REFRIGERADOR REFRIGERATOR FRIGORIFICO ZO 29 Y ZO 29 S ZO 29 N LIBRO DE INSTRUCCIONES 2222 151-92 INSTRUCTION BOOKLET MANUAL DE INSTRUÇÕES
Warning! 595 We congratulate you on your choice. Read this instruction manual carefully and follow the recommendations it provides to benefit from years of excellent service. The appliance which you have just purchased has been very accurately controlled throughout the entire manufacturing process. Nevertheless, should any problem arise during usage, whether it be during the warranty period, or when such period has expired, please contact your nearest Zanussi Service Centre immediately.
WARNINGS GB It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings. These warnings are provided in the interest of safety.
CONTENTS Installation 16 ª Location 16 ª Rear spacers 16 ª Cleaning the interior 17 GB ª Changing the opening direction of the door 18 ª Changing the opening direction of the compartment door 19 Technical specification 19 ª Electrical connection 19 Use 20 ª Operation - Temperature adjustment 20 ª Fresh food refrigeration 20 ª Movable shelves 21 ª Positioning the door shelves 21 ª Frozen food storage 22 ª Thawing 22 ª Making ice cubes 22 ª Defrosting 22 Maintenance 23 ª P
INSTALLATION GB If this refrigerator featuring magnetic door seals is to replace an older appliance having a spring lock on the door or lid, be sure to make that spring lock unusable before you discard the old appliance. This will prevent it from becoming a death-trap for a child. Location A B 10 mm 100 mm Fig. 1 10 mm The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc.
Important It is essential that the appliance be connected to an efficient earth tap. For this purpose the supply cable plug incorporates a special earth contact. If the sockets of your domestic wiring system are not earthed, have the appliance connected to a separate earth wire by a qualified electrician in accordance with existing safety regulations. The Manufacturer declines all responsibility if the above safety precautions are not observed.
Changing the opening direction of the door Unplug the appliance before performing the following operations: Remove the ventilation grille (D-Fig. 3). Unscrew the bottom hinge (E-Fig. 3). Remove the door from the upper pivot (A-Fig. 4). Remove the pivot and the washer (A+B-Fig. 4) from the upper hinge (C), then mount these on the opposite side. Re-assemble the door. Screw down the bottom hinge (E-Fig. 3) on the opposite side, using the screws previously removed. Detach the plug (F-Fig.
Changing the opening direction of the compartment door (Fig. 6) Remove pin (1). Remove the door. Pin (4) could drop out when this operation is carried out; if so, it must be retrieved for fitting on the opposite side. Remove bush (5) and fit it on the opposite side. Remove the catch (3) and fit it on the opposite side. Fit pin (4) on the opposite side. Reposition the door and insert pin (1), pressing it into place. Fig.
USE GB Operation - Temperature adjustment Fresh food refrigeration Turn the thermostat knob clockwise beyond position «O» to the required setting. A medium setting is generally the most suitable. Temperature is adjusted automatically and may be increased (less cold) by turning the knob towards the lower numbers, or may be decreased (colder) by turning it towards the higher numbers.
Movable shelves Fig. 8 The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. For better use of space, the front half-shelves can lie over the rear ones. D338 Fig. 9 Positioning the door shelves (Fig. 910) To permit storage of food packages of various sizes, the door shelves can be adjusted in height.
Frozen food storage Making ice cubes The compartment marked by the symbol is suitable for storing frozen food and, to obtain the best results, make sure the thermostat knob is set near the coldest setting (if ambient temperature is low-i.e., less than 20°C - it is necessary to adjust the conveyor in such a way as to reduce the temperature in the refrigerator compartment). With this thermostat knob setting, the temperature in the refrigerator compartment could fall below 0°C.
MAINTENANCE Before carrying out any maintenance operation, always disconnect the plug from the wall socket. Periodical cleaning Wash the interior of the appliance with lukewarm water and sodium bicarbonate. Clean cabinet outer surfaces with a silicone-wax spray. The condenser and compressor should be cleaned using a brush or a vacuum cleaner. This latter operation will maintain the appliance’s excellent standards of performance and save energy.