User manual

Setting the time
After the first connection to the mains, all sym-
bols in the display are on for some seconds.
For the subsequent few seconds the display
shows the software version.
After the software version goes off, the display
shows
and "12:00". "12" flashes.
1.
Press
or to set the current hour.
2.
Press
to confirm (necessary only for
the first setting. Later the new time will be
saved automatically after 5 seconds).
The display shows
and the set
hour. "00" flashes.
3.
Press
or to set the current minutes.
4.
Press
to confirm (necessary only for
the first setting. Later the new time will be
saved automatically after 5 seconds) .
The Temperature / Time display shows the
new time.
Changing the time of day
You can change the time of day only if the
oven is off.
Press
. The set time and symbol flash in
the display. To set a new time, use the proce-
dure "Setting the time".
Daily use
Warning! Refer to the Safety chapters.
Setting the Microwave function
1. Turn the knob for the oven functions to
select a microwave function
.
The display shows a default microwave
power and then a default value of the Du-
ration function.
2.
Press
and turn the knob for the tem-
perature / microwave power
to
change the microwave power settings.
The power settings changes in 100 W
steps.
3.
Press
and then / to change the
Duration settings.
The appliance automatically starts to op-
erate after few seconds.
4. When the set time ends, an acoustic sig-
nal sounds and the Microwave function
deactivates automatically.
5. Turn the knob for the oven functions to off
position (“0”).
Caution! Do not let the appliance
operate when there is no food in it.
When the Microwave function is
running you can:
• change the power settings.
•
check the power settings. Press
.
When you open the oven door, the func-
tion stops. To start it again, press
.
Setting the Microwave grilling
1. Turn the function knob to select the oven
function
.
The display shows a default temperature.
2. Change the temperature.
3. Activate the Microwave function. Refer to
“Setting the Microwave function” and start
from point 2.
4. When the set time ends, an acoustic sig-
nal sounds and the oven function and Mi-
crowave function deactivates automatical-
ly.
5. Turn the function knob to off position
(“0”).
Microwave Functions
Oven function Application
Light To activate the lamp without a cooking function.
7
www.zanussi.com