Ceramic hob ZKT 641 F Installation and Operating Instructions g
Dear Customer, Please read these user instructions carefully and keep them to refer to later. Please pass the user instructions on to any future owner of the appliance. The following symbols are used in the text: 1 Safety instructions Warning! Notes that concern your personal safety. Important! Notes that show how to avoid damage to the appliance.
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cooking surface layout . . . . . . . . . . .
Operating Instructions 1 Safety instructions 3 Please comply with these instructions. If you do not, any damage resulting is not covered Safety during use Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive • Remove stickers and film from the glass ceramic. • There is the risk of burns from the appliance if used carelessly.
Description of the Appliance Cooking surface layout Single cooking zone 1200W Single cooking zone 1800W Single cooking zone 1800W Control panel Single cooking zone 1200W Control panel layout Cooking zones and heat setting selection Display On/Off 5
Touch Control sensor fields The appliance is operated using the Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays. Touch the sensor fields from above, without covering other sensor fields.
Operating the appliance Switching the appliance on and off Control panel Switch on Touch for 2 seconds. Switch off Touch for 1 second Display ¾ / Decimal point flashes h / none Selecting the cooking zone Control panel Select Display ¾ Decimal point illuminates Touch 3 The decimal point is displayed by the selected cooking zone. Then a heat setting must be set for this cooking zone within 6 seconds, otherwise it must be re-selected.
Using the child safety device The child safety device prevents unintentional use of the appliance. Setting the child safety device Step Control panel Display 1. Switch on appliance (Do not set a heat set- ¾ / h (if hot) ting) 2. Touch of the front right cooking zone and at the same time 4 x ¾ or h Decimal points flash 3. Touch l of the front right cooking zone Appliance switches off.
Safety cut-out Cooking surface • If after switching on the appliance a heat setting is not set for a cooking zone within approx. 10 seconds, the appliance automatically switches itself off. • If one or more sensor fields are touched for longer than approx. 10 seconds, the cooking surface is automatically switched off. ER03 flashes on the display or changes to h if there is still residual heat. • If all cooking zones are switched off, the cooking surface automatically switches itself off after approx.
Tips on cooking and frying 3 Information about acrylamides According to the latest scientific research, intensive browning of food, especially in products containing starch, may present a health risk due to acrylamide. Therefore we recommend cooking at low temperatures and not browning foods too much. Cookware • You can recognise good cookware from the bottoms of the pans. The bottom should be as thick and flat as possible.
Examples of cooking applications The information given in the following table is for guidance only. Heat setting Cooking process 0 suitable for Cook time Tips/Hints Residual heat setting, Off position Keeping food warm Keeping cooked foods warm as required Cover Melting Hollandaise sauce, melting butter, chocolate, gelatine 5-25 mins. Stir occasionally Solidifying Fluffy omelettes, baked eggs 10-40 mins.
Cleaning and care 1 Take care! Risk of burns from residual heat. 1 Important Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid. 1 Important Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after each use 1. Wipe the appliance with a damp cloth and a little washing up liquid. 2. Rub the appliance dry using a clean cloth. Removing deposits 1.
What to do if … Problem The cooking zones are not functioning. Possible cause No cooking zone selected More than 10 seconds has passed The cooking zones cannot be selected / Appliance does not react to since the appliance was switched on the control panel input Remedy Select cooking zone within 10 seconds of switching on (Decimal point lights up) Switch on the appliance again.
Disposal 2 Packaging material 2 Old appliance The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at your local waste disposal facilities. W The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Installation Instructions Safety instructions The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed. A protective floor must be installed under the appliance. The cut surfaces of the worktop are to be protected against moisture using a suitable sealant.
Electrical Connection Diagram For UK only: 230V...240V~ Sticking on the seal • Clean the worktop in the area of the cut-out section. • Stick the one-sided self-adhesive sealing tape supplied all the way round the lower edge of the cooking surface along the outer edge of the glass ceramic panel. Do not stretch it. The cut ends should lie in the middle of one side. When you have cut it to length (add a few mm), press the two ends flush up against one another.
Assembly 17
Warranty conditions Standard guarantee conditions European Guarantee We, Zanussi, undertake that if within 24 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: • The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
Service and Spare Parts If the event of your appliance requiring service, or if you wish to purchase spare parts, please contact Service Force by telephoning: 0870 5 929 929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www. serviceforce.co.
Rating Plate ZKT 641F PEE2 019 949 591 672 230 V 50 Hz 6,0 kW ZANUSSI 23
822 924 893-C-010805-07 Subject to change without notice The Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.