24978195 ZT102-1082.qxd 28/02/01 16.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 2 (Nero/Process Black pellicola) CONTENTS Important information . . . . . . . . . . . . . . . . . Page 3 Installation . . . . . . . . . . . . . . . . . . . . . Page 4 ■ Unpacking . . . . . . . . . . . . . . . . . . . . . . Page 4 ■ Positioning . . . . . . . . . . . . . . . . . . . . . . Page 4 ■ Water inlet . . . . . . . . . . . . . . . . . . .
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 3 (Nero/Process Black pellicola) IMPORTANT INFORMATION It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 4 (Nero/Process Black pellicola) INSTALLATION Unpacking Before starting the machine up, the packing must be removed as follows. You are advised to keep all the packaging for reuse in case the machine is to be transported again. Using a spanner unscrew and remove the rear right bolt. Lay the machine gently on its back, making sure that the hoses are not squashed. Set the machine upright and remove the two remaining bolts from the back.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 5 (Nero/Process Black pellicola) Water inlet Water drainage The inlets on the back of the appliance are colour coded, blue for cold and red for hot. Connect the hoses to taps with a 3/4” thread. This appliance is designed to be permanently plumbed into your home's water supply and drainage system. The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic “U-Piece” supplied.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 6 (Nero/Process Black pellicola) If you intend the drain hose to empty into a sink, make sure that the sink is empty and the plug hole is not blocked. Use the plastic “U-Piece” supplied. P0022 Important Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 7 (Nero/Process Black pellicola) Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance’s rating plate.
28/02/01 16.33 Pagina 8 (Nero/Process Black pellicola) Building-in This appliance has been designed to be built into the kitchen furniture. The recess should have the dimensions shown in picture A. 600 The required dimensions are given in the picture C. The hinges will be fixed to the door by means of screws for wood (2-Fig. B) supplied with the appliance. 35 Ø 12.5-14 depth 16 -22 B 124978195 ZT102-1082.qxd 570 min.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 9 (Nero/Process Black pellicola) If the door has to be opened from left to right, invert the position of the plates (7), the magnet (4) and the plate (5) (Fig. B and E). Mount the countermagnet (6) and the hinges (1) as previously described. E 6 4 5 Position the base into the recess with its front edge as far forward as the adjoining plinth line will allow.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 10 (Nero/Process Black pellicola) DESCRIPTION OF THE APPLIANCE 1 1 2 3 4 5 6 7 8 9 Detergent dispenser drawer Programme chart Mains-on light ON/OFF button Half load button Programme selector dial Door handle Drain filter Adjustable feet 3 45 6 2 7 8 1 Detergent dispenser drawer Symbols Prewash 9 Wash Fabric softener P0239 TECHNICAL SPECIFICATIONS DIMENSIONS Height Width Depth POWER SUPPLY VOLTAGE TOTAL POWER ABSORBED 82 cm (32.3”) 60 cm (23.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 11 (Nero/Process Black pellicola) GETTING TO KNOW YOUR MACHINE Control panel PROGRAMMES ON-OFF HALF LOAD ZT 102 IMPORTANT : PLEASE READ THE INSTRUCTION BOOK BEFORE USING THIS APPLIANCE 1 2 3 4 5 1 Programme chart 4 Half load button It will help you to select the suitable programme for your laundry. Select this button to reduce water consumption on the rinse cycle when washing a smaller load of cottons or linens (maximum load size = 2.25 kg).
4978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 12 (Nero/Process Black pellicola) i Washing hints Do NOT overload the machine. Weigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: ■ Use a good quality detergent suitable for automatic washing machines. ■ Use the correct quantities of detergent. ■ For wool, use gentle detergent only in small quantities.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 13 (Nero/Process Black pellicola) Use of detergent and additives Which detergent? And in which form? To ensure you obtain the best wash results from your appliance, it is important to use the right detergent in your everyday wash, and only detergents recommended for use in automatic machines.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 14 (Nero/Process Black pellicola) Programmes for cotton and linen Recommended load: max. 4.5 kg (10 lb) Progr. time mins.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 15 (Nero/Process Black pellicola) Programmes for synthetics, delicates and wool Recommended load: max. 2 kg (4.5 lb); wool max. 1 kg (2.
124978195 ZT102-1082.qxd i 28/02/01 16.33 Pagina 16 (Nero/Process Black pellicola) Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 17 (Nero/Process Black pellicola) USING YOUR MACHINE Washing 4.5 kg of white cotton at 95°C Suppose you have 4.5 kg of normally dirty laundry to wash. It is white cotton and is suitable for high temperature washing. 5. Select the required wash programme Turn the programme selector dial clockwise to the required programme. A 1. Load the laundry Open the door by pulling the catch outward. Load the items one at a time and close the door. 2.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 18 (Nero/Process Black pellicola) Washing 2 kg of synthetic fabrics at 50°C Suppose you have 2 kg of synthetic fabrics to wash. They are rather delicate fabrics and should not be washed at a high temperature. 4. Select the required wash programme Turn the programme selector dial clockwise to the required programme. G 1. Load the laundry Open the door by pulling the catch outward. Load the items one at a time and close the door. 2.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 19 (Nero/Process Black pellicola) MAINTENANCE AND CLEANING Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply. Descaling Cleaning the drawer recess Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. The water we normally use contains lime.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 20 (Nero/Process Black pellicola) Cleaning the filter The water drain filter A clean filter is important for the correct functioning of the machine, and should therefore be cleaned after every washing programme. Place a container underneath to catch any spillage. If the filter is blocked and the machine is unable to drain you will need to drain the water manually from the machine at this stage.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 21 (Nero/Process Black pellicola) SERVICING Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 22 (Nero/Process Black pellicola) If after the above checks, there is still a fault, call your local Zanussi Service Force Centre. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. Please note that proof of purchase is required for any in-guarantee service calls.
124978195 ZT102-1082.qxd 28/02/01 16.
124978195 ZT102-1082.qxd 28/02/01 16.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 25 (Nero/Process Black pellicola) To contact your local Service Force Centre telephone 08705 LONDON & EAST ANGLIA MIDLANDS BIRMINGHAM 66 Birch Road East Wyrley Trading Estate Witton Birmingham B6 7DB BOURNE Pinfold Road Bourne PE10 9HT BRIDGNORTH 68 St.
124978195 ZT102-1082.qxd 28/02/01 16.33 Pagina 26 (Nero/Process Black pellicola) From the Electrolux Group. The world’s No. 1 choice. The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.
