotton - Normal 60°C 7 1.30 61 200 60 Cotton - Normal 40°C 7 1.00 61 186 60 Synthetics 40°C 3 0.65 58 125 37 Delicates 40°C 3 0.53 47 55 37 1.5 0.45 59 69 32 7 0.90 46 223 60 3.5 0.69 36 186 60 3.5 0.
• The door stays locked. You must drain the water to unlock the door. To drain the water refer to ‘At the end of the programme’. QUICK WASH Press this button to decrease the programme duration. Set this option for items with light soil or items to refresh. EXTRA RINSE With this option you can add some rinses to a washing programme. Use this option for persons allergic to detergents and in areas where the water is soft. The related indicator comes on.
LOADING THE LAUNDRY Open the water tap. Connect the mains plug to the mains socket. 1. Pull the door handle to open the appliance door. 2. Put the laundry in the drum, one item at a time. 3. Shake the items before you put them in the appliance. Make sure not to put too much laundry in the drum. Refer to max. loads indicated in "Programme chart". 4. Close the door. 1 Detergent compartment for prewash phase or soak programme (if available).
B 2 1 The position B of the detergent divider is for powder detergent in the rear compartment and for liquid detergent/additive or bleach in the front compartment. To use only liquid detergent: Insert the detergent divider in position C. activate an option, the indicator of the set option comes on. If you set something incorrect, the display shows the message STARTING A PROGRAMME WITHOUT THE DELAY START Press the button Start/Pause.
Before starting the new programme the appliance could drain the water. In this case, make sure that the detergent is still in the detergent compartment, if not fill the detergent again. INTERRUPTING A PROGRAMME AND CHANGING THE OPTIONS You can change only some options before they operate. 1. Press the button Start/Pause. The indicator flashes. 2. Change the options. 3. Press the button Start/Pause again. The programme continues.
• • • Be careful with the curtains. Remove the hooks and put the curtains in a washing bag or pillowcase. Do not wash laundry without hems or with cuts. Use a washing bag to wash small and/or delicate items (e.g. underwired bras, belts, tights, etc. ). A very small load can cause balance problems with the spin phase. If this occurs, adjust manually the items in the tub and start the spin phase again. STUBBORN STAINS For some stains, water and detergent is not sufficient.
DOOR SEAL Regularly examine the seal and remove all objects from the inner part.
9 10 2 1 CLEANING THE INLET HOSE AND THE VALVE FILTER 1 1 2 3 4 2 45° 3 20° EMERGENCY DRAIN Because of a malfunction, the appliance cannot drain the water. If this occurs, do steps (1) through (10) of 'Cleaning the drain filter'. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate again the drain system: 1.
• - The mains supply is unstable. Wait until the mains supply is stable. • - No communication between electronic elements of the appliance. Switch off and switch on again. The programme was not finished properly or the appliance stopped too early. If the alarm code appears again, contact the Authorised Service Centre. WARNING! Deactivate the appliance before you do the checks. POSSIBLE FAILURES Problem The programme does not start.
Problem The appliance makes an unusual noise. Possible solution • • • Make sure the levelling of the appliance is correct. Refer to 'Installation'. Make sure that the packaging and/or the transit bolts are removed. Refer to 'Installation'. Add more laundry in the drum. The load may be too small. The cycle is shorter than the time displayed. The appliance calculates a new time according to the laundry load. See the ‘Consumption Values’ chapter. The cycle is longer than the time displayed.
ENVIRONMENTAL CONCERNS with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office. Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances.
155255171-A-132018 WWW.ZANUSSI.
