EN User manual Washing Machine ZWP 581 ZWQ 5102 ZWQ 5103 ZWQ 5122
Contents Safety Information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ How to run a wash cycle? _ _ _ _ _ _ _ _ _ _ _ _ _ _ Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 3 4 4 5 7 Operating Problems _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Detergents and Additives _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Technical Specifications _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Co
• Refer to the instructions on the label of each item before washing. • Do not put items into the washing machine which have had stains removed with petrol, alcohol, trichlorethylen etc. If such stain removers have been used, wait until the product has evaporated before putting these items into the drum. • Empty pockets and unfold items.
Dispenser box Prewash Wash Softener (do not fill above the MAX symbol M ) How to run a wash cycle? Using for the first time • Ensure the electrical and water connections comply with the installation instructions. • Remove the polystyrene insert and all other items inside the drum. • Run an initial wash cycle at 90°C, without any washing but with detergent to clean the water tank. Daily use Loading washing • Open the lid of the appliance.
patible with the selected programme, the “Start/Pause” pushbutton flashes red. “Prewash” option The appliance runs a prewash at 30°C max. “Quick” option The washing time will be reduced depending on the programme selected. “Extra Rinse” option The washing machine will add one or more rinses during the cycle. This option is recommended for people with sensitive skin and in soft water areas. Start of the programme Press the “Start/Pause” pushbutton to start the cycle.
Programme / Type of washing Load Available options Synthetics (30° - 60°) : Synthetic fabrics, body linen, coloured fabrics, non-iron shirts, blouses. Max. spin speed: 900 rpm (850 rpm for model ZWP581) 2,5 kg Rinse hold, Quick, Prewash, Extra rinse, Delay start Easy iron (40°) : For cottons and synthetics. Reduces creasing and makes ironing easier. Max.
Programme / Type of washing Load Spin : A spin cycle from 500 to 850 rpm for model ZWP581/ 1000 rpm for model ZWQ5102,ZWQ5103/ 1200 rpm for model ZWQ5122 after a Rinse hold option. Available options 5,5 kg Delay start 1) We recommend not to add any detergent for prewash phase. Care and cleaning Unplug the appliance before cleaning. Descaling the appliance To descale the appliance, use an appropriate non-corrosive product designed for washing machines.
Operating Problems Numerous checks were carried out on your appliance before it left the factory. However, should you notice a malProblems function, please refer to the sections below before contacting the after-sales service.
Problems Causes The wash cycle is much too long: • • • • • the water inlet filters are dirty (see “Care and cleaning ”), the power or water supply has been cut off, the motor overheating detector has been activated, the water inlet temperature is lower than usual, the foam detection security system has been activated (too much detergent) and the washing machine has begun draining the foam, • the out of balance detector has been activated: an extra phase has been added to distribute washing more evenly i
Technical Specifications DIMENSIONS Height Width Depth 850 mm 400 mm 600 mm LINE VOLTAGE /FREQUENCY POWER CONSUMPTION FUSE 230 V / 50 Hz 2300 W 10 A Level of protection against ingress of solid particles and moisture IPX4 Water supply Cold water WATER PRESSURE Minimum Maximum 0,05 MPa (0,5 bar) 0,8 MPa (8 bar) Connection to water supply Type 20/27 Consumption values Programme Energy consumption (kWh)1) Water consumption (litre)1) Programme duration (Minutes)1) White Cottons 90 °C 2.
Unpacking Water supply 1 1 2 2 90O In case of necessity move the inlet hose in the direction shown on picture. To make this loose the inlet hose ring nut and position the inlet hose downwards as drawn on picture. Tighten the ring nut back and make sure there are no leaks. 1 2 Untying A B A Drainage C D 2 Open the water inlet tap. Check there are no leaks. The water inlet hose can not be extended. If it is too short, please contact the after-sales service.
Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
192987810-A-222011 www.zanussi.
