User Manual Tumble Dryer ZTK123
Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner of the appliance.
Important safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
WARNING! Never stop a tumble dry before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated. RISK OF FIRE! Installation • This appliance is heavy. Care should be taken when moving it. • When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre. • All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to.
Description of the appliance 1 Control panel 2 Fluff filters 3 Rating Plate 4 Consenser Unit 5 Water reservoir 6 Adjustable feet 1 2 3 4 5 6 5
The control panel Programme/Time selector dial Textile button Low temperature button Time selector dial Low temperature button Textile button 6 Indicator Start/Pause lights button Allows you to select time controlled drying. Turn the dial to the required time. Pressing this button allows drying to be performed at a lower temperature, for delicate items. You can select 2 different options: - Cotton Cycle: to be used for cotton, - Synthetics to be used for synthetic or delicate items.
Drying programmes Programme Max load kg 7 Type of laundry Cotton Options Textile • Synthetics • Cotton Time • Delicate Synthetics (3kg) Cotton (7 kg) 3 Synthetics Description of programme If the TIME programme has been selected, programme duration time of 15 minutes up to 150 minutes can be set by intervals of 5 minutes or 10 minutes. Drying thick or multi-layered textiles, e.g. terry towelling items.
Before the first use Ensure that the electrical connections comply with the installation instructions. • Remove the polystryrene block and any material from the drum. • Before using your tumble dryer for the first time, we recommend that you place a few damp cloths inside the appliance and dry for 30 minutes. There may be dust inside a brand new tumble dryer.
Make sure that no metal objects are left in the laundry (e.g. hair clips, safety pins, pins). Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or long tapes. To avoid laundry becoming tangled: close zips, button up duvet covers and tie loose ties or ribbons (e.g. of aprons). Turn items with double-layered fabrics inside out (e.g. with cotton lined anoraks, the cotton layer should be outermost). These fabrics will then dry better.
Operating sequence Load the laundry Connect the appliance. Open the door (see picture). 1149 Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door. Please check the laundry does not get caught between the door and filter. P1108 Select the required programme Turn the programme selector dial to the required programme. The light Start/Pause starts to flash. The selector dial is divided into following sections: • Time Allows you to time controlled drying.
Press this button to start the dryer after having selected the programme and the options. The relevant light will stop flashing. If the programme selector dial is turned to another position, when the machine is running, the buzzer will sound and the programme phase indicator lights will flash. The drum turns alternately in both directions during drying. All drying programmes end with a 10 minute cooling phase (light Cooling is on). You may remove the laundry after this phase.
dial to “O” all the lights corresponding to the phases making up the performed programme come on. After each use • Clean the filters. • Empty the water reservoir. Modifying the programme To change a programme which is running, first cancel it by turning the programme selector dial to “O”. Select the new programme and press the Start button.
Care and cleaning Important: You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. External cleaning Use only soap and water and then dry thoroughly. Important: do not use methylated spirit, diluents or similar products. Cleaning the door Clean periodically the interior part of the door to remove any fluff from the seals around the filter. Accurate cleaning ensures correct drying.
Clean the rubber seal round the condenser cabinet and in the inner part of the small door with a damp cloth. Important: Do not use the appliance without filters. 153 6 Cleaning the condenser unit Clean the condenser when light comes on. The condenser is situated at the lower part of the cabinet behind a small door. To open the door, push the catch as per picture. During the drying cycle or at the end, it is normal for water to be present on the surface of the condenser insertion.
• Push it until it clicks and turn the yellow stop downwards firmly lock it. • Close the small door and press the START/PAUSE button again to allow the programme to continue. P1203 The reservoir must be re-inserted correctly. After emptying and inserting the reservoir the START-button has to be depressed again to allow the programme to continue. Handy tip: The condensed water may be used in a steam iron or to top up a battery, etc. In this case it must be filtered (e.g. through a coffee filter).
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below. During machine operation it is possible that the red Start/Pause pilot light flashes to indicate that the machine is not working. Once the problem has been eliminated, press the Start/Pause button to restart the programme.
Malfunction Possible cause Solution When pressing a button, the corresponding button flashes several times. • Washing protection. After the start of the programme, the option can no longer be set. • Turn the programme knob to “0” Set the programme again Drying cycle ends shortly after programme starts. END light illuminated. • Not enough washing loaded or washing loaded is too dry for selected programme. • Select time programme Programme inactive, Water reservoir full light illuminated.
Technical data Technical data Dimensions Electrical connection Voltage - Overall power Fuse Width Height Depth 60 cm 85 cm 58 cm Information on the electrical connection is given on the rating plate on the inner edge of the appliance door Depth with loading door open Maximum Load Use 109 cm Cotton Synthetics 7 kg 3 kg Domestic + 5°C + 35°C This appliance conforms with the following EU Directives: –2006/95/EC dated 12.12.06 Low Voltage Directive – 89/336/EEC dated 03.05.
Consumption values Consumption values (*) Programme duration (in minutes) Energy consumption (in kWh) Revolutions per minute Cottons Cupboard 1) 130 4,4 1000 Cottons Iron 1) 100 3,41 1000 Synthetics Cupboard 2) 48 1,36 1200 Programme Max load: 1) Cottons load: 2) Synthetics load: 7 kg 3 kg The consumption values have been established under standard conditions. They may deviate when the machine is operated in domestic circumstances.
Disposal Packaging materials The materials marked with the symbol are recyclable. This means that they can be recycled by disposing of them properly in appropriate collection containers. Machine Use authorised disposal sites for your old appliance. Help to keep your country tidy! Old appliance The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Installation Unpacking Slide out the polythene bag with the polystyrene stuffing before using the appliance Pull off adhesive strips from inside machine on top of drum. the floor clearance through deeppile carpets, strips of wood or similar. This might cause heat build-up which would interfere with the operation of the appliance. Important The hot air emitted by the tumble dryer can reach temperatures of up to 60°C.
Important: Reversing the door is not possible if after this operation the appliance result installed behind a door with a hinge on the opposite side to that of the appliance. This operation must be carried out by qualified personnel. Please contact the nearest Service Centre. Electrical connection This machine is designed to operate on a 230 V, single-phase, 50 Hz supply. Check that your domestic electrical installation can take the maximum load required (2.
Þ Albania +35 5 4 261 450 Belgique/België/Belgien +32 2 363 04 44 Česká republika +420 2 61 12 61 12 Danmark +45 70 11 74 00 Deutschland +49 180 32 26 622 Eesti +37 2 66 50 030 España +34 902 11 63 88 France www.electrolux.fr Great Britain +44 8705 929 929 Addington Way, Luton, Bedfordshire LU4 9QQ Hellas +30 23 10 56 19 70 4, Limnou Str.
Þ Nederland +31 17 24 68 300 Vennootsweg 1, 2404 CG - Alphen aan den Rijn Norge +47 81 5 30 222 Risløkkvn. 2 , 0508 Oslo Österreich +43 18 66 400 Herziggasse 9, 1230 Wien Polska +48 22 43 47 300 ul. Kolejowa 5/7, Warszawa Portugal +35 12 14 40 39 39 Quinta da Fonte - Edificio Gonçalves Zarco - Q 35 -2774-518 Paço de Arcos Romania +40 21 451 20 30 Str.
Þ Suomi www.electrolux.
www.electrolux.