User manual

18
Positioning the door shelves
To permit storage of food packages of various sizes,
the door shelves can be placed at different heights.
To make these adjustments proceed as follows:
Gradually pull the shelf in the direction of the arrows
until it comes free, then reposition as required.
Movable shelves
The walls of the refrigerator are equipped with a
series of runners so that the shelves can be
positioned as desired.
For better use of space, the front half-shelves can lie
over the rear ones.
D711
D587
Use and features of the «CRISP’N
FRESH»filter
The glass shelf on top of the vegetable drawer is
fitted with a special filter called «CRISP’N FRESH»
which ensures the correct amount of ventilation, and
significantly reduces the rate of food dehydration;
vegetables therefore store better and keep longer.
Cleaning the filter
The filter is held by two small support frames which
press into position and are therefore easily removed
for clearing. To do this, turn the glass shelf upside
down and release the frames as shown in the
illustration. The filter may be washed in normal
washing-up liquids. Do not place in dishwasher.
D338
39
D729
G
H
G
O aparelho está equipado com duas esquadrias (G)
para a fixação lateral ao móvel (veja a Fig.).
8mm
PR167
A
B
PR168
PR167/1
D
B
Abra a porta do aparelho e a do móvel a 90° aprox.
Insira a esquadria (B) na guia (A). Mantenha juntas
a porta do aparelho e a do móvel e marque os furos
como indicado na figura. Retire as esquadrias e
realize uns furos de ø 2 mm a 8 mm do bordo
externo da porta. Posicione novamente a esquadria
por cima da guia e fixe com os parafusos anexos.
Para a eventual operação de alinhamento da porta
do móvel, utilize o jogo das aberturas ovaladas.
No fim da operação, é necessário verificar se a
porta do aparelho fecha correctamente.
Engate a cobertura (D) na guia (B).
Depois de mudado o sentido de abertura da
porta, controle se a vedação magnética fica
pegada ao móvel. Nesse caso, pode esperar pela
natural recuperação da vedação ou tornar mais
rápido esse processo aquecendo a parte
interessada com um normal secador de cabelos.