User manual

MAX
• Pull out the dis-
penser drawer until
it stops.
The flap is down and you wish to use
powder detergent:
• Turn the flap up.
MAX
• Measure out the
detergent.
• Pour the powder
detergent into the
main wash com-
partment
.
• Remove the remaining powder form
the flap.
• There is remaining powder detergent
in the main wash compartment at the
end of a washing programme. Check
if the flap is in the right position.
The flap is up and you wish to use liquid
detergent:
• Turn the flap down.
MAX
• Measure out the
detergent.
For the quantity
of detergent, re-
fer always to what is
written on the prod-
uct packing and en-
sure that the deter-
gent can be poured
in the drawer.
• Pour the liquid detergent in the compart-
ment
without exceeding the limit indica-
ted in the flap.
• Close the dispenser drawer.
Warning! Do not use the flap in "DOWN"
position with:
• Gelatinous detergent or thick detergent.
• Powder detergent.
• With programmes with prewash.
• Do not use liquid detergent if the washing
programme doesn't start immediately.
In these cases, use the flap in "UP" position .
Select the required programme by means
of the programme selector dial (1)
Turn the programme selector dial to the re-
quired programme.
The green pilot light of button 7 starts to flash.
The selector dial can be turned either clockwise
or anticlockwise.
Turn the selector dial to position
to reset the
programme/to switch the machine OFF.
At the end of the programme the selector
dial must be turned to position
, to
switch the machine off.
Important! If you turn the programme selector
dial to another programme when the machine is
working, the red pilot light of button 7 will blink
3 times and the messageErr is displayed to
indicate a wrong selection. The machine will
not perform the new selected programme.
9
www.zanussi.com