EN User manual Washing Machine ZWF 12380W ZWF 14380W 2
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Personalisation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 4 4 7 7 7 9 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ What to do if ...
• Always be sure, that there is no water leakage from hoses and their connections after the installation. • If the appliance is installed in a location subject to frost, please read the “dangers of freezing” chapter. • Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. • Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Product description 1 2 3 4 5 6 Detergent dispenser drawer Control panel Door opening handle Rating plate Drain pump Adjustable feet 1 2 3 4 5 6 Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain remover used during the stain action phase (if available). The prewash and soak detergent is added at the beginning of the wash programme. The stain remover is added during the stain action phase. Compartment for powder or liquid detergent used for main wash.
1 1 2 3 4 Programme selector dial SPIN reduction button OPTIONS button EXTRA RINSE button 2 3 5 6 7 8 4 5 6 7 8 Display START/PAUSE button DELAY START button Indicator pilot lights Table of symbols Night Cycle Child Safety Lock Rinse Hold Programme selector dial, spin speed button and available options Programme Selector Dial Rinse hold It allows you to switch the appliance on/off and/or to select a programme.
Super Quick 5 Display Short cycle for lightly soiled items or for laundry which needs only freshening up. We recommend you to reduce the fabrics loading. Extra Rinse This appliance is designed for saving energy. If it necessary to rinse the laundry using an extra quantity of water (extra rinse), select this option. Some additional rinses will be performed. This option is recommended for people who are allergic to detergents, and in areas where the water is very soft. 5.2 5.3 5.
• Heating phase During the washing cycle the display shows a temperature icon to indicate that the appliance has started the heating phase of the water in the tub. 5.3: • Child safety lock This device permits you to leave the appliance unattended during it's functioning. First use • Ensure that the electrical and water connections comply with the installation instructions. • Remove the polystyrene block and any material from the drum.
Pull out the dispenser drawer until it stops. Measure out the amount of detergent required, pour it into the main wash compartment or in the appropriate compartment if the selected programme/option it requires (see more details in "Detergent dispenser drawer"). If required, pour fabric softener into the compartment (the amount used must not exceed the marked «MAX» mark in the drawer). Close the drawer gently.
Altering an option or a running programme At the end of the programme It is possible to change some options before the programme carries them out. Before you make any change, you must PAUSE the appliance by pressing the button 6 . Changing a running programme is possible only by resetting it. Turn the programme selector dial to Off and then to the new programme position. Start the new programme by pressing the button 6 again. The washing water in the tub will be not emptied out.
Removing stains Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing. Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water. Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times.
Washing programmes Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Options Detergent drawer Cottons 90° Main wash - Rinses Maximum spin speed 1200 rpm for model ZWF 12380W (1400 for model ZWF 14380W ) Max. load 7 kg - Reduced load 3,5 kg White and fast coloured cotton (heavily or normally soiled items).
Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Synthetics 50° - 40° Main wash - Rinses Maximum spin speed at 900 rpm Max. load 3,5 kg - Reduced load 2 kg Synthetic or mixed fabrics: underwear, coloured garments, non-shrink shirts, blouses. Easy Iron 40° Main wash - Rinses Maximum spin speed at 900 rpm Max. load 1 kg Synthetic or mixed fabrics Selecting this programme the laundry is gently washed and spun to avoid any creasing.
Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Spin Drain and long spin Maximum spin speed 1200 rpm for model ZWF 12380W (1400 for model ZWF 14380W ) Max. load 7 kg Separate spin for hand washed garments and after programmes with the Rinse Hold or Night Cycle option selected. You can reduce the spin speed to the required level by pressing the relevant button to adapt it to the fabrics to be spun.
Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Options Sport Shoes 40° Main wash - Rinses Maximum spin speed at 900 rpm Max. load: 1 pair of shoes With this programme it is possible to wash one pair of sport shoes (or 2 pairs if they are small). The shoes would be gently washed and spun Don't wash your sport shoes together with laundry.
Problem Possible cause/Solution The machine does not start: The door has not been closed. • Close the door firmly. The plug is not properly inserted in the power socket. • Insert the plug into the power socket. There is no power at the socket. • Please check your domestic electrical installation. The main fuse has blown. • Replace the fuse. The selector dial is not correctly positioned and the button 6 has not been pressed. • Please turn the selector dial and press the button 6 again.
Problem Possible cause/Solution There is water on the floor: Too much detergent or unsuitable detergent (creates too much foam) has been used. • Reduce the detergent quantity or use another one. Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp. • Check the water inlet hose connection. The drain or inlet hose is damaged. • Replace it with a new one.
Problem Possible cause/Solution Spinning starts late or the machine does not spin: The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after 10 minutes, the laundry is still not evenly distributed in the drum, the machine will not spin.
Consumption values Programme Energy consumption (KWh) Water consumption (litres) White Cottons 90° 2,2 65 Cottons 60° 1.4 62 Cotton ECO 60° 1) 1,19 52 Cottons 40° 1,2 57 Synthetics 40° 0.5 44 Delicates 40° 0.55 58 Wool/ Handwash 30° 0.25 52 Programme duration (Minutes) For the duration of the programmes, please refer to the display on the control panel.
Replace the drawer and run the rinse programme without any clothes in the drum. Cleaning the pump The pump should be inspected if: • the machine does not empty and/or spin; • the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump. Proceed as follows: • disconnect the appliance; • if necessary wait until the water has cooled down. Open the pump door. Place a container close to the pump to collect any spillage.
• Unscrew the hose from the machine. Keep a rug nearby because some water may flow. • Clean the filter in the valve with a stiff brush or with the piece of cloth. • Screw the water inlet hose back on and reposition the emergency emptying hose after having put the cap on again. • When you intend to start the machine up again, make sure that the room temperature is above 0°C. Emergency emptying out 35° 45° • Screw the hose back to the machine and make sure the connection is tight.
Water inlet Warning! This appliance must be connected to a cold water supply Caution! Before connecting up the appliance to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected Unscrew the three bolts. Slide out the relevant plastic spacers. Caution! Do not use the hose from your previous appliance to connect to water supply. The inlet hose is screwed to the back of the appliance.
Warning! Installation should comply with local water authority and building regulations’ requirements. The appliance must be connected to a cold water supply. A minimum water pressure of 0.05 MPa (0.5 bar) is required for safe operation of the appliance. If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system. There should be a minimum vertical distance of 5.02 m (16.
protrude a few centimetres beyond the edges of the appliance. Warning! The appliance should NOT be placed on deep pile carpeting. Note! Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown. In the interest of the environment The appliance should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treatment before being discharged safely into a river.
for the required load in compliance with the current electrical regulations. The switch must not break the yellow and green earth cable at any point. Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment.
www.zanussi.