User manual

• Delayed start
The Selected delay set by pressing the relevant button appears on the display for a few sec-
onds, then the duration of the selected programme is displayed again. The delay time value
decreases by one unit every hour and then, when 1 hour remains, every minute.
• Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example
(see paragraph «What to do if...»).
• Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message
Err is displayed at the bottom of the display for a few seconds and the integrated red light of
button 7 start flashing.
• End of programme
When the programme has finished the flashing zero (
) is displayed, the pilot light 9 and the
pilot light of button 7 go out and the door can be opened.
Washing Programmes
Programme - Maximum and Minimum Temperature
- Cycle Description - Maximum Spin Speed - Maxi-
mum Fabrics Load - Type of Laundry
Options
Detergent Com-
partment
Cottons
90° - 60°
Main wash - Rinses
Maximum spin speed at 1600 rpm
Max. load 6 kg - Reduced load 3 kg
1)
White cotton (heavily and normally soiled items).
SPIN
RINSE HOLD
SUPER QUICK
EXTRA RINSE
Cottons Economy
60° - 40°
Main wash - Rinses
Maximum spin speed at 1600 rpm
Max. load 6 kg
White or fast colour cotton (normally soiled items).
This programme can be selected for normally soiled cotton
items. The temperature will decrease and the washing time
will be extended. This allows to obtain a good washing effi-
ciency by saving energy.
SPIN
RINSE HOLD
EXTRA RINSE
Cottons
40 - 30°- cold
Main wash - Rinses
Maximum spin speed at 1600 rpm
Max. load 6 kg - Reduced load 3 kg
1)
White or colour cotton (normally or slightly soiled
items) .
SPIN
RINSE HOLD
SUPER QUICK
EXTRA RINSE
8
www.zanussi.com