EN User manual Washing Machine ZWH 7126 X
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ 4 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Care and cleani
• Do not change the specification of this appliance. • Obey the maximum load volume of 7 kg (refer to the “Programme chart” chapter). • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • The operating water pressure (minimum and maximum) must be between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa) • The ventilation openings in the base (if applicable) must not be obstructed by a carpet.
Water connection • Make sure not to cause damage to the water hoses. • The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. • Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean. • The first time you use the appliance, make sure that there is no leakage. Use Warning! Risk of injury, electrical shock, fire, burns or damage to the appliance.
Product description 1 2 3 4 When you activate this device, you cannot close the door. This prevents children or pets to be closed in the drum. 5 6 7 1 Worktop 2 Detergent dispenser 3 Control panel 4 Door handle 5 Rating plate 6 Drain pump filter 7 Feet for the appliance level Child safety device To activate the device, turn it clockwise, until the groove is horizontal. To deactivate the device, turn it counter-clockwise, until the groove is vertical. www.zanussi.
Control panel 1 2 3 4 1200 900 700 500 10 1 Programme knob 2 Display 3 Delay start button 4 Door locked indicator 5 Start/pause button 6 Extra rinse button 9 8 7 6 5 8 Prewash button : 9 Options button – ECO option – SUPER QUICK option 10 Spin reduction button – Rinse hold position : 7 Easy Iron button Display The display shows: A B – You change the programme while it operates. Spin button With this button you can decrease the spin speed. The indicator of the set speed comes on.
Use this option for items with light soil or items to refresh. Prewash button The appliance performs a prewash cycle before the main wash. We recommend that you use this function when you have laundry with a high level of soil. The set of this function increases the programme duration. Easy Iron button The laundry is gently washed and spun to avoid creases. In this way ironing is easier. On cotton programmes the appliance reduces the maximum spin speed and performs additional rinses in some programmes.
Programme Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Detergent Compartment SYNTHETICS 60° (Cold) Main wash - Rinses - Spin Maximum spin speed at 900 rpm Max. load 3.5 kg Synthetic or mixed fabrics: underwear, coloured garments, non-shrink shirts, blouses. 2) DELICATES 40° (Cold) Main wash - Rinses - Spin Maximum speed at 700 rpm Max. load kg 3.5 Delicate fabrics: acrylics, viscose, polyester.
Programme Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Detergent Compartment SOAK 30° Prewash - Soak for about 40 minutes - Stop with water in the tub Max. load 7 kg Special programme for laundry with heavy soil. Do not use for very delicate fabrics as silk or wool. Pour the detergent for the soak into the appropriate compartment. At the end of this programme the machine stops automatically with water left in the tub.
According to regulation 1061/2010, the “COTTONS ” with "ECO ” option selected and the “COTTONS ” with "ECO ” option selected are respectively the “standard 60 °C cotton programme” and the “standard 40 °C cotton programme”. They are the most efficient programmes in terms of combined energy and water consumptions for washing normally soiled cotton laundry. The water temperature of the washing phase may differ from the temperature declared for the selected programme.
Programmes Load (Kg) Energy consumption (kWh) Water consumption (litre) Approximate programme duration (minutes) Remaining moisture (%)1) Cottons 60 °C 7 1.30 59 120 53 Cottons 40 °C 7 0.77 60 120 53 Synthetics 40 °C 3.5 0.50 54 80 35 Delicates 40 °C 3.5 0.60 63 65 35 2 0.25 55 60 30 Wool/Hand wash 30 °C Standard cotton programmes Standard 60 °C cotton 7 1.05 49 183 53 Standard 60 °C cotton 3.5 0.70 40 155 53 Standard 40 °C cotton 3.5 0.
Caution! Make sure that no laundry stays between the seal and the door. There is a risk of water leakage or damage to the laundry. Using detergent and additives • Measure out the detergent and the fabric conditioner. • Carefully close the detergent drawer. Detergent compartment for prewash phase. Detergent compartment for washing phase. Compartment for liquid additives (fabric conditioner, starch). Setting a programme 1. Turn the programme knob and set the programme: – The indicator flashes. 2.
3. Press the button continues. again. The programme Opening the door While a programme or the delay start operates, the appliance door is locked. The indicator is on. Caution! If the temperature and level of the water in the drum are too high, you cannot open the door. Open the appliance door when the delay start operates: to pause the appli1. Press the button ance. 2. Wait until the door lock indicator goes off. 3. You can open the door. 4. Close the door and press the button again.
• If your appliance has not the detergent dispenser with the flap device, add the liquid detergents with a dosing ball. Water hardness If the water hardness in your area is high or moderate, we recommend that you use a water softener for washing machines. In areas where the water hardness is soft it is not necessary to use a water softener. To know the water hardness in your area, contact your local water authority. Obey the instructions that you find on the packaging of the products.
Cleaning the inlet hose filter and the valve filter It could be necessary to clean the filters when: • The appliance does not fill with water. • The appliance fills with the water for a long time. • The indicator of button flashes and the display shows the related alarm. Refer to 'Troubleshooting'. 2. Do not remove the filter while the appliance operates. Do not clean the drain pump if the water in the appliance is hot. The water must be cold before you clean the drain pump. 1.
Emergency drain Because of a malfunction, the appliance cannot drain the water. If this occurs, do steps (1) through (8) of 'Cleaning the drain filter'. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate again the drain system: 1. Put 2 litres of water in the main wash compartment of the detergent dispenser. 2. Start the programme to drain the water. 5. 6. 7. 1 2 8.
• - The appliance door is open or not closed correctly. Please check the door! • - The mains supply is unstable. Wait until the mains supply is stable. Problem The programme does not start. Warning! Deactivate the appliance before you do the checks. Possible solution Make sure that the mains plug is connected to the mains socket. Make sure that the appliance door is closed. Make sure that there is not a damaged fuse in the fuse box. Make sure that the Start/Pause has been pressed.
Problem Possible solution Set the drain or the spin programme if there is water in the drum. The appliance makes an unusual noise. Make sure the levelling of the appliance is correct. Refer to 'Installation'. Make sure that the packaging and/or the transit bolts are removed. Refer to 'Installation'. Add more laundry in the drum. The load may be too small. The appliance fills with water and drain immediately. Make sure that the drain hose is in the correct position. The hose may be too low.
www.zanussi.
132910400-A-362013 www.zanussi.