User manual

Maint

enance & Cleaning

Before any maintenance of cleaning work is car-

ried out DISCONNECT the appliance from the

ELECTRICITY SUPPLY.

Internal Cleaning

Clean the inside and accessories with warm water and

bicarbonate of soda (5 ml to 0.5 litre of water). Rinse and

dry thoroughly.

NEVER use detergents, abrasive powders,

highly perfumed cleaning products or wax

polishes to clean the interior as these will

damage the surface and leave a strong

odour.

External Cleaning

Wash the outer cabinet with warm soapy water.

When the appliance is not in use

When the appliance is not in use for long periods, discon-

nect from the electricity supply, empty all foods and clean

the appliance, leaving the door open to prevent unpleas-

ant smells.

Defrosting

While the appliance is in operation the ice-making com-

partment becomes progressively covered with frost.

This frost, acts as an insulator and prevents the cold from

reaching the insulator food. The frost should be removed

whenever the thickness of the frost exceeds 6 mm (¼”).

To carry out complete defrosting proceed as follows.

Pull out the plug from the wall socket or turn the thermo-

stat control knob to the „0” position.

Leave the fridge and ice-making compartment doors

open, when defrosting is completed, dry the appliance

thoroughly. Remove any defrost water collected in the

tray.

Replace the plug in the socket or return the thermostat to

the initial position and, after letting the appliance run for

at least an hour, place the food in the refrigerator.