User manual

16
Installing the mantle on the hood
Installing the mantle can also be carried out
after having installed the motor unit at the wall.
This makes installation easier because the
weights and dimensions of the parts to be
mounted are relatively limited.
On the contrary, installing the mantle before
installing the hood to the wall allows checking
the set up and position of the hood to the wall.
Proceed as follows:
• Remove the fat filter and the carbon filter
holder frame.
• Put the motor unit on the table (if it has not
already been installed on the wall).
• Put the mantle on the wheels of the motor
unit through the slot of the mantle, until
reaching the end.
Attention! Check that the electric cables are
not damaged during this operation.
• Fix the mantel to the motor unit with 8
screws.
• Connect the control panel and the lights.
8 x
Ø 3,5 x 9,5
CLACK!
Installation