User Manual

If the appliance is fixed to the side of the kitchen unit,

simply slacken the screws in fixing brackets (E),

move the brackets as shown in the figure and re-

tighten the screws.

PR168

PR167/1

Should adjustment of the furniture door be

necessary, use the clearance of slots as required.

At the end of operations, it is necessary to check if

the door of the furniture closes properly.

Fix cover (D) on guide (B) until it clips into place.

After completion of the door reversing operation,

check that the door gasket adheres to the cabinet. If

the ambient temperature is cold (i.e. in Winter), the

gasket may not fit perfectly to the cabinet. In that

case, wait for the natural fitting of the gasket or

accelerate this process by heating up the part

involved with a normal hairdryer on a low setting.