EN User manual Ceramic glass hob ZVT860X 2
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Description of the appliance _ _ _ _ _ _ _ _ _ _ _ _ Operating the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 2 5 6 Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 What to do if...
• Product number (Prod. Nr.) ............. .... • Serial number (Ser. Nr.) ............... You find the rating plate of the appliance on its lower casing. ZVT860X 58 HBD 47 A0 220-240 V 50-60-Hz 949 594 006 00 7,0 kW 7,0 kW ZANUSSI Safety instructions Warning! You must read these! Make sure that the appliance is not damaged because of transportation. Do not connect a damaged appliance. If it is necessary, speak to the supplier.
Assembly 600 mm min. 500 mm min. 50 mm min. 50 mm 750+1 mm 490+1 mm R5 min. 25 mm min. 20 mm min.
Description of the appliance Cooking surface layout 1 2 145 265 mm mm 170 1 2 3 4 5 mm 145 120/210 mm mm 5 4 Single cooking zone 1200 W Oval cooking zone 1500/2400 W Single cooking zone 1200 W Control panel Double cooking zone 750/2200 W 3 Control panel layout 1 2 3 10 4 9 5 6 7 8 Use the sensor fields to operate the appliance.
sensor field 10 function starts and stops the outer ring with an indicator Heat setting displays Displays and sounds tell which functions operate Display Description The cooking zone is off The cooking zone operates - Keep Warm function is on The automatic heat-up function is on There is a malfunction A cooking zone is still hot (residual heat) Lock/Child safety function is on The automatic switch off is on Residual heat indicator Warning! Risk of burns from residual heat! Operating the appliance
Do the procedure again to switch off the outer ring. The indicator goes out. The automatic heat up function The automatic heat up function adds more power to the cooking zones and you can get a necessary heat setting in a shorter time. The automatic heat up function starts . A cooking when you set a heat setting starting from zone operates with the maximum power for some time and than automatically switches back to the heat setting you set.
Overriding the child safety device for one cooking session • Start the hob with . The symbol comes on. onds. You can operate the hob. When you stop the hob , the child safety device operates again. with • Touch until the acoustic signal. The symbol comes on. Set the heat setting in less than 10 sec- Helpful hints and tips Cookware • The bottom of the cookware must be as thick and flat as possible.
Information on acrylamides Important! According to the newest scientific knowledge, if you brown food (specially the one which contains starch), acrylamides can pose a health risk. Thus, we recommend that you cook at the lowest temperatures and do not brown food too much. Care and cleaning Clean the appliance after each use. Always use cookware with clean bottom. Warning! Sharp objects and abrasive cleaning agents will damage the appliance.
Problem and a number come on. Possible cause and remedy There is an error in the appliance. Disconnect the appliance from the electrical supply for some time. Disconnect the fuse from the electrical system of the house. Connect again. If comes on again, speak to the after sales service. If you tried the above solutions and cannot repair the problem, speak to your dealer or the Customer Care Department.
www.zanussi.
