GB User manual Dishwasher ZSF2450 2
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ Use of the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ Setting the water softener _ _ _ _ _ _ _ _ _ _ Use of dishwasher salt _ _ _ _ _ _ _ _ _ _ _ _ _ Use of rinse aid _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Loading cutlery and dishes _ _ _ _ _ _ _ _ _ _ Use of detergent _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 3 4 6 6 7 7 8 9 Setting and starting a washing programme _ _ _ _ _ _ _ _
Installation • Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier. • Remove all packaging before first use. • A qualified and competent person must do the electrical installation. • A qualified and competent person must do the plumbing installation. • Do not change the specifications or modify this product. Risk of injury and damage to the appliance.
Indicator lights The indicator light comes on when the washing phase or the rinsing phase operates. The indicator light comes on when the drying phase operates. The indicator light comes on when the washing programme is completed. 1) 1) The indicator light comes on when it is necessary to fill the salt container. Refer to the chapter 'Use of dishwasher salt'. The salt indicator light can stay on for some hours, but it does not have an unwanted effect on the operation of the appliance.
Washing programmes Programme 1) 2) Degree of soil Type of load Heavy soil Crockery, cutlery, pots and pans Prewash Main wash up to 70°C 2 intermediate rinses Final rinse Drying Mixed normal and light soil Crockery, cutlery, pots and pans Prewash Main wash up to 45°C or 70°C 1 or 2 intermediate rinses Final rinse Drying Programme description Normal soil Crockery and cutlery Prewash Main wash up to 55°C 1 intermediate rinse Final rinse Drying Normal or light soil Crockery and cutlery Main was
Programme Programme duration (in minutes) 1) Energy consumption (in kWh) Water consumption (in litres) - 0,4 6,0 1) The digital display shows the programme duration. The pressure and temperature of the water, the variations of power supply and the quantity of dishes can change these values. Use of the appliance Refer to the following instructions for each step of procedure: 1. Make a check if the water softener level is correct for the water hardness in your area.
3. Press and hold function buttons B and C until the indicator lights of function buttons A, B and C start to flash. 4. Release function buttons B and C. 5. Press function button A. – The indicator lights for function buttons B and C go off. – The indicator light for function button A continues to flash. – The digital display shows the current level. = level 3. Example: digital display shows 6. Press the function button A one time to increase the water softener level by one step. 7.
max 1 2 3 4 Caution! Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liquid detergent). There is a risk of damage to the appliance. Adjusting the dosage of rinse aid The rinse aid dial is set at the factory at position 1. To increase or decrease the dosage refer to 'What to do if...' Loading cutlery and dishes Helpful hints and tips Caution! Only use the appliance for household utensils that are applicable for dishwashers.
Primary basket Arrange the deep dishes and large lids around the edge of the basket. Arrange the items to let water touch all surfaces. Arrange long and/or sharp items of cutlery horizontally in the primary basket. Be careful with sharp items such as knives. 1 Arrange items on and below the cup racks. For longer items fold the cup racks up. 1 Cutlery basket Warning! Do not put long-bladed knives in a vertical position to prevent injury. 2 Use the cutlery basket Use the cutlery grid.
It is not necessary to fill the salt container and the rinse aid dispenser. Do these steps when the drying results are not satisfactory: A 1. Fill the rinse aid dispenser with rinse aid. 2. Set the rinse aid dosage to position 2. 5 6 Use of detergent tablets Put the detergent tablet in the detergent dispenser (A). Detergent tablets contain: • detergent • rinse aid • other cleaning agents. Do these steps to use detergent tablets: 1.
2. Set a new washing programme . Fill the detergent dispenser with detergent before you set a new washing programme. – When you cancel a delay start, you also cancel the washing programme. 2. Set a new washing programme. Interrupting a washing programme You can select the washing programme and delay start also with the door closed. When you press a programme button you have only 3 seconds to select a different washing programme or a delay start.
A B 1 2 Remove the filters A and B from the bottom of the appliance. 1 2 2 1 3 4 Fully clean the filters below running water. 3 1 2 5 Put the filters back. Turn the microfilter clockwise to lock it. Cleaning the spray arm Regularly examine the spray arm. Remove remaining food from the holes in the spray arm. Do these steps to remove and to put the spray arm back: 12 External cleaning Clean the external surfaces of the appliance and control panel with a damp soft cloth. Only use neutral detergents.
What to do if… The appliance does not start or stops during operation. If there is a fault, first try to find a solution to the problem yourself. If you cannot find a solution to Fault code and malfunction the problem yourself, contact your dealer or the Service Force Centre. Possible cause and solution • digital display shows The dishwasher does not fill with water • The water tap is blocked or furred with limescale. Clean the water tap. • The water tap is closed. Open the water tap.
The cleaning results are not satisfactory The dishes are not clean • The selected washing programme is not applicable for the type of load and soil. • The basket is loaded incorrectly so that water cannot reach all surfaces. • Spray arm does not turn freely because of incorrect arrangement of the load. • The filters are dirty or not correctly installed. • The quantity of detergent is too little or missing. Limescales particles on the dishes • The salt container is empty.
household waste disposal service or the shop where you purchased the product. The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Discard the packaging materials in the applicable container at the community waste disposal facilities. Warning! To discard the appliance, follow the procedure: • Pull the mains plug out of the socket. • Cut off the mains cable and mains plug and discard them. • Discard the door catch.
If the water inlet hose is too short, replace the water inlet hose with an applicable, longer highpressure hose. Do not connect an extension hose. To suit the installation, it is possible to turn the end of the hose that is connected to the dishwasher. Do these steps : connected to the mains socket, the water safety system operates when the dishwasher is off. Two procedures are possible to install the water drain hose : 1 1. Loosen the retaining nut. 2. Turn the hose. 3. Tighten the retaining nut.
www.zanussi.com 156986160-00-012009 To buy accessories, consumables and spare parts at our online shop please visit: www.zanussi-electrolux.co.