User manual

Economy
Only for cottons and synthetic items lightly or
normally soiled at a temperature of 40°C or
higher. The washing time will be prolonged and
the washing temperature will be reduced. You
can use this option if you want to wash normally
soiled laundry and at the same time save ener-
gy.
Prewash
By selecting this option the machine performs a
prewash cycle before the main wash phase. The
washing time will be prolonged. This option is
recommended for heavily soiled laundry.
Easy Iron
By selecting this option the laundry is gently
washed and spun to avoid any creasing. In this
way ironing is easier. Furthermore the machine
will perform some additional rinses in some pro-
grammes. On cotton programmes the maximum
spin speed is reduced automatically.
Extra Rinse
This appliance is designed to save energy. If it
necessary to rinse the laundry using an extra
quantity of water (extra rinse), select this option.
Some additional rinses will be performed. This
option is recommended for people who are al-
lergic to detergents, and in areas where the wa-
ter is very soft.
Start Pause
This button allows you to start or to interrupt the
selected programme.
Delay Start
The programme can be delayed from 30 min -
60 min - 90 min, 2 hours and then by 1 hour up
to a maximum of 20 hours by means of this but-
ton.
Door locked pilot light
The pilot light 9 illuminates when the pro-
gramme starts and indicates if the door can be
opened:
light on: the door cannot be opened. The ma-
chine is working or has stopped with water
left in the tub.
light off: the door can be opened. The pro-
gramme is finished or the water has been
emptied out.
light blinking: the door is opening in a few mi-
nutes.
Display (10)
10.1 10.2
The display shows the following information:
10.1: Child safety lock
This device permits you to leave the appliance
unattended during it's functioning.
10.2:
Duration of the selected programme
After selecting a programme, the duration is
displayed in hours and minutes (for example
). The duration is calculated automati-
cally on the basis of the maximum recommen-
ded load for each type of fabric. After the
programme has started, the time remaining is
updated every minute.
Delayed start
The Selected delay set by pressing the rele-
vant button appears on the display for a few
seconds, then the duration of the selected
programme is displayed again. The delay time
value decreases by one unit every hour and
then, when 1 hour remains, every minute.
Alarm codes
In the event of operating problems, some
alarm codes can be displayed, for example
(see paragraph «What to do if...»).
Incorrect option selection
If an option which is not compatible with the
set wash programme is selected, the mes-
sage Err is displayed at the bottom of the
display for a few seconds. The integrated red
light of button 7 starts flashing.
7
www.zanussi.com