User Manual GETTING STARTED? EASY.
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
• • • • • • • • • Do not exceed the maximum load of 10 kg (refer to the "Programme chart" chapter). The operating water pressure at the water entry point from the outlet connection must be between 0.5 bar (0.05 MPa) and 8 bar (0.8 MPa). The ventilation opening in the base must not be covered by a carpet, mat, or any floor covering. The appliance must be connected to the water mains using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre.
ELECTRICAL CONNECTION USE WARNING! Risk of injury, electric shock, fire, burns or damage to the appliance. WARNING! Risk of fire and electric shock. • • • • • • • • • The appliance must be earthed. Always use a correctly installed shockproof socket. Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. Do not use multi-plug adapters and extension cables. Make sure not to cause damage to the mains plug and to the mains cable.
PRODUCT DESCRIPTION APPLIANCE OVERVIEW 1 2 1 Worktop 2 Detergent dispenser 3 3 Control panel 4 Door handle 5 Rating plate 6 Feet for levelling the appliance 4 5 6 FIXING PLATE KIT (4055171146) Available from your authorised dealer. If you install the appliance on a plinth, secure the appliance in the fixing plates. Read carefully the instructions supplied with the accessory.
EASY START SPECIAL FEATURES Your new washing machine meets all modern requirements for an effective treatment of laundry with low water, energy and detergent consumption and will care for fabrics. This appliance is designed with a self cleaning draining system, allowing light fluff fibers that fall off the clothes to be drained out with the water, in such a way that there is no need to access this area for regular maintenance and cleaning.
DISPLAY A B C D G F A. The Temperature area: : Temperature indicator : Cold water indicator : The spin speed indicator • : The No Spin indicator • E. : The alarm codes • : The message of error • • : The Rinse Hold indicator • : The Extra Silent indicator D. The time area: • • • B. : The permanent extra rinse indicator C. The spin area: • E : Programme is completed. : The door locked indicator You cannot open the appliance door when the symbol is on.
Programme Temperature range Maximum load Reference spin speed Programme description (Type of load and soil level) 10 kg 1400 rpm White cotton and fast-coloured cotton. Normal soil. The energy consumption decreases and the time of the washing programme is extended, ensuring good washing results. Synthetics 60°C - Cold 4 kg 1200 rpm Synthetic items or mixed fabric items. Normal soil.
■ ■ Wool/ Handwash ■ ■ ■ ■ Refresh 20 min ■ ■ ■ Mixed Fabrics ■ ■ ■ ■ ■ Easy Iron ■ ■ ■ Drain & Spin ■ Rinse Only ■ Intensive Delicates Quick1) Programme ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 1) When you set this option, we recommend that you decrease the quantity of the laundry. It is possible to keep the full load but the washing results can be unsatisfactory. Recommended load: cotton: 5 kg, synthetics and delicates: 2,5 kg.
Programmes Load (kg) Energy consumption (kWh) Water consumption (litre) Approximate Remaining programme duration (mi- moisture (%)1) nutes) Cottons 40°C 10 1,40 83 210 52 Synthetics 40°C 4 0,80 61 140 35 Delicates 40°C 4 0,56 75 95 35 1,5 0,42 62 75 30 10 0.93 57 246 52 5 0,70 45 206 52 5 0,65 46 203 52 Wool/Handwash2) 30°C Standard cotton programmes Standard 60°C cotton Standard 60°C cotton Standard 40°C cotton 1) At the end of spin phase.
• The door stays locked. You must drain the water to unlock the door. • The display shows the indicator . To drain the water refer to ‘At the end of the programme’. Extra Silent • Set this option to remove all spin phases and to perform a silent washing. • The rinse phase uses more water for some washing programmes. • The washing programme stops with the water in the drum. The drum turns regularly to prevent the laundry creases. • The door stays locked. You must drain the water to unlock the door.
Activate this option after you touch the button the buttons are locked (except for the button : ). This option stays active even when you switch off the appliance. • The programme is completed. • The appliance has a malfunction. To deactivate/activate the acoustic signals, touch the buttons seconds. and at the same time for 4 If you deactivate the acoustic signals, they continue operate when the appliance has a malfunction.
