User manual

What to do if…

Warning! Refer to the Safety chapters.

Problem Possible cause Remedy

The appliance does not heat up. The appliance is deactivated. Activate the appliance.

The appliance does not heat up. The clock is not set. Set the clock. Refer to "Setting the

clock".

The appliance does not heat up. The necessary settings are not

set.

Make sure that the settings are

correct.

The appliance does not heat up. The automatic cut-out is activa-

ted.

Refer to “Automatic switch-off”.

The appliance does not heat up. The fuse is released. Make sure that the fuse is the

cause of the malfunction. If the

fuse releases again and again,

contact a qualified electrician.

The lamp does not operate. The lamp is defective. Replace the lamp.

The display shows an error code

that is not on this list.

There is an electrical fault. • Deactivate the appliance with

the house fuse or the safety

switch in the fuse box and acti-

vate it again.

• If the display shows the error

code again, contact the Cus-

tomer Care Department.

If you cannot find a solution to the problem

yourself, contact your dealer or the service cen-

tre.

The necessary data for the service centre is on

the rating plate. The rating plate is on the front

frame of the appliance cavity.

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................

Technical data

Voltage 220 - 240 V

Frequency 50 Hz

Environment concerns

Recycle the materials with the symbol . Put

the packaging in applicable containers to

recycle it.

Help protect the environment and human health

and to recycle waste of electrical and electronic

appliances. Do not dispose appliances marked