User manual

Door reversal

(Fig. 3)

Unplug the appliance before all operations.

To reverse the door, proceed as follows:

dismantle the lower hinge (3), pin (1), the threaded

insert (4) and the screw (2);

slide the door out from pin (5), unscrew the pin and

reposition on the opposite side;

unscrew the left front foot and reposition on the

opposite side;

unscrew the two screws which mask the holes for

ﬁxing the hinge from the left front side;

reassemble the door;

reassemble the lower hinge (turning it 180

), the

threaded insert, the pin and the screw on the

opposite side, as shown in the ﬁgure;

dismantle the handle (6) and reassemble it on the

opposite side.

The holes that are not used are to be masked with

the plastic plugs removed.

Fig. 3

Attention

After completion of the door reversibility operation,

verify that the door gasket is adherent to the

cabinet. If the ambient temperature is cold (i.e. in

Winter), the gasket may not ﬁt perfectly to the

cabinet. In that case, wait for the natural ﬁtting of

the gasket or accelerate this process by heating up

the part involved with a normal hairdrier.

D193/B

180°