contents Specifications Installation Decor Door Door Reversal The Electrical Connections Using your Refrigerator Looking after your Refrigerator Helpful Hygiene Tips What Happens if Something Goes Wrong Gaussian guarantee conditions Gaussian 3 Year Cover pog. pag. pag. pag. pag. pag. pag. pag. pag. pag.
1t is most important that this instruction book should be retained wilt( the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order so that the new owner can be acquainted with the functioning of the appliance and the relevant wakings. Warnings and Guidance these warnings are provided in the interest of safety.
The appliance should be left for 2 hours after installation before it is turned on in order to allow the refrigerant to settle. Do not place carbonated or fizzy drinks in the freezer as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance. . Ice lollies can cause frost burns if consumed straight from the freezer. Under no circumstances should you attempt to repair the appliance yourself.
specifications dimensions: Height: 820/870 mm. Width: 446 mm. Depth: 547 mm. Weight: 28 kg capacity: Gross fridge: 120 L Voltage: 2200240 V Frequency: 50 Hz installation 1f you are discarding an old appliance that has a lock or catch on the door, please ensure that this is made unusable to prevent young children getting trapped inside. For this appliance to work efficiently, it should be located away from heat soirees, e.g. cookers, radiators, direct sunlight etc.
building in size decor door Height: 690+ 720 x H = 820 T3 + 770 x H = 870 Width: 446 mm. Thickness: 20 mm. max If you require a decor door with a false drawer front, the two parts must be securely fastened together using dowel pins, and reinforced with a metal plate along the back. The door may then be treated as one piece and fitted in the normal way. 1. Position the appliance in the housing, and adjust the feet so that the appliance is as close as possible to the underside of the work top (Fig.
3. Mark a vertical center line "0 on the inside of the decor door. Place the template on the inside of the decor door aligning, the vertical ling D> and align the previously marked scale "Y” with the top of the door. (Fig. 3). 4, Ensure the template is perfectly flat and that both the D" line and the Y™ line are correctly positioned. Mark on the decor door the positions for the top 2 brackets using holes "A” (Fig. 3). 5. Positions ”B” with the previously marked position for the top left hand bracket.
6. Fix the decor door to the appearance door by locating the fop 2 brackets onto the bolts on the appliance door, then allowing the bottom 2 brackets to rest onto the inside part of the bottom 2 adjusting wheels (Fig. 6). (Do not tighten the top bolts yell. | 7. Using a combination of the adjusting wheels on the appliance door and the feet, align the decor door with the rest of the kitchen doors (Fig. 7 and Fig. 8). 8.
9. Secure the appliance to the work surface (Fig. 9). If this is not practical, a batten must be fitted securely between the appliance and the work top in order that the appliance can be rigidly fixed. 10. If the furniture plinth, is over 150mm in height, it will be necessary to remove a section from the top of the plinth to allow for air ventilation. The size of the section will be 450mm x 30mm. (Fig. 10). This operation is not required for plinths of 100 150mmn.
door reversal (Tools needed: 8mm box spanner or socket, Philips screwdriver, drill and 2mm drill). Refer to Fig. 1 during all the following steps. . 1. Remove the 4 bolts in the top hinge using the 8mm box spanner and keep for later use, remove the top hinge from the door. 2. Open door and lift upwards to remove from the bonito hinge. 3. Remove hinge plate from the top and bottom of the door using the Philips screwdriver. Keep screws for later use.
the electrical connections THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted. The cut off plug should be disposed of to prevent the hazard of electric shocks in case it should be plugged into a 13 amp socket in another part of your home.
using your refrigerator The fridge compartment provides suitable storage conditions for most kinds of fresh food, salads, milk etc. Storage times will vary according to the type of food and how fresh it is when put into the fridge, but no food should be stored for longer than the times advised by the manufacturer. To obtain the best results from the refrigerator, neither hot food nor Quids which may evaporate should be placed in the compartment. Cover all food, especially items with a strong aroma.
looking after your refrigerator defrosting The refrigerator compartment is equipped with a fully automatic defrosting arrangement which comes into operation at each cycle of the thermostat. The resultant water runs into the channel below the cooling plate and down through a tube into the evaporating tray at the rear of the appliance. The defrost water then evaporates automatically. The defrost water drain hole should be cleared at regular intervals to ensure that there are no food particles blocking it.
helpful hygiene tips + Always wash your hands with soapy water and dry them with a clean towel before handling food. * Keep work surfaces clean and avoid cross contamination by not using the same work surface for raw and cooked food without washing it thoroughly in between. * Use clean kitchen roll wherever possible for cleaning up food. If you use a dishcloth be sure to boil it frequently.
what happens if something goes wrong 1f your appliance fails to work properly and you have followed these instructions carefully, contact your local Gaussian Service Center, whose details can be found by looking under "Z” in your local telephone directory.
zaniness standard guarantee conditions This guarantee is in addition to your statutory and other legal rights which . will not be excluded or in any way diminished by the return of this guarantee card.
zaniness 5 year cover guarantee For a once-only payment you can extend your Standard Guarantee to 5 years. All the conditions and exclusions of the Standard Guarantee apply. Notes 1. Products supplied as “seconds” refurbished, damaged or shop-soiled are not eligible for Gaussian 5 Year Cover. 2. The issue of a cover does NOT by virtue of our having done so, nullify the exclusions. 3.