User manual

Programmes Load
(kg)
Energy con-
sumption
(kWh)
Water con-
sumption (litre)
Approximate
programme
duration (mi-
nutes)
Remaining
moisture
(%)
1)
Cottons 60 °C 8 1.4 63 160 53
Cottons 40 °C 8 0.6 63 130 53
Synthetics 40 °C 3,5 0.6 54 80 35
Delicates 40 °C 3 0.6 63 65 35
Wool/Hand wash
30 °C
2 0.25 55 60 30
Standard cotton programmes
Standard 60 °C
cotton
8 1.17 61 205 53
Standard 60 °C
cotton
4 0.77 49 159 53
Standard 40 °C
cotton
4 0.7 48 161 53
1) At the end of spin phase.
Off Mode (W) Left On Mode (W)
0.10 0.98
The information given in the charts above are in compliance with the EU Commission regulation 1015/2010
implementing directive 2009/125/EC.
Installation
Rubber feet kit (4055126249)
Available from your authorized dealer.
The rubber feet are particularly recommended
on floating, slippery and wooden floors.
Mount the rubber feet to prevent vibration,
noises and displacement of the appliance dur-
ing operation.
Read carefully the instructions supplied with
the kit.
Fixing plate kit (4055171146)
Available from your authorized dealer.
If you install the appliance on a plinth, secure
the appliance in the fixing plates.
Follow the instructions supplied with the kit.
Unpacking
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all transit devices so
that they can be refitted if the machine ever has
to be transported again.
After removing all the
packaging, carefully
lay machine on it's
back to remove the
polystyrene base
from the bottom.
Remove the power
supply cable and the
hose from the hose
holders on the rear of
the appliance.
22
www.zanussi.com