EN User manual Fridge Freezer ZRB35214WA
Contents Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ 2 5 6 6 7 8 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
nents of the refrigerant circuit become damaged. If the refrigerant circuit should become damaged: – avoid open flames and sources of ignition – thoroughly ventilate the room in which the appliance is situated • It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock.
• • • • To achieve sufficient ventilation follow the instructions relevant to installation. Wherever possible the back of the product should be against a wall to avoid touching or catching warm parts (compressor) to prevent possible burn. The appliance must not be located close to radiators or cookers. Make sure that the mains plug is accessible after the installation of the appliance. Connect to potable water supply only (If a water connection is foreseen).
Product description 1 2 3 4 8 6 7 1 Vegetable drawers 2 Cabinet shelves 5 Door shelves 6 Bottle shelf 3 Bottle rack 4 Control panel 7 Freezer drawers 8 Rating plate www.zanussi.
Control panel 1 3 1 Temperature indicators LED 2 QuickChill button 3 Temperature regulator Switching on Insert the plug into the wall socket. Temperature regulation To operate the appliance, proceed as follows: • touch the temperature regulator button until the LED corresponding to the required temperature lights up. Selection is progressive, varying from 2 to 8°C. At first button touch actual setting LED keeps blinking. Any time the button is touch the set temperature is moved to 1 position .
Daily use Storage of frozen food When first starting-up or after a period out of use, before putting the products in the compartment let the appliance run at least 2 hours. The freezer drawers ensure that it is quick and easy to find the food package you want. If large quantities of food are to be stored remove all drawers . On all shelves it is possible to place food that protrude until 15 mm from the door.
you are over the end points, push the baskets back in their position. 2 1 Helpful hints and tips Normal Operating Sounds • You may hear a faint gurgling and a bubbling sound when the refrigerant is pumped through the coils or tubing. This is correct. • When the compressor is on, the refrigerant is being pumped around and you will hear a whirring sound and a pulsating noise from the compressor. This is correct. • The thermic dilatation might cause a sudden cracking noise.
• • • • • it possible subsequently to thaw only the quantity required; wrap up the food in aluminium foil or polythene and make sure that the packages are airtight; do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter; lean foods store better and longer than fatty ones; salt reduces the storage life of food; water ices, if consumed immediately after removal from the freezer compartment, can possibly cause the skin to be freeze burnt;
Defrosting of the freezer The freezer compartment of this model, on the other hand, is a "no frost" type. This means that there is no buildup of frost when it is in operation, neither on the internal walls nor on the foods. The absence of frost is due to the continuous circulation of cold air inside the compartment, driven by an automatically controlled fan. Troubleshooting Caution! Before troubleshooting, disconnect the power supply.
Replacing the control unit The appliance is equipped with a longlife LED interior light. Only service is allowed to replace the control unit. Contact your Service Center. Closing the door 1. Clean the door gaskets. 2. If necessary, replace the defective door gaskets. Contact the After Sales Service. Installation Caution! Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the appliance.
A fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used. B Warning! A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely.
• Place the upper door on the middle hinge pivot. (12) • Fix the door with upper hinge and fix it with screws of it. (13) 6 5 13 • Screw off the screws of the lower hinge and remove the hinge. (8) • Screw off the lower cover plugs and screw them into the hole on the opposite side. (7) • Put the lower hinge on the opposite side and fix it with the screws. (8) 7 8 • Place the lower door on the lower hinge pivot. (9) • Screw off the middle cover plugs and screw them into the hole on the opposite side.
Technical data Dimension Height 1845 mm Width 595 mm Depth 642 mm Rising Time 18 h Voltage 230-240 V Frequency 50 Hz The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label. Environmental concerns Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic 14 appliances.
www.zanussi.
280151857-A-172013 www.zanussi.
