EN User Manual Washing Machine ZWSH7100VS
Contents Safety information Safety Instructions Product description Control panel Programme Chart Consumption values Options 2 3 4 5 6 8 8 Settings Before first use Daily use Hints and tips Care and cleaning Troubleshooting Technical Data 9 9 9 12 13 15 17 Subject to change without notice. Safety information Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages.
• • • • • • The ventilation openings in the base (if applicable) must not be obstructed by a carpet. The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
Use WARNING! • Risk of injury, electrical shock, fire, burns or damage to the appliance. • • • • • Use this appliance in a household only. Obey the safety instructions on the detergent packaging. Do not put flammable products or items that are wet with flammable products in, near or on the appliance. Make sure that you remove all metal objects from the laundry. Do not put a container to collect possible water leakage under the appliance.
Control panel Control panel description 1 2 10 1 Programme knob 2 Display 3 Delay Start button (Отложенный старт) 9 8 7 6 3 4 5 7 Super quick button (Супер Быстрый) 8 Rinse Hold button (Остановка полоскания) 9 Spin reduction button (Отжим) 4 Door locked indicator 5 Start/Pause button (Старт/Пауза) 10 Temperature button (Температура) 6 Extra Rinse button (Доп. полоскание) Display A B C A) The delay start . When you press the delay start button, the display shows the delay start time.
Programme Chart Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) Washing programmes Хлопок 7 kg 1000 rpm White cotton and coloured cotton. Normal soil and light soil. 7 kg 1000 rpm White cotton and coloured cotton. Heavy soil and normal soil. 7 kg 1000 rpm White cotton and colour-fast cotton. Normal soil. The energy consumption decreases and the time of the washing programme is extended.
Programme Temperature range Джинсы 60°C - (Cold) Maximum load Maximum spin speed 7 kg 1000 rpm Programme description (Type of load and soil level) Items in denim and jersey. Also for dark coloured items. 1) Cottons energy saving programme. This programme at a 60ºC with a load of 7 is the reference programme for data entered in the energy label, in compliance with EEC 92/75 standards. Set this programme to have a good washing results and decrease the energy consumption.
Consumption values The data of this table are approximate. Different causes can change the data: the quantity and type of laundry, the water and ambient temperature. Programmes Load (kg) Energy consumption (kWh) Water consumption (litre) Approximate programme duration (minutes) Cottons 60 °C 7 1.13 69 147 Cotton Energy Saving Programme 60 °C 1) 7 0.90 46 223 Cottons 40 °C 7 0.66 53 120 Synthetics 40 °C 3 0.50 49 66 Delicates 40 °C 3 0.51 49 47 1.5 0.
Доп. полоскание Door locked indicator With this option you can add some rinses to a washing programme. With this option you can delay the start of a programme from 30 minutes to 20 hours. Use this option for persons allergic to detergents and in areas where the water is soft. The indicator shows when the door can be opened: • The indicator is on: the door cannot be opened. • The indicator flashes: the door is opening in some minutes. • The indicator is off: the door can be opened.
CAUTION! Liquid or powder detergent Pull out the detergent dispenser until it stops. The position A of the detergent divider is for powder detergent. Make sure that no laundry stays between the seal and the door. There is a risk of water leakage or damage to the laundry. To use liquid detergent: 1. Remove detergent divider from the position A. Using detergent and additives 2 1 1. Measure out the detergent and the fabric conditioner. 2. Carefully close the detergent drawer.
If you set something incorrect, the display shows the message . Starting a programme without the delay start Press the button Старт/Пауза. • The indicator of the button Старт/ Пауза stops to flash and stays on. • The programme starts, the door locks, the indicator is on. • The programme starts and the door locks. • The programme time decreases with steps of one minute. The drain pump can operate for a short time at the beginning of the washing cycle. Starting a programme with the delay start option 1.
Turn the programme knob to position to deactivate the appliance. • You can open the door. • Remove the laundry from the appliance. Make sure that the drum is empty. • Close the water tap. • Keep the door and the detergent drawer ajar, to prevent the mildew and odours. The washing programme is completed, but there is water in the drum: • The drum turns regularly to prevent the creases in the laundry. • The indicator Остановка полоскания stays on to remind you to drain the water.
• If your appliance has not the detergent dispenser with the flap device, add the liquid detergents with a dosing ball (supplied by the detergent's manufacturer). Ecological hints • • • • Set a programme without the prewash phase to wash laundry with normal soil. Always start a washing programme with the maximum load of laundry. If necessary, use a stain remover when you set a programme with a low temperature.
5 6 9 10 2 Cleaning the detergent dispenser 1 2 1 Cleaning the inlet hose and the valve filter 1 1 2 2 3 3 4 3 4 45° 20° 5 1 6 Because of a malfunction, the appliance cannot drain the water. 2 7 Emergency drain If this occurs, do steps (1) through (10) of 'Cleaning the drain filter'. If necessary, clean the pump. 8 When you drain the water with the emergency drain procedure, you must activate again the drain system: 1.
remaining water from the inlet hose and the drain pump. 5. When the drain pump is empty, install the inlet hose again. WARNING! 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Put the two ends of the inlet hose in a container and let the water flow out of the hose. 4. Empty the drain pump. Refer to the emergency drain procedure. Make sure that the temperature is more than 0 °C before you use the appliance again.
Problem The appliance does not drain the water. Possible solution • • • • • • • • The spin phase does not operate or the washing cycle lasts longer than usually. • There is water on the floor. • • • Make sure that the sink spigot is not clogged. Make sure that the drain hose has no kinks or bends. Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to 'Care and cleaning'. Make sure that the connection of the drain hose is correct.
Technical Data Dimension Width/ Height/ Depth/ Total depth 595 mm / 850 mm / 450 mm / 490 mm Electrical connection Voltage Overall power Fuse Frequency 230 V 2200 W 10 A 50 Hz Level of protection against ingress of solid particles and moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture IPX4 Water supply pressure 0,5 bar (0,05 MPa) 8 bar (0,8 MPa) Minimum Maximum Cold water Water supply 1) Maximum Load Cotton 7 kg Spin Speed Maxi
www.zanussi.
www.zanussi.
155248620-A-042014 www.zanussi.