EN User Manual Washing Machine ZWF 91283W ZWF 91483W
Contents Safety information Safety instructions Product description Control panel Programme Chart Consumption values Options 2 3 4 5 6 7 8 Settings Before first use Daily use Hints and tips Care and cleaning Troubleshooting Technical Data 9 10 10 13 14 15 17 Subject to change without notice. Safety information Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages.
• • • • • • The ventilation openings in the base (if applicable) must not be obstructed by a carpet. The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
• The first time you use the appliance, make sure that there is no leakage. Use • WARNING! Risk of injury, electrical shock, fire, burns or damage to the appliance. • • • • • Use this appliance in a household only. Obey the safety instructions on the detergent packaging. Do not put flammable products or items that are wet with flammable products in, near or on the appliance. Make sure that you remove all metal objects from the laundry.
Control panel Control panel description Cottons Cotton ECO Synthetics Delicates Wool/Handwash Duvets Mix 20° 1400 Quick 60° 1200 Intensive 40° 800 Easy Iron Finish In Rinse Only 30° Drain & Spin P On/Off 1 1 On / Off button 90° 2 3 4 5 6 7 8 9 6 Start/Pause touchpad (On/Off) 2 Programme selection touchpad 3 Temperature touchpad 7 Finish in touchpad 8 Display (Finish In) 9 Door locked indicator 4 Spin selection touchpad 5 Options selection touchpad Display A) The time area:
Programme Chart Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) 30' @ 30° 30 °C A short cycle for synthetics and delicate items with light soil level or for items to freshen up. 3 kg 800 rpm for model ZWF 91283W; 800 rpm for model ZWF 91483W Cottons 90 °C - Cold White cotton and coloured cotton. Normal soil and light soil.
Programme options compatibility Programme Quick1) 30' @ 30° Intensive Easy Iron Rinse Only Drain & Spin ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Cottons ■ ■ ■ ■ Cotton Eco ■ ■ ■ ■ Synthetics ■ ■ ■ ■ ■ Delicates ■ ■ ■ ■ ■ Wool/Handwash ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Duvets Mix 20° ■ ■ ■ ■ ■ ■ 1) When you set this option, we recommend that you decrease the quantity of the laundry.
Programmes Load (kg) Wool/Handwash 30 °C 2 Energy consumption (kWh) Water consumption (litre) Approximate programme duration (minutes) Remaining moisture 0,30 63 57 302) / 303) (%)1) Standard cotton programmes Standard 60 °C cotton 9 1,03 49 220 532) / 523) Standard 60 °C cotton 4,5 0,77 40 187 532) / 523) Standard 40 °C cotton 4,5 0,62 40 181 532) / 523) 1) At the end of spin phase. 2) For model ZWF 91283W. 3) For model ZWF 91483W.
The related indicator comes on. The spin phase is suitable to the washing programme you set. Intensive If you set also the No Spin ( ) option, the appliance only drains. With this option you can wash very soiled laundry. The washing cycle lasts longer with this option. The related indicator comes on. Easy Iron The appliance carefully washes and spins the laundry to prevent the creases. The appliance decreases the spin speed, uses more water and adapts the programme duration to the type of laundry.
If you deactivate the acoustic signals, they continue operate when the appliance has a malfunction. Before first use 1. Put a small quantity of detergent in the compartment for washing phase. 2. Set and start a programme for cotton at the highest temperature without laundry. This removes all possible dirt from the drum and the tub. Daily use Using detergent and additives WARNING! Refer to Safety chapters. 1. Measure out the detergent and the fabric conditioner. 2. Carefully close the detergent drawer.
To use liquid detergent: 1. Remove the drawer. Push the drawer edge in the place with the arrow (PUSH) to remove the drawer easily. 2. Adjust the flap in position B. 3. Put back the drawer in the recess. B Setting a programme 1. Touch the programme button programme: and set the • • The indicator of the button flashes. The display shows the programme duration. 2. If necessary, change the temperature and the spin speed or add available options.
To open the door during the first minutes You can cancel or change the set of the Finish In option before you touch the button of the cycle (or when the . After touching the 1. Touch the button appliance. button you can only cancel the Finish In option. a. Touch the button to set the appliance to pause. The indicator of button b. Touch the button until the indicator above this button goes off. Touch the button again to start the programme immediately.
water and spins. If you set , the appliance only drains. 2. When the programme is completed and the door lock indicator open the door. energy consumption. All the indicators and the display go off when : • goes off, you can 3. Press the button for some seconds to deactivate the appliance. The appliance drains and spins automatically after approximately 18 hours (except for Wool programme). You do not use the appliance for 5 minutes before you touch • .
• To use the correct quantity of the detergent, check the water hardness of your domestic system Water hardness If the water hardness in your area is high or moderate, we recommend that you use a water softener for washing machines. In areas where the water hardness is soft it is not necessary to use a water softener. To know the water hardness in your area, contact your local water authority. Use the correct quantity of the water softener.
Cleaning the inlet hose and the valve filter 1 1. Disconnect the mains plug from the mains socket. 2. Remove the water inlet hose. 3. Remove the drain hose from the rear support and unhook it from sink or spigot. 4. Put the ends of the drain and inlet hose in a container. Let the water flow out of the hoses. 2 1 2 3 3 Do this procedure also when you want to do the emergency drain. 4 45° 20° 5. When no more water flows, install the inlet hose and the drain hose again.
Possible failures Problem The programme does not start. Possible solution • • • • • • The appliance does not fill with water properly. • • • • • • The appliance does not drain the water. • • • • • • The spin phase does not operate or the washing cycle lasts longer than usually. • • • • There is water on the floor. • • • Make sure that the mains plug is connected to the mains socket. Make sure that the appliance door is closed. Make sure that there is not a damaged fuse in the fuse box.
Problem Possible solution The appliance fills with water and drain immediately. • Make sure that the drain hose is in the correct position. The end of the hose may be too low. Refer to 'Installation instruction'. The cycle is shorter than the time displayed. • The appliance calculates a new time according to the laundry load. See the ‘Consumption Values’ chapter. The cycle is longer than the time displayed. • An unbalanced laundry load increases the duration time.
Spin Speed Maximum 1200 rpm (ZWF 91283W) 1400 rpm (ZWF 91483W) 1) Connect the water inlet hose to a water tap with a 3/4'' thread. ENVIRONMENTAL CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste.
www.zanussi.
192974690-A-072014 www.zanussi.