LIQUID OR POWDER DETERGENT The default position of the flap is A (powder deA tergent). CAUTION! Make sure that no laundry stays between the seal and the door. There is a risk of water leakage or damage to the laundry. To use liquid detergent: 1. Remove the drawer. Push the drawer edge in the place with the arrow (PUSH) to remove the drawer easily. Washing heavily oiled, greasy stains could cause damage rubber parts of the washing machine. USING DETERGENT AND ADDITIVES 1.
SETTING A PROGRAMME 1. Touch the programme button programme: and set the • The indicator of the button flashes. • The display shows the programme duration. 2. If necessary, change the temperature and the spin speed or add available options. When you activate an option, the indicator of the set option comes on. If you set something incorrect, the display shows the message OPTION Touch the button • • • . indicator is on. The drain pump can operate for a short time at the beginning of the washing cycle.
OPENING THE DOOR While a programme (or the ) operates, the appliance door is locked. The indicator is on. • You must drain the water to open the door. Draining the water: 1. To drain the water. CAUTION! If the temperature and level of the water in the drum are too high, you cannot open the door. To open the door during the first minutes of the cycle (or when the 1. Touch the button operates) : goes off. 4. Close the door and touch the button The programme (or the ) continues.
• • • Be careful with the curtains. Remove the hooks and put the curtains in a washing bag or pillowcase. Do not wash laundry without hems or with cuts. Use a washing bag to wash small and/or delicate items (e.g. underwired bras, belts, tights, etc. ). A very small load can cause balance problems with the spin phase. If this occurs, adjust manually the items in the tub and start the spin phase again. • • • • To help the environment, do not use more than the correct quantity of detergent.
such a way that there is no need to access this area for regular maintenance and cleaning. Regularly examine the seal and remove all objects from the inner part. Coins, buttons, other small items forgotten in the pockets of your clothes are deposited during the washing cycle in the special double lip trap in the porthole seal, where they can be conveniently recovered at the end of the cycle.
5. When no more water flows, install the inlet hose and the drain hose again. WARNING! Make sure that the temperature is more than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. TROUBLESHOOTING WARNING! Refer to Safety chapters. INTRODUCTION The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the table). If the problem persists, contact the Authorised Service Centre.
POSSIBLE FAILURES Problem The programme does not start. Possible solution • • • • • • The appliance does not fill with water properly. • • • • • • The appliance does not drain the water. • • • • • • The spin phase does not operate or the washing cycle lasts longer than usually. • • • • There is water on the floor. • • • Make sure that the mains plug is connected to the mains socket. Make sure that the appliance door is closed. Make sure that there is not a damaged fuse in the fuse box.
Problem Possible solution The appliance fills with water and drain immediately. • Make sure that the drain hose is in the correct position. The end of the hose may be too low. Refer to 'Installation instruction'. The cycle is shorter than the time displayed. • The appliance calculates a new time according to the laundry load. See the ‘Consumption Values’ chapter. The cycle is longer than the time displayed. • An unbalanced laundry load increases the duration time.
PRODUCT INFORMATION SHEET IN REFERENCE TO E.U. REGULATION 1369/2017 Product Information Sheet Trade Mark Model Rated capacity in kg Energy efficiency class ZANUSSI ZWF01487W, PNC914910605 10 A+++ -20% Energy consumption in kWh per year, based on 220 standard washing cycles for cotton programmes at 60 °C and 40 °C at full and partial load, and the consumption of the low-power modes. Actual energy consumption will depend on how the appliance is used.
Airborne acoustical noise emission in db(A) spinning 78 Built in appliance Y/N No The information given in the chart above is compliant with the EU Commission regulation 1015/2010 implementing directive 2009/125/EC . ENVIRONMENTAL CONCERNS with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office. Recycle materials with the symbol . Put the packaging in relevant containers to recycle it.
192957962-A-312018 WWW.ZANUSSI.