Technical information

INSTALLING THE COOKER HOOD
Please ensure that when the appliance
is installed it is easily accessible to an
engineer in the event of a breakdown.
All installations must comply with the
local authorities requirements for the
discharge of exhaust air.
Incorrect installation may affect the
safety of this cooker hood.
Installation Requirements
Before installation check that the wall
to which the cooker hood is to be
fitted for electric cables, water pipes
and gas.
This cooker hood is designed to be fixed to
any vertical surface over a cooking area, and
can be used in the extraction (ducted to the
outside) or recirculation mode.
The installation work must be undertaken by a
qualified and competent person.
10
The manufacturer disclaims any responsibility for
damage due to incorrect installation of the cooker
hood or if the hood is not installed in compliance
with relevant regulations controlling this type of
installation.
Unpacking
The hood is supplied with the following
components for installation as illustrated.
Item Qty Description
1 1 Hood body, complete with:
Controls, lighting, blower and filters
2 1 Telescopic chimney comprising:
2.1 1 Upper section
2.2 1 Lower section
3. 1 Ø120-125mm Ducting collar
9 1 Ø150-120mm Ducting spigot
14.1 2 Recirculation outlet ducting
extension
15 1 Recirculation outlet connection
7.2.1 2 Upper chimney fixing brackets
7.3 1 Reciruation outlet support
11. 6 Rawl plugs
12a 6 4.2x44.4mm wall fixing screws
12c 6 2.9x9.5mm chimney fixing screws
1 Instruction Manual
2.1
2.2
2
12c
12a
7.2.1 11
11
12a
1
9
7.3
14.1
15