User Manual GETTING STARTED? EASY.
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
• • • • • Old hose sets must not be reused. If the mains power supply cable is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam to clean the appliance. Clean the appliance with a moist cloth. Use only neutral, detergents.
• • • • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. Make sure that all metal objects are removed from the laundry. Do not put a container to collect possible water leakage under the appliance. Contact the Authorised Service Centre to ensure which accessories can be used. Do not touch the glass door while a programme is in operation. The glass can get hot. SERVICE • To repair the appliance contact an Authorised Service Centre.
CONTROL PANEL CONTROL PANEL DESCRIPTION Cottons Cotton ECO Synthetics Delicates Wool/Handwash Duvets Mix 20° 1400 Quick 60° 1200 Intensive 40° 800 Easy Iron Finish In Rinse Only 30° Drain & Spin P On/Off 1 1 On / Off button 90° 2 3 4 5 6 7 8 9 6 Start/Pause touchpad (On/Off) 2 Programme selection touchpad 3 Temperature touchpad 7 Finish in touchpad 8 Display (Finish In) 9 Door locked indicator 4 Spin selection touchpad 5 Options selection touchpad DISPLAY A.
PROGRAMME CHART Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) 30'@30° 30°C 3 kg 800 rpm A short cycle for synthetic and delicate items with light soil level or for items to freshen up. Cottons 90°C - Cold 10 kg 1400 rpm White cotton and coloured cotton. Normal soil and light soil. Cotton 10 kg 1400 rpm White cotton and fast-coloured cotton. Normal soil.
30'@30° ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Cotton Eco ■ ■ ■ ■ Synthetics ■ ■ ■ ■ ■ Delicates ■ ■ ■ ■ ■ Wool/Handwash ■ ■ Mix 20° ■ Drain & Spin ■ Cottons Duvets Rinse Only Programme Easy Iron Quick1) Intensive Programme options compatibility ■ ■ ■ ■ ■ 1) When you set this option, we recommend that you decrease the quantity of the laundry.
Programmes Load (kg) Energy consumption (kWh) Water consumption (litre) Approximate Remaining programme duration (mi- moisture (%)1) nutes) Cottons 40°C 10 1,40 83 210 53 Synthetics 40°C 4 0,80 61 140 35 Delicates 40°C 4 0,56 75 95 35 1,5 0,42 62 75 30 10 1,02 57 252 53 5 0,75 46 205 53 5 0,67 46 205 53 Wool/Handwash 30°C 2) Standard cotton programmes Standard 60°C cotton Standard 60°C cotton Standard 40°C cotton 1) At the end of spin phase.
The related indicator comes on. To drain the water refer to ‘At the end of the programme’. DRAIN & SPIN With this option you can perform the spin and drain cycle. The spin phase is suitable to the washing programme you set. QUICK With this option you can decrease the programme duration. Use this option for items with light soil or items to refresh. The related indicator comes on. If you set also the No Spin option ( INTENSIVE With this option you can wash very soiled laundry.
BEFORE FIRST USE 1. Put a small quantity of detergent in the compartment for washing phase. 2. Set and start a programme for cotton at the highest temperature without laundry. This removes all possible dirt from the drum and the tub. DAILY USE WARNING! Refer to Safety chapters. LOADING THE LAUNDRY Open the water tap. Connect the mains plug to the mains socket. 1. Pull the door handle to open the appliance door. 2. Put the laundry in the drum, one item at a time. 3.
2. Adjust the flap in position B. 3. Put back the drawer in the recess. B STARTING A PROGRAMME WITHOUT THE FINISH IN Touch the button • • • When you use the liquid detergent: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid then 120 ml. • Do not set the delay start. A • • • When the flap is in position B and you want to use powder detergent: 1. Remove the drawer. 2. Adjust the flap in position A. 3. Put back the drawer in the recess.
1. Touch . The indicator of this button flashes. 2. Change the options. If you change any option the Finish In option (if set) will be disabled. 3. Touch again. The programme continues. CANCELLING A PROGRAMME 1. Press the button for some seconds to cancel the programme and to deactivate the appliance. 2. Press the same button again to activate the appliance. Now, you can set a new washing programme. • Keep the door and the detergent drawer ajar, to prevent the mildew and odours.
HINTS AND TIPS THE LAUNDRY LOAD • Divide the laundry in: white, coloured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash white and coloured items together. • Some coloured items can discolour with the first wash. We recommend that you wash them separately for the first times. • Button up pillowcases, close zippers, hooks and poppers. Tie up belts. • Empty the pockets and unfold the items.
Regularly examine the drum to prevent limescale and rust particles. To remove rust particles use only special products for washing machines. Do this separately from the laundry wash. • Select the cotton programme with the highest temperature with a small quantity of detergent. DOOR SEAL Regularly examine the seal and remove all objects from the inner part. Always obey the instructions that you find on the packaging of the product.
3. Remove the drain hose from the rear support and unhook it from sink or spigot. 4. Put the ends of the drain and inlet hose in a container. Let the water flow out of the hoses. 5. When no more water flows, install the inlet hose and the drain hose again. WARNING! Make sure that the temperature is more than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. TROUBLESHOOTING WARNING! Refer to Safety chapters.
POSSIBLE FAILURES Problem The programme does not start. Possible solution • • • • • • The appliance does not fill with water properly. • • • • • • The appliance does not drain the water. • • • • • • The spin phase does not operate or the washing cycle lasts longer than usually. • • • • • There is water on the floor. • • • Make sure that the water tap is open. Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority.
Problem Possible solution The appliance fills with water and drain immediately. • Make sure that the drain hose is in the correct position. The end of the hose may be too low. Refer to 'Installation instruction'. The cycle is shorter than the time displayed. • The appliance calculates a new time according to the laundry load. See the ‘Consumption Values’ chapter. The cycle is longer than the time displayed. • An unbalanced laundry load increases the duration time.
Spin Speed Maximum 1400 rpm 1) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your domestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the appliance inlet hose and the bottom of the water storage tank. 2) Connect the water inlet hose to a water tap with a 3/4'' thread.
192973161-A-492015 WWW.ZANUSSI.