REFRIGERATOR ZU 9155 INSTRUCTION BOOKLET 2222681-37
CONTENTS Instructions for the User Instructions for the Installer Important Safety Instructions 3 Technical Specifications 11 Description of the Appliance 4 Installation 11 Operation 4 Before use Setting the temperature Fresh food refrigeration The door shelves Normal Operating Sounds 4 4 5 5 5 Health and Safety Guidelines 6 Defrosting 6 Maintenance and Cleaning 7 Internal cleaning External cleaning Periodic cleaning Changing the light bulb When the appliance is not in use 7 7 7 8 8 So
IMPORTANT SAFETY INSTRUCTIONS These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Departement. Prior to Installation ■ General Safety ■ Check the appliance for transport damage. Under no circumstance should a damaged appliance be installed. In the event of damage please contact your retailer.
DESCRIPTION OF THE APPLIANCE ➀ ➁ ➂ ➃ ➄ ➅ ➆ ➇ Dairy compartment Movable shelf ➀ Bottle storage shelf ➇ Airduct exit Air inlet filter ➁ Salad bin Storage shelves ➆ Thermostat control ➅ ➄ ➂ ➃ OPERATION Before use Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly.
Fresh food refrigeration To obtain the best performance, do not store warm food or evaporating liquids in the refrigerator; do cover or wrap the food, particularly if it has a strong flavour. Do not cover the shelves with any protective material, such as paper, cardboard or plastic, which may obstruct the air circulation through them.
HEALTH AND SAFETY GUIDELINES Because of consumer demand, preservatives have been removed from many pre-prepared foods. This together with the changes in shopping habits to a once-a-week shop, mean that safe handling and storage of food is even more important than ever. The following tips should help you to ensure that the food in your home is in as perfect condition as possible. ■ Keep the time between buying chilled food and placing it in your fridge as short as possible.
MAINTENANCE AND CLEANING Warning Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELECTRICITY supply. This appliance contains hydrocarbons in its cooling unit maintenance and recharging must therefore only be carried out by authorised technicians. Internal cleaning Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughly.
Changing the light bulb Should the interior light fail to work, first switch off the appliance and disconnect from the electricity supply, then replace the bulb as follows: unscrew the light cover and then pull it outward by pressing as shown in the figure. Unscrew the bulb and replace it with a new 15 watt bulb (available from your nearest Service Force Centre). Replace the light cover by sliding it into its original position and replacing the screw.
SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning:- When you contact the Service Force Centre you will need to give the following details: 1. Your name, address and post code 2. Your telephone number 3. Clear and concise details of the fault 4. The model and serial number of the appliance (found on the rating plate) 5.
GUARANTEE CONDITIONS Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: ■ The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
TECHNICAL SPECIFICATIONS DIMENSIONS Height Width Depth 81,5 56 53,8 POWER SUPPLY VOLTAGE AND FREQUENCY TOTAL POWER ABSORBED AVERAGE DAILY UNITS ELECTRICITY (*) 220-240 V / 50 Hz 70 W 0,50 kWh GROSS CAPACITY 138 l NET CAPACITY 135 l cm cm cm (*)This figure is based on standard test results in accordance with European Standard EN153. Actual consumption will depend on how the appliance is used and where it is located.
ELECTRICAL CONNECTION WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted. Remove the fuse from the cut off plug. The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a 13amp socket in another part of your home.
BUILDING-IN INSTRUCTIONS Before carrying out any work, remove the plug from the power socket. Door reversal The appliance must be unplugged before starting work. To reverse the opening direction of the door, proceed as follows: Grid preparation Remove the grid from the appliance pulling it towards you by hand. F1 F 1 B G 3 Right door opening: Remove the left side (A) of the grid cutting it from the rear (see figure, a). A a A F1 F 2 S.I.003 1.
30 S.I.006 If the appliance is to be installed between two units with a matching furniture door/support panel, the door/panel must be fitted to the adjacent unit using suitable hinges (not supplied) before the appliance is installed. UPPER SUPER. 3. The appliance is equipped with adjustable support feet. To adapt the appliance to the height of the installation area (max 870 mm), screw in, or screw out the feet situated at each bottom corner. LOWER INFER. B A C D PR266 D326 4.
A B C D PR33/2 PR167/1 6. Fix cover (C) on guide (A) until it clips into place. 9. Fix cover (D) on guide (B) until it clips into place. Fitting the plinth 8mm Important For the efficient operation of the appliance, it is important that the original ventilation grid is used. A PR167 B 7. Open the appliance door and the furniture door at 90°. Insert the small square (B) into guide (A). Put together the appliance door and the furniture door and mark the holes as indicated in the figure.
© Electrolux Household Appliances Limited 2002
