User Manual GETTING STARTED? EASY.
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
• • • • • Old hose sets must not be reused. If the mains power supply cable is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam to clean the appliance. Clean the appliance with a moist cloth. Use only neutral detergents.
• • • • Follow the safety instructions on the detergent packaging. Do not put flammable products or items that are wet with flammable products in, near or on the appliance. Make sure that all metal objects are removed from the laundry. Do not touch the glass door while a programme is in operation. The glass can get hot. SERVICE • To repair the appliance contact an Authorised Service Centre. • Use original spare parts only. DISPOSAL WARNING! Risk of injury or suffocation.
CONTROL PANEL CONTROL PANEL DESCRIPTION Cottons Cotton ECO Synthetics Delicates Wool/Handwash Duvets Mix 20° 90° 1400 Quick 60° 1200 Intensive 40° 800 Easy Iron Finish In Rinse Only 30° Drain & Spin P On/Off 1 2 3 4 5 6 7 8 1 On/Off button 6 Start/Pause touchpad 2 Programmes selection touchpad 7 Finish In touchpad 8 Display 3 Temperature selection touchpad 4 Spin selection touchpad 9 9 Door locked indicator 5 Options selection touchpad DISPLAY A.
PROGRAMME CHART Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) 30'@30° 30°C 3 kg 800 rpm A short cycle for synthetic and delicate items with light soil level or for items to freshen up. Cottons 90°C - Cold 10 kg 1400 rpm White cotton and coloured cotton. Normal soil and light soil. Cotton 10 kg 1400 rpm White cotton and fast-coloured cotton. Normal soil.
■ 30'@30° ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Cotton Eco ■ ■ ■ ■ Synthetics ■ ■ ■ ■ ■ Delicates ■ ■ ■ ■ ■ Wool/Handwash ■ ■ Mix 20° ■ Drain & Spin ■ Cottons Duvets Rinse Only Programme Easy Iron Quick1) Intensive Programme options compatibility ■ ■ ■ ■ ■ 1) When you set this option, we recommend that you decrease the quantity of the laundry.
Programmes Load (kg) Energy consumption (kWh) Water consumption (litre) Approximate Remaining programme duration (mi- moisture (%)1) nutes) Cottons 40°C 10 1,40 83 210 52 Synthetics 40°C 4 0,80 61 140 35 Delicates 40°C 4 0,56 75 95 35 1,5 0,42 62 75 30 10 1,02 57 252 52 5 0,75 46 205 52 5 0,67 46 205 52 Wool/Handwash 30°C 2) Standard cotton programmes Standard 60°C cotton Standard 60°C cotton Standard 40°C cotton 1) At the end of spin phase.
The related indicator comes on. To drain the water refer to ‘At the end of the programme’. DRAIN & SPIN With this option you can perform the spin and drain cycle. The spin phase is suitable to the washing programme you set. QUICK With this option you can decrease the programme duration. Use this option for items with light soil or items to refresh. The related indicator comes on. If you set also the No Spin option ( INTENSIVE With this option you can wash very soiled laundry.
BEFORE FIRST USE 1. Put a small quantity of detergent in the compartment for washing phase. 2. Set and start a programme for cotton at the highest temperature without laundry. This removes all possible dirt from the drum and the tub. DAILY USE WARNING! Refer to Safety chapters. LOADING THE LAUNDRY Open the water tap. Connect the mains plug to the mains socket. 1. Pull the door handle to open the appliance door. 2. Put the laundry in the drum, one item at a time. 3.
2. Adjust the flap in position B. 3. Put back the drawer in the recess. B STARTING A PROGRAMME WITHOUT THE FINISH IN Touch the button • • • When you use the liquid detergent: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid then 120 ml. • Do not set the delay start. A • • • When the flap is in position B and you want to use powder detergent: 1. Remove the drawer. 2. Adjust the flap in position A. 3. Put back the drawer in the recess.
1. Touch . The indicator of this button flashes. 2. Change the options. If you change any option the Finish In option (if set) will be disabled. • The indicator of the button • • • 3. Touch again. The programme continues. The door lock indicator goes off. You can open the door. Remove the laundry from the appliance. Make sure that the drum is empty. • CANCELLING A PROGRAMME 1. Press the button for some seconds to cancel the programme and to deactivate the appliance. 2.
• • • • • • Turn multilayered fabrics, wool and items with painted illustrations inside out. Remove hard stains. Wash heavy soil stains with a special detergent. Be careful with the curtains. Remove the hooks and put the curtains in a washing bag or pillowcase. Do not wash laundry without hems or with cuts. Use a washing bag to wash small and/or delicate items (e.g. underwired bras, belts, tights, etc. ). A very small load can cause balance problems with the spin phase.
DOOR SEAL Regularly examine the seal and remove all objects from the inner part. CLEANING THE DETERGENT DISPENSER 1 2 5 6 3 4 CLEANING THE INLET HOSE AND THE VALVE FILTER 1 1 2 3 4 2 45° 3 20° FROST PRECAUTIONS If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. Do this procedure also when you want to do the emergency drain. 1. Disconnect the mains plug from the mains socket. 14 2.
WARNING! Make sure that the temperature is more than 0°C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. TROUBLESHOOTING WARNING! Refer to Safety chapters. INTRODUCTION The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the table). If the problem persists, contact the Authorised Service Centre.
Problem The appliance does not fill with water properly. Possible solution • • • • • • The appliance does not drain the water. • • • • • • The spin phase does not operate or the washing cycle lasts longer than usually. • • • • There is water on the floor. • • • Make sure that the sink spigot is not clogged. Make sure that the drain hose has no kinks or bends. Make sure that the connection of the drain hose is correct. Set the drain option if you set a programme without drain phase.
Problem The washing results are not satisfactory. You cannot set an option. Possible solution • • • • Increase the detergent quantity or use a different detergent. Use special products to remove the stubborn stains before you wash the laundry. Make sure that you set the correct temperature. Decrease the laundry load. • Make sure that you press only the wanted touch button(s). After the check, activate the appliance. The programme continues from the point of interruption.
the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
192973162-A-212016 WWW.ZANUSSI.