32990210.
132990210.qxd 20/02/2004 15:17 Pagina 2 (Nero/Process Black pellicola) Dear customer, Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. Transport damages When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre.
132990210.
132990210.qxd 20/02/2004 15:17 Pagina 4 (Nero/Process Black pellicola) Warnings The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. Installation • All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed.
20/02/2004 15:17 Pagina 5 (Nero/Process Black pellicola) Child safety • Children are often not aware of how dangerous electrical appliances can be. When the machine is working, children should be carefully supervised and not be allowed to play with the appliance. • Keep all detergents in a safe place out of children’s reach. • The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach.
132990210.qxd 20/02/2004 15:17 Pagina 6 (Nero/Process Black pellicola) Technical specifications DIMENSIONS Height Width Depth 85 cm 60 cm 54 cm MAXIMUM LOAD Cotton Synthetics Delicates Woollens 5 kg 2 kg 2 kg 1 kg SPIN SPEED 500 rpm max.
132990210.qxd 20/02/2004 15:17 Pagina 7 (Nero/Process Black pellicola) 6. Set the machine upright and remove the remaining rear screw. Slide out the relevant pin. Unpacking All transit bolts and packing must be removed before using the appliance. 7. Plug all the holes with the plugs which you will find in the envelope containing the instruction booklet. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1.
132990210.qxd 20/02/2004 15:17 Pagina 8 (Nero/Process Black pellicola) The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use. Electrical connection This machine is designed to operate on a 220-230 V, single-phase, 50 Hz supply. Check that your domestic electrical installation can take the maximum load required (2.25 kW), also taking into account any other appliances in use.
132990210.qxd 20/02/2004 15:17 Pagina 9 (Nero/Process Black pellicola) This new machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. • The temperature selector dial will allow you to choose the most suitable temperature for your laundry. • The automatic cooling of the washing water from 95° to 60°C before draining will prevent old drain pipes from being deformed.
132990210.
20/02/2004 15:17 Pagina 11 (Nero/Process Black pellicola) Washing hints ENGLISH 132990210.qxd Laundry weights The following weights are indicative: Sorting the laundry bathrobe Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens.
132990210.qxd 20/02/2004 15:17 Pagina 12 (Nero/Process Black pellicola) Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Treat any residual marks with bleach. Quantity of detergent to be used The type and quantity of detergent will depend on the type of fabric, load size, degree of soiling and hardness of the water used.
20/02/2004 15:17 Pagina 13 (Nero/Process Black pellicola) International wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash 95 60 40 30 Max. wash temperature 95°C Max. wash temperature 60°C Max. wash temperature 40°C Max.
132990210.qxd 20/02/2004 15:17 Pagina 14 (Nero/Process Black pellicola) Operating sequence 4. Select option “HALF LOAD” if desired Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine. 5. Select the temperature Turn the dial to the required setting. 1.
20/02/2004 15:17 Pagina 15 (Nero/Process Black pellicola) ENGLISH 132990210.qxd 7. At the end of the programme The machine stops automatically. The mains on light goes out. If you have selected a programme which ends with the water of the last rinse left in the tub, drain the water before opening the door selecting programme or . Wait one or two minutes before opening the door to give the electric locking mechanism time to release it. Depress the ON OFF button again to switch the machine off.
132990210.qxd 20/02/2004 15:17 Pagina 16 (Nero/Process Black pellicola) Programme table Washing programmes for cotton and linen Max. load: 5 kg Progr. Temp.
132990210.qxd 20/02/2004 15:17 Pagina 17 (Nero/Process Black pellicola) Washing programmes for synthetics, mixed fabrics, delicates and wool Max. load: 2 kg, wool 1 kg Progr. Temp.
132990210.qxd 20/02/2004 15:17 Pagina 18 (Nero/Process Black pellicola) Maintenance Bodywork Detergent can also accumulate inside the drawer recess: clean it with an old toothbrush. Refit the drawer after cleaning. Clean the outside of the machine with soap and water only. Rinse with clean water and dry with a soft cloth. Important: do not use methylated spirits, solvents or similar products to clean the bodywork.
20/02/2004 15:17 Pagina 19 (Nero/Process Black pellicola) Water inlet filter Frost precautions If you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked. If the machine is installed in a place where the temperature could drop below 0°C, proceed as follows: Turn off the water tap. • Close the water tap and unscrew the water inlet hose from the tap. Unscrew the hose from the tap.
132990210.qxd 20/02/2004 15:17 Pagina 20 (Nero/Process Black pellicola) Something not working? Problems which you can resolve yourself. Problem Possible cause • The door is not firmly closed. • The machine does not start up: • The machine is not plugged in or there is no power at the socket. • The main fuse has blown. • The programme selector dial is not positioned correctly and the ON OFF button has not been depressed. • The water tap is closed.
20/02/2004 15:17 Pagina 21 (Nero/Process Black pellicola) Problem Possible cause • The machine, which is the result of modern technology, runs in a very economical way with low water consumption. Performance is nevertheless excellent. • Water is not visible in the machine: If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information. Mod.
132990210.
