EN User manual Ceramic glass hob ZVT64N 2
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Description of the appliance _ _ _ _ _ _ _ _ _ _ _ _ Operating the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 2 5 6 Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ What to do if...
ZVT 64N 58HAD54AO 220-240 V 50-60-Hz 949 593 050 01 6,5 kW 6,5 kW ZANNUSSI Safety instructions Warning! You must read these! Make sure that the appliance is not damaged because of transportation. Do not connect a damaged appliance. If it is necessary, speak to the supplier. Only an authorised service technician can install, connect or repair this appliance. Use only original spare parts.
Assembly 600 mm min. 500 mm min. 50 mm min. 50 mm 490+1 mm 560+1 mm R5 min. 25 mm min. 20 mm min.
Description of the appliance Cooking surface layout 1 2 145 180 mm 1 2 3 4 5 mm 210 145 5 4 3 mm mm Single cooking zone 1200 W Single cooking zone 1800 W Single cooking zone 1200 W Control panel Single cooking zone 2300 W Control panel layout 1 2 3 Use the sensor fields to operate the appliance.
Display Description Lock/Child safety device is on The automatic switch off is active Residual heat indicator Warning! Risk of burns from residual heat! Operating the appliance • you do not set the heat setting after you start the hob. • you cover a sensor field with an object (a pan, a cloth, etc.) for longer than 10 seconds. Remove the object or clean the control panel. • you do not stop a cooking zone or change the heat comes on. setting after some time. See the table.
• The bottom of pans and cooking zones must have the same dimension. Heat setting 1 Use to: Keep cooked foods warm Examples of cooking applications The data in the table is for guidance only.
What to do if... Problem Possible cause and remedy You cannot start the appliance or op- • You touched 2 or more sensor fields at the same time. Only touch one erate it. sensor field. • There is water or fat stains on the control panel. Clean the control panel • The child safety device operates . Stop the function. See the section “Child safety device”. • Start the appliance again and set the heat setting in 10 seconds. The residual heat indicator does not come on.
www.zanussi.com 892931471-B-112009 www.zanussi.