EN User manual Wine refrigerator ZRW106N
Welcome to the world of Electrolux You’ve chosen a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. Electrolux ambition is to offer a wide variety of quality products that would make your life even more comfortable. You can look at some examples on the cover in this manual. But now it’s time to study this manual and start using and enjoying the benefits from your new machine. We promise that it’ll make your life a little easier.
The following symbols are used in this manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. General information and tips Environmental information The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Contents Safety information_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Operation_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Maintenance _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Technical information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 6 6 8 9 Customer service and spare parts _ _ _ _ _ _ _ _ _ _ 9 Electrical connection_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Ins
• Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or more serious malfunctioning. Refer to your local Service Centre, and always insist on genuine spare parts. • This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians. Use • The domestic wine refrigerator is designed to be used specifically for the storage of potable wine only.
Environment Protection This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. The insulation foam contains flammable gasses: the appliance shall be disposed according to the applicable regulations to obtain from your local authorities. Avoid damag ing the cooling unit, especially at the rear near the heat exchanger.
The correct position must in any case be determined bearing in the mind that the inside temperature depends on these factors: • Room temperature • How often the door is opened • The quantity of bottles stored • The position of the appliance Use Wine arrangement Please place the wine bottles as the below picture. Storage advice The storage time for wine depends on ageing, the type of grapes, alcoholic content and level of fructose and tannin contained in it.
Maintenance Important Unplug the appliance before carrying out any operation. Important This appliance contains hydrocarbons in the refrigerant circuit; therefore maintenance and recharging must only be carried out by personnel authorized by the manufacturer. Defrosting Defrosting in the refrigerator compartment occurs automatically. The defrost water is run into a bowl located at the back of the appliance, above the compressor, where it evaporates.
Technical information Net Fridge Capacity lt. 46 Energy Consumption kWh/24h 0.268 Energy Consumption kWh/year 98 Dimensions mm High 511 Width 440 Depth 511 The technical information are situated in the rating plate on the internal left side of the appliance.
Installation Important In order to reserve the required space around the refrigerator for ventilation, please keep 100mm distance between 2 sides and top of the wine refrigerator and the wall and 50mm distance between rear of refrigerator and the wall. 2. Remove the two screws and take the handle off. Put the handle at a safe place. 3. Move the hole covers from the left side to the right side. Door reversibility Before carrying out any operations, remove the plug from the power socket.
5. Lay down the appliance back side down and remove the upper hinge cap. 6. Unscrew the upper hinge and remove it, then lift the door and put it on a padded surface to prevent it be scratched. Put the upper hinge and the screws in a safe place. 7. Pull out the cover-slip using a flat object, move it to right side and insert into the uncovered holes. 8. Move small cap to other side.
9. Rotate the door, then unscrew the screw and transfer the stopper to other side. Then securely fix the stopper with screw. 12. Move the foot from left to right and fix it in right hole. 10. Unscrew and remove the lower hinge pin and install it to other hole. 13. Fix the lower hinge with screws on the other side. 11. Unscrew the screws that fix the lower hinge and take the lower hinge with foot off.
14. Put the door on the lower hinge. Keep the door closing the cabinet and put the upper hinge into the hinge hole. The right and left side of the door must aline with the sides of the cabinet. Then securely fix the upper hinge. Levelling The appliance should be level in order to eliminate vibration. There are 4 height adjustable feet at bottom of the appliance, 2 feet in the front and 2 feet in the back.
What to do if... Warning: Before troubleshooting, disconnect the power supply. Only a qualified electrician of competent person must do the troubleshooting that is not in this manual. Malfunction I mportant: There are some sounds during normal use (compressor, refrigerant circulation). Possible cause Remedy Temperature is not properly adjusted. Please look in the “Use” section. The wine is too warm. Door was open for an extended period. Open the door only as long as necessary.
472010 www.zanussi.