EN User manual Washing Machine ZWG 660 E
Contents Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ 7 Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ 10 First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 12 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Technical data _ _ _ _ _ _
• All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in the user manual. • After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable against the wall. • If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely under the appliance.
Product description 1 2 3 4 5 6 1 Detergent dispenser drawer 2 Control panel 4 Rating Plate 5 Drain pump 3 Door opening handle 6 Adjustable feet Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain remover used during the stain action phase (if available). The prewash and soak detergent is added at the beginning of the wash programme. The stain remover is added during the stain action phase. Compartment for powder or liquid detergent used for main wash.
Control panel Below is a picture of the control panel. It shows the programme selector dial as well as the buttons and the pilot lights. These are presented by relevant numbers on the following pages.
Rinse hold By selecting this function the water of the last rinse is not emptied out to prevent the fabrics from creasing. Before opening the door it will be necessary to empty out the water. To empty out the water, please read the paragraph «At the end of the programme». Easy Iron By selecting this option the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier. Furthermore the machine will perform some additional rinses in some programmes.
Washing programmes Programme Maximum and Minimum Temperature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry COTTON 90° - 60° Main wash - Rinses Maximum spin speed at 600 rpm Max. load 6 kg - Reduced load 3 kg White cotton (heavily or normally soiled items). Options SPIN NO SPIN NIGHT CYCLE RINSE HOLD EASY IRON DAILY SUPER QUICK1) EXTRA RINSE COTTON ECO2) 60° Main wash - Rinses Maximum spin speed at 600 rpm Max. load 6 kg White or fast colour cotton (normally soiled items).
Programme Maximum and Minimum Temperature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Detergent Compartment COTTON + PREWASH 90° Prewash - Main wash - Rinses Maximum spin speed at 600 rpm Max. load 6 kg - Reduced load 3 kg This programme can be selected for heavily soiled cotton with prewash phase. SPIN NO SPIN NIGHT CYCLE RINSE HOLD EASY IRON DAILY SUPER QUICK1) EXTRA RINSE 3) COTTON + PREWASH 60° Prewash - Main wash - Rinses Maximum spin speed at 600 rpm Max.
Programme Maximum and Minimum Temperature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry RINSES Rinses Maximum spin speed at 600 rpm Max. load 6 kg With this programme it is possible to rinse and spin cotton garments which have been washed by hand. The machine performs additional rinses, followed by a final long spin. The spin speed can be reduced. Options Detergent Compartment SPIN NO SPIN NIGHT CYCLE RINSE HOLD EASY IRON EXTRA RINSE DRAIN Draining of water Max.
Programmes1) Load (kg) Energy consumption (kWh) Water consumption (litre) Approximate programme duration (minutes) Remaining moisture (%)2) Cottons 60 °C 6 1.3 58 125 77 Cottons 40 °C 6 0.7 58 120 77 Synthetics 40 °C 3 0.5 45 95 37 Delicates 40 °C 3 0.55 60 65 37 Wool/Hand wash 30 °C 2 0.25 53 55 37 Standard cotton programmes1) Standard 60 °C cotton 6 0.90 54 175 77 Standard 60 °C cotton 3 0.68 35 150 77 Standard 40 °C cotton 3 0.
• Synthetics: drum no more than half full; • Delicate fabrics and woollens: drum no more than one third full. Washing a maximum load makes the most efficient use of water and energy. For heavily soiled laundry, reduce the load size. Removing stains Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing. Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water.
medium or high we suggest you to add a water softener following always the manufacturer’s instructions. When the degree of hardness is soft, readjust the quantity of the detergent. First use • Ensure that the electrical and water connections comply with the installation instructions. • Remove the polystyrene block and any material from the drum. • Pour 2 litres of water into the main of the detergent wash compartment drawer in order to activate the ECO valve.
Caution! If you turn the programme selector dial to another programme when the machine is working, the red pilot light of button 5 will blink 3 times to indicate a wrong selection. The machine will not perform the new selected programme. Reduce the spin speed by pressing button 2 By selecting a programme, the appliance proposes automatically the maximum spin speed provided for that programme. Press button 2 repeatedly to change the spin speed, if you want your laundry to be spun at a different speed.
Changing a running programme is possible only by resetting it. Turn the programme selector and then to the new programme podial to sition. Start the new programme by pressing the button 5 again. The washing water in the tub will be not emptied out. Interrupting a programme Press the button 5 to interrupt a programme which is running, the corresponding green pilot light starts blinking. Press the button again to restart the programme.
Open the pump door. Remove the drawer by pressing the catch downwards and by pulling it out. Flush it out under a tap, to remove any traces of accumulated powder. To aid cleaning, the top part of the additive compartment should be removed. Place a container close to the pump . Unscrew carefully the drain filter to drain out the water.
Replace the filter into the pump by inserting it correctly into the special guides. Screw firmly the filter. Close the pump door. Caution! When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the filter during a wash cycle. Always wait until the appliance has finished the cycle, and is empty. When refitting the filter, ensure it is securely re-tightened so as to stop leaks and young children being able to remove it.
Emergency emptying out If the water is not discharged, proceed as follows to empty out the machine: 1. Pull out the plug from the power socket. 2. Close the water tap. 3. If necessary, wait until the water has cooled down. 4. Open the pump door. 5. Place a bowl on the floor. 6. Unscrew carefully the filter. When the bowl is full, screw the filter again. – The water drain out by gravity into the bowl. 7. 8. – Empty the bowl. – Repeat the procedure until water stops flowing out.
Problem Possible cause/Solution The washing machine does not start: The door has not been closed (the button 5 red light blinks). • Close the door firmly. The plug is not properly inserted in the power socket. • Insert the plug into the power socket. There is no power at the socket. • Please check your domestic electrical installation. The main fuse has blown. • Replace the fuse. The programme selector dial is not correctly positioned and the button 5 has not been pressed.
Problem Possible cause/Solution Unsatisfactory washing results: Too little detergent or unsuitable detergent has been used. • Increase the detergent quantity or use another one. Stubborn stains have not been treated prior to washing. • Use commercial products to treat the stubborn stains. The correct temperature was not selected. • Check if you have selected the correct temperature. Excessive laundry load. • Reduce the laundry load. The door will not open: The programme is still running.
Mod Prod . ... . No. ... ... ... ... .. Ser. No. ... ... ... If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information. Mod. ... ... ... Prod. No. ... ... ... Ser. No. ... ... ... Technical data Dimensions Width Height Depth Depth (Overall dimensions) 60 cm 85 cm 55.3 cm 64.
A Unscrew the three bolts A . Any necessary adjustment can be made with a spanner. B Slide out the relevant plastic spacers B . Accurate levelling prevents vibration, noise and displacement of the machine during operation. Caution! Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. After having levelled the appliance, tighten the lock nuts. Open the porthole and remove the polystyrene block fitted on the door seal.
Connect the hose to a tap with a 3/4” thread. Always use the hose supplied with the appliance. Hooked over the edge of a sink using the plastic hose guide. In this case, make sure the end cannot come unhooked when the machine is emptying. This could be done by tying it to the tap with a piece of string or attaching it to the wall. 35° 45° The other end of the inlet hose which connects to the appliance can be turned as showed in the picture. Do not place the inlet hose downwards.
Caution! Should the appliance power supply cable need to be replaced, this must be carried out by a Service Centre. Environment concerns Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
148203790-A-262013 www.zanussi.
