EN User manual Washing Machine ZWG 6148K
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ Product description _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ 2 3 4 5 6 6 7 Options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Hints and tips
General Safety • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Do not change the specification of this appliance. • Obey the maximum load volume of 6 kg (refer to the “Programme chart” chapter). • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
that there is access to the mains plug after the installation. • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. • Do not touch the mains cable or the mains plug with wet hands. • Only for UK and Ireland. The appliance has a 13 amp mains plug. If it is necessary to change the fuse in the mains plug, use a 13 amp ASTA (BS 1362) fuse. • • Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
household waste disposal service or the shop where you purchased the product. Packaging materials . Recycle the materials with the symbol Put the packaging in applicable containers to recycle it. Ecological hints To help the environment, use less water and energy, obey these instructions: • Set a programme without the prewash phase to wash laundry with normal soil. • Always start a washing programme with the maximum load of laundry.
Control panel 1 2 3 Delay Start 3h 6h 9h 90° 60° 40° Washing 30° Extra Rinse End Temp. Spin 7 6 Super Quick Start / Pause 5 4 1 Programme knob 2 Delay start button (Delay Start) 4 Start/pause button (Start/Pause) 5 Super quick button (Super Quick) 3 Programme phase indicators: – Washing indicator – Extra Rinse indicator – End indicator and Rinse 6 Automatic spin reduction button hold 7 Temperature button (Temp.
Programme Temperature range Type of load and soil Maximum load, Maximum spin Drain To drain the water in the drum. All fabrics. 6 kg Spin To spin the laundry and to drain the water in the drum. All fabrics. 6 kg, 1400 rpm Easy iron 60 °C - Cold Synthetic fabric items. Normal soil. It prevents the laundry creases. 1 kg, 900 rpm Refresh 20 30 °C A very short cycle for synthetic and mixed fabric items. Light soil and items to freshen up. For 5 - 6 shirts.
Programmes Load (Kg) Energy consumption (kWh) Water consumption (litre) Approximate programme duration (minutes) Remaining moisture (%)1) Standard 60 °C cotton 6 1.00 46 188 52 Standard 60 °C cotton 3 0.79 35 175 52 Standard 40 °C cotton 3 0.60 24 169 52 1) At the end of spin phase. Off Mode (W) Left On Mode (W) 0.48 0.48 The information given in the charts above are in compliance with the EU Commission regulation 1015/2010 implementing directive 2009/125/EC.
Set this function to decrease the spin seed to a half, but not less than 400 rpm. Rinse hold Set this function to prevent the laundry creases. There is a water in the drum when the programme is completed. Super quick button (Super Quick) Press this button to decrease the programme duration. Set this function for items with light soil or items to refresh. Extra Rinse Press the button “Spin” and together the button “Super Quick” for some seconds to add the rinsing phase to a programme.
The detergent compartment for the washing phase. If you use a liquid detergent, put it immediately before you start the programme. Liquid additives compartment (fabric conditioner, starch). Put the product in the compartment before you start the programme. – – – – When you use the liquid detergent: Do not use gelatinous or thick liquid detergents. Do not put more liquid then 120 ml. Do not set the prewash phase. Do not set the delay start. Flap for powder or liquid detergent.
• Press the Start/Pause button : The appliance starts the countdown. When the countdown is completed, the programme starts automatically. You can change or cancel the delay start before you press the Start button. After pressing the Start button you can only cancel the delay. To cancel the delay start: 1. Press the Start/Pause button to set the appliance to PAUSE. 2. Press the Delay Start button one time, the indicator of the set delay goes off. 3.
– You can open the door. 4. Turn the programme knob to vate the appliance. to deacti- Stand by Some minutes after the end of the washing programme, if you do not deactivate the appliance, the energy saving status activates. The energy saving status decreases the energy consumption when the appliance is on the standby. • All indicators go off. • The indicator of button Start flashes slowly Press one of the buttons to deactivate the energy saving status.
Care and cleaning External cleaning Clean the appliance only with soap and warm water. Fully dry all the surfaces. Door seal Regularly examine the seal and remove all objects from the inner part. Caution! Do not use alcohol, solvents or chemical products. Descaling The water we use contains limescale. If it becomes necessary, use a water softener to remove limescales. Use a special product made for washing machines. Obey the instructions that you find on the packaging of the manufacturer.
1. 2. 1 2 3 5. 3. 4. 6. 20° 45° Frost precautions If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. 1. 2. 3. 4. Put the ends of the drain and inlet hose in a container. Let the water flow out of the hoses. When no more water flows, install the inlet hose and the drain hose again. Warning! Make sure that the temperature is more than 0 °C before you use the appliance again.
Problem Possible solution Make sure that the appliance door is closed. Make sure that there is not a damaged fuse in the household fuse box. Make sure that the button Start/Pause has been pressed. If the delay start is set, cancel the setting or wait for the end of the countdown. Make sure that the programme knob is in the correct position. Deactivate the Child Lock function if it is on. The appliance does not fill with water. Make sure that the water tap is opened.
Problem Possible solution Make sure that the packaging and/or the transit bolts are removed. Refer to 'Installation instruction'. Add more laundry in the drum. The load may be too small. The appliance fills with water and drain immediately. Make sure that the drain hose is in the correct position. The end of the hose may be is too low. Refer to 'Installation instruction'. The washing results are not satisfactory. Increase the detergent quantity or use a different detergent.
www.zanussi.
www.zanussi.
www.zanussi.
192979530-A-502012 www.zanussi.
