User manual

Door reversal

Unplug the appliance before all operations.

To reverse the door, proceed as follows:

1. Remove the lower hinge (1) and the foot (2);

2. unscrew the left front foot and reposition on the

opposite side;

3. unscrew the two screws which mask the holes for

fixing the hinge from the left front side;

4. slide the door out from pin (G),unscrew the pin

and reposition on the opposite side;

5. reassemble the door;

6. Re-assemble the lower hinge (1) and the foot (2)

on the opposite side, as shown in the figure;

7. Unscrew the handle. Refit it on the opposite side

after having pierced the plugs with a punch.

Cover the holes left open with the plugs supplied

in the documentation pack.

Attention

After completion of the door reversibility

operation, verify that the door gasket is adherent

to the cabinet. If the ambient temperature is cold

(i.e. in Winter), the gasket may not fit perfectly to

the cabinet. In that case, wait for the natural

fitting of the gasket or accelerate this process by

heating up the part involved with a normal

hairdrier.

PR220