Ceramic glass hob Table de cuisson vitrocéramique Glaskeramische kookplaat ZKF 661 LX Installation and Operating Instructions Instructions de montage et mode d’emploi Montage- en gebruiksaanwijzing g f l
Dear Customer, Please read these user instructions carefully and keep them to refer to later. Please pass the user instructions on to any future owner of the appliance. The following symbols are used in the text: 1 Safety instructions Warning! Information that affects your personal safety. Important! Information that prevents damage to the appliance.
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cooking surface layout . . . . . . . . . . .
Operating Instructions 1 Safety instructions 3 Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty. 5 This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Correct use • This appliance should be used only for normal domestic cooking and frying of food.
Description of the Appliance Cooking surface layout Single cooking zone 1200W Double ring cooking zone 700/1700W Singlecooking zone 1200W Double ring cooking zone 750/2200W Residual heat indicator Hob Cooking Zone Control Knobs Assignment of control knobs 5
Control Knobs The cooking power can be set anywhere between level 1 and 10. 1 lowest power 10 highest power 0 Off position Z Connection double ring cooking zone Residual heat indicator The residual heat indicator lights up, as soon as the corresponding cooking zone is hot. 1 Danger! Risk of burns from residual heat. Af2 6 ter being switched off, the cooking zones need some time to cool down. Look at the residual heat indicator. Residual heat can be used for melting and keeping food warm.
Operating the appliance 3 When a cooking zone is switched on, it may hum briefly. This is a characteristic of all ceramic glass cooking zones and does not impair either the function or the life of the appliance. Setting the heat setting Heat setting Ring control knob Knob setting To increase turn clockwise 1 - 10 To reduce turn anti-clockwise 10 - 1 switch off 0 1. When boiling water/searing food, select a high heat setting. 2.
Tips on Cooking and Frying 3 Information on acrylamides According to the latest scientific knowledge, intensive browning of food, especially in products containing starch, can constitute a health risk due to acrylamides. Therefore we recommend cooking at the lowest possible temperatures and not browning foods too much. Cookware • You can recognise good cookware from the bottoms of the pans. The bottom should be as thick and flat as possible.
Examples of cooking applications The information given in the following table is for guidance only. Heat setting Cookingprocess 0 suitable for Cooking time Tips/Hints Residual heat, Off position Keeping food warm Keeping cooked foods warm as required Cover Melting Hollandaise sauce, melting butter, chocolate, gelatine 5-25 mins. Stir occasionally Solidifying Fluffy omelettes, baked eggs 10-40 mins.
Cleaning and Care 1 Take care! Risk of burns from residual heat. 1 Warning! Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid. 1 Warning! Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after each use 1. Wipe the appliance with a damp cloth and a little washing up liquid. 2. Rub the appliance dry using a clean cloth. Removing deposits 1.
What to do if … Problem Possible cause Remedy The cooking zones are not functioning. The desired heat setting is not set. Set the heat setting. The fuse in the house’s electrical wiring (fuse box) has been tripped. Check the fuse. If the fuses trip a number of times, please call an authorised electrician.
Installation Instructions Safety instructions The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed. A protective floor must be installed under the appliance. The cut surfaces of the worktop are to be protected against moisture using a suitable sealant.
Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners. In order to be able to assist you quickly, we require the following information: – Model description – Product number (PNC) – Serial number (S No.
Assembly / Montage 38
39
40
41
Rating Plates / Plaques signalétiques / Typeplaten ZKF661LN PE E20 15 230 V 949 591 119 50 Hz 6,3 kW ZANUSSI ZKF661LX PE E20 15 230 V 949 591 120 50 Hz 6,3 kW ZANUSSI ZKF661LX PE E20 15 230 V 949 591 807 50 Hz 6,3 kW ZANUSSI ZKF661LX PE E20 15 230 V 949 592 391 50 Hz 6,3 kW ZANUSSI 42
43
822 925 423-B-150905-02 Subject to change without notice Sous réserve de modifications Wijzigingen voorbehouden The Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.