User information Ceramic glass hob ZVH 66 F
Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner of the appliance.
Operating Instructions 1 Safety instructions Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty. Correct use • This appliance is not intended for use by children or other persons whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely.
How to avoid damage to the appliance • The glass ceramic can be damaged by objects falling onto it. • The edge of the glass ceramic can be damaged by being knocked by the cookware. • Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the glass ceramic if pushed across the surface. • Objects that melt and things that boil over can burn onto the glass ceramic and should be removed straightaway.
Control panel layout Cooking zone indicators Timer function Lock with pilot light Display Double ring cooking zone switch with pilot light Heat setting selection Timer display Double ring cooking zone switch with pilot Timer On/Off with power indicator Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals.
Displays Display Description Cooking zone is switched off - Keep warm setting Keep warm setting is set Heat settings Heat setting is set Automatic warm up function Automatic warm-up function is activated Fault Malfunction has occurred Residual heat Cooking zone is still hot Child safety device Lock/child safety device is engaged Automatic switch off Switch off is active. Residual heat indicator 1 Warning! Risk of burns from residual 3 6 heat.
Operating the appliance Switching the appliance on and off Control panel Display Pilot light Switch on Touch for 2 seconds / lights up Switch off Touch for 1 second / none goes out 3 After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off.
Locking/unlocking the control panel The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in order to prevent the settings being changed e.g. by wiping over the panel with a cloth. Control panel Switch on Touch Switch off Touch 3 8 When you switch the appliance off, the locking function is automatically switched off.
Using the automatic warm-up function All cooking zones are equpped with an automatic warm up function When setting a heat Control panel setting using , when starting from , the cooking zone switches to full power for a certain amount of time and then automatically switches back to the heat setting set.
Using the child safety device The child safety device prevents unintentional use of the appliance. Switching on the child safety device Step Control panel 1. Switch on appliance. (Do not set a heat setting.) 2. Touch Display/Signal for 4 seconds The child safety device is switched on. Switching off the child safety device Step Control panel 1. Switch on appliance. (Do not set a heat setting.) 2. Touch for 4 seconds Display/Signal lights up Switch appliance off. 3.
Power Management The appliance has a maximum power output. If this maximum power is exceeded, the Power Management automatically reduces the power of the last cooking zone to be switched on.
Using the timer 3 3 Function Condition Outcome after the time has elapsed Automatic cut-out a heat setting is set acoustic signal 00 flashes Cooking zone switches off Countdown timer cooking zones not in use acoustic signal 00 flashes If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed. If a cooking zone is switched off, the timer function set is also switched off.
Setting the time Step Control panel Indicator 1. Select Pilot light for the cooking zone selected flashes 2. Touch cooking zone or 00 to 99 minutes After a few seconds the pilot light flashes more slowly. The time is set. The time counts down. Switching off the timer function Step Control panel Indicator 1. Select Pilot light of cooking zone selected flashes faster Time remaining is displayed 2. Touch cooking zone The time remaining counts backwards to 00. The pilot light goes out.
Switching off the acoustic signal Step Control panel field Acoustic signal 1. Touch Acoustic signal to acknowledge. Acoustic signal stops. Automatic switch off Cooking surface • If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. • If one or more sensor fields are covered by objects (a pan, cloths, etc.) for longer than approx.
Tips on Cooking and Frying 3 Information on acrylamides According to the latest scientific knowledge, intensive browning of food, especially in products containing starch, can constitute a health risk due to acrylamides. Therefore we recommend cooking at the lowest possible temperatures and not browning foods too much. Cookware • You can recognise good cookware from the bottoms of the pans. The bottom should be as thick and flat as possible.
Examples of cooking applications The information given in the following table is for guidance only. Heat setting Cookingprocess 0 Cooking time Tips/Hints Residual heat, Off position Keeping food warm Keeping cooked foods warm as required Cover Melting Hollandaise sauce, melting butter, chocolate, gelatine 5-25 mins. Stir occasionally Solidifying Fluffy omelettes, baked eggs 10-40 mins.
Cleaning and Care 1 Take care! Risk of burns from residual heat. 1 Warning! Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid. 1 Warning! Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after each use 1.Wipe the appliance with a damp cloth and a little washing up liquid. 2.Rub the appliance dry using a clean cloth. Removing deposits 1.
What to do if … Problem Possible cause Remedy The cooking zones will not switch on More than 10 seconds have passed Switch the appliance on again. or are not functioning since the appliance was switched on The child safety device is switched on Deactivate the child safety device (See the section “Child safety device”) Several sensor fields were touched at the same time Only touch one sensor field Automatic switch off has been triggered Remove any objects (pan, cloths, etc.
Problem and number are displayed Possible cause Electronics fault If you are unable to remedy the problem by following the above suggestions, please contact your local Service Force Centre. 1 Warning! Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improper repairs.
Installation Instructions 1 Safety instructions Warning! This must be read! The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed.
Assembly 21
Rating Plate ZVH 66 F 55HAD64AO 949 593 078 230 V 50 Hz 2,4 kW ZANUSSI 25
Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners. In order to be able to assist you quickly, we require the following information: – Model description – Product number (PNC) – Serial number (S No.
www.electrolux.com www.zanussi.com www.zanussi.at www.zanussi.
