Electric Ceramic Hob ZKF641H Operating and Installation Instructions
User Instructions Important hints on safety Description of the appliance Before first use Operating Instructions Ceramic glass surface Heat Controls & Settings Residual heat indicator Pots and pans Energy Saving tips Maintenance and Cleaning Something Not Working Customer Care Service and Spare Parts Guarantee Conditions Service Force Centres Installation Instructions 3 4 4 5 5 5 6 6 6 7 8 8 8 9 10 Technical Details Unpacking and Disposal Installing in the kitchen worktop Building-In Electrical Connection
This safety information is provided in the interests of your safety. Please read it carefully before installing or using the hob. If you are unsure if the meaning of any of the warnings please contact our Customer Care Department. Installation • This appliance must be installed by a qualified electrician / competent person, according to the manufacturer’s instructions and to the relevant British Standards. • Remove all packaging before using the appliance.
1. Cooking Zone ø 180 mm 1800 W 2. Cooking Zone ø 180 mm 1800 W 3. Cooking Zone ø 145 mm 1200 W 4. Cooking Zone ø 145 mm 1200 W 5. Residual Heat Indicator 6. Heat setting control knobs Voltage AC 230 V Total connected Load 6.0 kW Please check that the appliance was delivered in perfect condition. Appliances with obvious transport damage must not be connected to the mains. First Cleaning In order to remove any remnants left by production, clean the hob before it is first use.
Ceramic glass surface The cooking surface is made of proven ceramic glass. The surface is non-porous and, in addition, insensitive to quick variations in temperature. Therefore pots may be moved from a hot to a cold zone. When switching on the cooking zones you may hear a short-term audible buzzing sound of the radiant elements. This will not harm the performance of the appliance. Keep all objects and materials that might smelt away from the heat zones.
Residual Heat indicator Each cooking zone is related to one indicator. The warning lamp illuminates when the surface of the corresponding cooking zone reaches a temperature which could cause burns. The indicator remains illuminated after the area heated has been switched off as long as the residual heat of the corresponding cooking zone could cause burns. The light will go out when the temperature falls below 60°C. Saucepans and frying pans.
Before cleaning, make sure that the hob is cool and disconnected from the power supply. Never use aggressive or abrasive agents, such as oven sprays, stain or rust removers, scouring powder, or sponges with an abrasive effect. Special cleaning agents such as Vitroclen and ceramic glass scrapers are available from department stores and electrical specialists. Cleaning after each use • Slight, non-burnt soiling can be wiped off with a damp cloth. • Burnt soiling has to be removed with a scraper.
If your hob is not functioning correctly please carry out the following checks before calling out an engineer. Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. Symptom • Possible Solution • • • The cooking zones do not function. Check the mains has not failed. Check a power level has been selected.
We Zanussi undertake that if within 24 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, the company will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electrical supply stated on the rating plate.
To contact your local Service Force Centre telephone 08705 CHANNEL ISLANDS GUERNSEY Guernsey Electricity PO Box 4 Vale, Guernsey Channel Islands GY1 3AD JERSEY Jersey Electricity Company Haut De L’orme Rue De Haut De L’orme Trinity Jersey Channel Islands JE3 5FG SCOTLAND ABERDEEN 54 Claremont Street Aberdeen AB10 6RA AUCHTERMUCHTY 33a Burnside Auchtermuchty Fife KY14 7AJ BLANTYRE Unit 5 Block 2 Auchenraith Ind.
To contact your local Service Force Centre telephone 08705 MIDLANDS BIRMINGHAM 66 Birch Road East Wyrley Trading Estate Witton Birmingham B6 7DB BOURNE Pinfold Road Bourne PE10 9HT BRIDGNORTH GLOUCESTER HEREFORD HIGHAM FERRERS 68 St.
Please examine the appliance for any damage. If the appliance is damaged contact your retailer before the appliance is connected. Please keep packaging away from children and dispose of with due regard for the environment. Measurement of: Worktop Opening Appliance: Width: 560mm Width: Depth: 490mm Depth: Corner Radius:5mm Height: Important Safety Requirements Voltage: AC 230 V 50 Hz/60Hz Total Connection Load: 6.0kW • The hob must be installed by a qualified electrician / competent person.
When building in ceramic glass cooking areas the front cross-rail of the build-in cupboard must be removed in order to have the heat radiating off escape without any obstacles. of need for service, and may damage the worktop if removing the hob. 5 holes in the bottom of the build-in case are provided for the screws of the fitting plates. The space under the hob unit must be closed at all sides in a way that the lower side of the cooking area is no longer accessible.
Electrical Connection The mains connection must be carried out by an expert electrician. The VDE-regulations and the valid prescriptions by the local power supply boards have to be compiled with. Prior to connection it should be checked whether the voltage stated on the type plate - i.e. the nominal voltage of the appliance and of the oven/control box – is identical with the prevailing mains voltage. The rating plate is located on the hobs bottom. The heating element voltage amounts to 230 V ~ .
14
© Electrolux Household Appliances Limited 2001
